CAT Filters on my CUMMINS!!! Here's HOW!!!

[@433honda334]

People out here sleeping on Greg A. Makes some pretty solid content, it at times can be dry when he is explaining, but that is anything unless you are after something with that. He does a good job at trying!

[@CanadianGearhead]

Some of the nicest Dodges on the interwebs. I'm not a Dodge or even a diesel owner, but I still find this channel awesome. Keep up the good work.

[@welcometolifeasaredneck3108]

Man I've been watching you for awhile and damn you've gone from two trucks and a at home garage to four trucks and a shop, keep making vids Greg, love the trucks

[@idahobuckaroo8348]

Greg, I agree -- the new valve cover looks better than OEM for sure on the dually. Also, the CAT fuel filter conversation is a great idea too. Thanks for sharing the cool ideas -- very helpful. Much appreciated.

[@warden6.7]

GregA is there a reason you didn’t go with the Fleece fuel filter delete and run both under the bed? I’ve been thinking of going that route due to changing my filters every 10000 miles. Gets to be ridiculous buying those Mopar filters. Love the look of the 4th gen. Keep up the great vids.

[@colehumrichouser5211]

Should put a wrench workz sticker right in the middle of the valve cover!!! Love the videos! I learn so much from your videos and also helps me understand why some things work better than other!

[@robertwilbert1317]

I was thinking the same thing...that would look sick...

[@LonnieHutchinson90]

I watch all the big KZbin channels on a daily basis but YOU HAVE THE BEST CHANNEL EVER IM A DIEHARD FAN!!!! Keep the awesome videos coming !

[@wowffdp]

It’s great weather for the new hoodies, ordered mine at 12:30 on the launch day and got it yesterday, love the quality and it fits well

[@Jroberts0709]

Greg, I am surprised you didn’t powder coat the polished filter housing..... matte black?

[@Jon-O.]

Black anodizing is what is done with aluminum

[@johnsigafoose6243]

The 1st gen and the dually are by far my favorite builds. And I have been watching your videos sence you had 17 followers.

[@tylerjerome3317]

Been with you sense you started your KZbin channel and I watched your first video you put out and I was hooked and I watch all your videos I have learned so much from watching your videos thanks man

[@_greg_a]

Thank YOU for all the support Tyler!!

[@mikereynolds148]

I just installed this fuel filter yesterday, pretty easy install took me about a hour. The one thing they don’t tell you on the install video is the plug for the fuel warmer isn’t needed anymore and stay unplugged (unless you buy the black market fuel warmer) other than that it’s a really basic job

[@noelybarra1769]

Not to be hating, but to those who keep asking for the old gang...get over it already. Keep up the great work Greg!

[@RobertHasty]

First part of video, that thing sounds so nice.

[@chrischristian5708]

Looks awesome man. You should be sponspred by the color black lol

[@danielgolightly784]

Bruh🤣🤣🤣🤣

[@hickboy3067]

I installed the additional cat filter above the rear axle last year on my 18 Ram 3500. Made by Diesel filters com.. it just threads in right next to the water separator.. (stock fuel) yet .

[@DownSouthSilverado]

Those paddle shifters are so sick!

[@LonnieHutchinson90]

You should get that valve cover laser engraved and put your wrench works logo on it

[@traviskorda3262]

I just ordered the kit from Dirty Diesels that comes with the Fleece delete for the fuel bowl on the engine block and all the lines and stuff u need to relocate the cat filter under the truck next to your H20 separator. When I eventually do fuel upgrade I'm planning on running the Fleece in tank pump so I thought it seemed like a complimentary set up. What do u guys think? Pretty much same difference as the BMP set up just easier to reach for future filter changes

[@thecapncd]

You should get wrenchworkz engraved on the value cover!!

[@_greg_a]

We might be working on something soon!

[@christopherkuhar2965]

Greg did you have any issues with the water separator leaking fuel. From what im hearing the bmp fittings are 0.12 inches smaller than factory

[@joelfromportland]

The location of the fuel filter on these 3rd & 4th gen socks. I did an Amsoil remote mount filter and water separator. Much easier to change/drain. Mounted under truck.

[@LonnieHutchinson90]

Those paddle shifters are almost the best MOD on the channel yet !!!

[@ethankirk3115]

Greg love the videos, but your killing me with this whole first gen situation !!! The 05 and fourth gen are perfect, it’s first gen time !

[@khalidjurdi3958]

Greg why did you change out the factory CCV? What's the problem with it and why does it hurt or not hurt the truck? What are the benefits of running that and blocking those lines?

