A beginner’s guide to LS swapping an old chevy G-body

Hey beautiful gals and guys, I decided to go back to my old formula for making these videos! #chevrolet #lsswaptheworld #lsswap #lsswapped #silverado #bmw #coyoteswap

[@racingjunk7024]

Glad you giving people good advise not the cheapest way that always ends up costing more .

[@Texasmule]

Not really unless you have a high limit

[@MisterMachete]

@@Texasmuleshut up hater

[@FranksShitBoxCollection]

Honestly a lot of the stuff that he mentions, unless you're going for big power numbers, isnt needed.

[@-igotwhateva9771]

@@FranksShitBoxCollectionexactly

[@bumblebeeisfree]

Love it man. You made me look at muscle in a different light ever since like a