[@Bear_schacht]

Is there a cat filter assembly for early 04 Cummins? I can't find one for this year been looking for awhile maybe someone now somewhere that has this kit thanks again Greg for another awesome video

[@moik145]

Thanks for the video @GREG_ALBERALLA trying to learn as much as I can on the 4th gens.Plan on buying one in about a year.

[@repairvehicle]

Ram could not find better place for fuel filter than placing above the drive shaft. Any leaks with cat filter system or dislike?

[@DeerHunterpower]

Love the videos keep up the good work Greg 🤘🏼🤘🏼

[@repo4sale]

I'm at over 400,000 using china fuel filters/front and back/ change every 10k. Engine runs smooth, mpgs 24-31 freeway. 2015 Ram Cummins 6spd. Amazon price both $25 pair shipped. And to solve the leaks and fuel cap problems, use about 1 spoon of grease on the threads, stops leaks, makes it super easy to tighten & remove cap. I use 2 o/Rings, at top of cap and bottom of container tread. Never broke a plastic cap yet or leaked fuel with grease.

[@unknown_truckers]

Same bro, this kit is overkill even if you're hauling 30 k gross for a living, a replacement metal cap is easier and cheaper to install.... although not as cool maybe if I worked at cat I could see the discount advantages

[@mikereynolds148]

I just changed mine from factory to black market. The factory kept leaking and was making me crazy I was also using the amazon filters I didn’t think about grease on the threads

[@jacksonn.2399]

I think the new factory 6.7 engine bay has taken a hit in terms of accessibility and cleanliness. Of course getting rid of egr and all of the other junk helps (the answer is yes), but under the hood of the 6.7 was never my thing. Just my .02. You the man greg a.

[@thorkmoore]

I wish i keep up with you on buying parts! It must feel like Christmas every day, is Christmas even fun anymore 😂

[@JA-ux7dd]

Always drain the filter housing before trying to remove the filter cap, the internal pressure is part of the filter cap removal issue...

[@prestoncole539]

Got my order in !! Have 1 of all your shirts and the most comfortable hoodie ever lol keep up the great work

[@_greg_a]

Thanks for the continued support Preston!!!

[@sarastewart6541]

Hey have you every had anything happen with your 5.9? Like the fuel cut off relay or the fuel cut off solenoid. Cause one of those things is bad on my truck. This is the only thing that has ever happened with my truck. It had to happen and leave me stranded for a day.

[@tgosss]

Hello Greg, my name is Thiago Almeida, I'm Brazilian and I'm following your channel, I have a Dodge ram 2008 (3 gen), where I live has no one to fix it, I'm thinking that my second gear is skating(48re), could I post a video how to regulate it?

[@johnameil3411]

I have two trucks and never had a problem with the plastic cap, both trucks are 16 years old.

[@just-coler4427]

Hey Greg why didn’t you just throw an air dog on it? And get rid of the factory fuel filter housing all together? Maybe you answered it but just curious.

[@chevyon37s]

Everybody needs a good buddy Mark.... I need some paint work done 😂

[@haymaker3046]

Hey Greg - just installed the cat filter kits on my truck - went to reset my fuel life monitor and it reset the mileage but didn’t reset the percentage bar? Is this common because of the other sensors that are unhooked?

[@hectoribarra00]

love your videos keep up the good work!! and I wanted to ask if you can do a video on the bypass oil filter's and is it worth the money?

[@tater0909]

I've been thinking about installing this filter set up on my cummins. Does it work under stock fuel pump? Or should an upgraded fuel sending unit be installed also?

[@colehumrichouser5211]

Would you be able to make a video on what fuel setup it takes to make an 800hp daily driver Cummins. Or even a video explaining a full build setup to a 800hp daily driver

[@dodgedually6009]

You need to check out trigger industries mud flaps for your trucks

[@17buckrogers]

would you consider putting a oil centrifuge on your trucks they clean better than filters just takes a little maintenance of cleaning it out every once in a while

[@SteveCTD]

I have a kit from Throttle-up Industries that mounts next to the water separator you changed, uses the same cat filter. What are your thoughts on running this kit in conjunction with the other? Giving you 2 cat fuel filters and a water separator. Thanks.

[@jonniewalker1725]

It's cold where you live, do you have any issue with not having the fuel heater due to it being removed?

[@tater0909]

Does the truck have to be deleted to add this fuel filter? Or will it work with stock set up?

[@dereklong4945]

Need to do an air dog 4g and be done with the fuel project! While you are at it do a 55 gallon Titan direct replacement tank, makes a great tow set up!

[@hardtruth2039]

Will this CAT filter mod void my 2018 Ram warranty?

[@Pepe46873]

Looks pretty damn sexy and Cat yellow adds hp. I can’t believe how much dodge bends you over for a shitty paper filter. A set of Donaldson’s for a Fass is about 1/3 the oem paper filter lol.

[@the.russianbear]

Cat filters are probably the best filter your could go with compared to Donaldson or Fleet Guard. They are a smaller micron filter compared to other brands, because cat engines are VERY picky, I’ve seen a few 3406e cats spit tips off of the injectors because the one guy that had worked for my father thought that a Fleet guard would be good enough

[@Zuk_4_life]

Man wish I had Greg A money.

[@Lee01Mr]

With a cat filter your cat is purring now greg!

[@CarpenterBee515]

Must you fill the filter up with fuel before installing??. I can't seem to get mine to prime up

[@mikereynolds148]

Lift pump might be bad

[@FoursquareT]

My life wouldn’t be be complete without a Greg A delete:)

[@MAGADT]

Need more Jessie and Johnny!!

[@Brandon-jo7nc]

What did you do with you crankcase pressure sensor? Is it left out with the new valve cover?

[@FURFEELINGS_3]

That valve cover what’s the thing on top? Does it delete the ccv?

[@DynamicDiesel]

The more parts the dually starts missing the better it will be;)

[@_greg_a]

YES!!!

[@ryankovaly3927]

valve cover is awesome greg! would be awesome with a wrench works logo machined into it :P

[@MichaelsGarage23]

Sorry, I'm not going through all messages. Do you have a part # for the crank case vent block off plate?

[@andyanderson6335]

Michael Catignani that’s what I’m looking for!

[@CarbonPower]

What transmissions are you running? I wouldn’t dare to that with my 68RFE

[@ericbrown4033]

Ummmm are you not putting an AIRDOG set up on this one? Always a great vid! Your Awesome! Best wishes to you and your family!

[@_greg_a]

I LOVE Airdog's! but we are doing something slightly different on this one!! Coming Soon!

[@ericbrown4033]

Awesome can't wait to see!!

[@bornbehindbars2010]

Eric brown most likely a fleece in take lift pump

[@drydanhowrey8579]

If you have a fass or lift pump does this have any use anymore

[@JMSynthetics]

How was the install of the fuel filter delete replacement, been trying to get ahold of BMP since you posted this video and they haven't gotten back to me

[@JMSynthetics]

Also what do you do with the other factory electrical connector from the factory canister

[@BlueCollar_Motorsports]

Oooooo sweet jones! Where do I get that steering wheel and paddle shifters

[@gerardmulder7298]

Greg why did you go with the CAT filter and not but a airdog unit on the dually

[@alansousa2488]

What are the advantages compared to cat and mopar? and have the link to buy the complete kit?

[@billycook3523]

Where do you hookup the other sensor on the filter housing

[@atctraveler6218]

$340 for a fuel filter change at the stealership. Filters were $190. $118 labor and a $30disposal fee...

[@BWT7210]

What I want to know is will there be a check engine light popping up after the CCV delete, with that new valve cover. I have the truck deleted with an H&S mini Maxx. It’s a 2012. Does anyone know? Or should I just get on a forum and ask...?

[@brycemartin3626]

What kind of mpg are you getting with the compounds on your duelly

[@brendaleetv]

If I add that Banks Monster ram "arm" to my 2017 Ram 2500 diesel, would that void my warranty? I know a delete system would. Also, if I replace the factory turbo spool to an aftermarket better one, and if I take off the turbo silencer ring would that void my factory warranty? The turbo silencer ring on my 2017 has 3 studs that they would have to be drilled out. Any comment on this?

[@monsterram6617]

I'm not quit sure how familiar you are with the 6.7 Cummins but you'd have to be tuned & delete the EGR & EGR cooler to even be able to use the Bank's intake horn... which, of course, would void your warranty. About your turbo question; yes if you do anything to it, like the rest of the truck, you've basically voided any warranty you have on the powertrain. In your case, you should probably leave it alone or have a professionally built unit installed. Turbos spin incredibly fast (120,000+RPMs) and any minute deviation in balance with cause a catastrophic failure. You should certainly *not* remove the "silencer ring" because your HE351VE doesn't have one. Removing that part of the turbo will only make more noise by increasing air turbulence and thus reducing airflow efficiency; it is there for a reason. Hope this helps.

[@hunterprowsemrereviews9141]

Awesome awesome video Greg A, more Dually deletes and mods lol, loving those center caps Mark did up.

[@tzimmy69]

You need to paint the cat filter black before you put it on😁

[@skinlab4239]

There is law against that.

[@jordanellis8933]

Greg when will we learn more details about the new race truck!

[@Regal2800]

Keep the 4th gen vids coming!

[@jmc6940]

What is the factory filter micron rating vs the cat filter?

[@paulrollinsjr.1845]

GREAT buddy Marc! Very nice work sir. Greg thank you for another great video. #WRENCHWORKZFAITHFUL🇺🇸

[@tommyguns14able]

Greg must know where the forest of money trees is.

[@rosse.8304]

No doubt eh

[@jaredanthony8070]

He does KZbin, works for a drilling company, sells wrench works gear, gets occasional sponsors or free parts, and occasionally works on other people's stuff for injectors or valve springs etc.. he planted his own money tree and pays for the water and fertilizer 😂

[@antwainhuntersr.4459]

Can you drain the front cat filter like the option the factory filter give you?

[@sheldonallison855]

Did you have to cut the water/fuel sensor wire out?

[@zachmccutchan9139]

your bros at fleece seem to think the factory filter system cant be beat thats why they have there dual in tank pump system. you dont think so?

[@jaredanthony8070]

His complaint seemed to be cost of filters and changing them every 10k miles

[@tylersmith6254]

Wish I would’ve known about this cat kit I bought the one that goes by the fuel/water separator

[@monsterram6617]

Why, that one is better.

[@tylersmith6254]

Monster RAM well it’s a beach to install and you still have to have the front filter in and have to replace it they’re similar in cost but I don’t Like still replacing 3 filters now instead of 2 and saving money

[@joeys71182]

Install the fleece fuel filter delete then the factory filter is gone. I wonder how big of a mess the cat filter under the hood will make when changing it?

[@tylersmith6254]

Joey Smith you can’t run the fleece delete with the kit by the fuel water separator.... not like a FASS set up... the return line or something is issue it’s stated on igotacummins.com

[@Bigdaddyslasher]

How long will that last on the Cummins miles or gallons?

[@glennrobinson1357]

Fuel filter looks good but kinda dont like that the water sensor is at the very top of the housing so it means your whole filter will have to be filled with water before it turns the light on.

[@monsterram6617]

Actually, no. The fuel flows past the sensor before it reaches the filter. If the sensor detects water, it will trip the WIF alarm.

[@BLBfive]

has anyone ordered and did you receive it? going on 2 weeks for me now with no response to emails or calls

[@geralda3356]

What size are your wheels and tires setup

[@joeminer4261]

why is the abs light on. as always thank you for your informative videos.

[@_greg_a]

I think we might need a RF hub bearing, we tested and it isn't reading anything with a meter

[@GRivera379]

Sometimes I hate coming early because there’s no comments to read

[@levijackson3797]

Just a bunch of mouth breathers writing first..

[@jdkirane7990]

@@levijackson3797 Lol this is so true!

[@florabama_weldz]

I never come early..... she gets mad if I do.

[@boydboys9084]

Travis Boyington lmao

[@truckcampertraveler7369]

Travis Boyington she must get mad often

[@MKSPerformanceOffroad]

Fixing to do the same those filters are ridiculous! Are yall goin both days to Rudy’s event? Great video!

[@_greg_a]

YUP! All weekend!

[@MKSPerformanceOffroad]

GREG_ALBERALLA nice I’ll see ya out there on friday. You guys bringing any wrenchworkz gear to sell?

[@_greg_a]

YES SIR! see ya there!

[@dunderland241]

Paddle shifter on the dually!

[@_greg_a]

Noooo something even cooler possibly down the road!

[@billstewart3592]

Would you recommend doing this on a 5.9 3rd gen

[@_greg_a]

Currently for a truck that does not come with a water separator I would still recommend a full Airdog 4G kit

[@brantr7582]

We just need more about Greg videos haha

[@devingregory4450]

Where's the rudys event going to be at?

[@Amxracer]

Very cool 😎 !

[@joemize3375]

What did you do with the sensor on the ccv filter?

[@DBGrimson]

Hey buddy I watched the last video with the paddle shifter what parts did you all use from the trans up to the paddles if you dont mind me asking.

[@_greg_a]

All of the details are in both paddle shifter videos, there is 2, any other questions I would ask Muldoons, they can help and offer this as a kit on their website!

[@DywayneWalker]

Hey Bud It's wireless

[@oriansinkleryukon2680]

Why did you do this install are these filters better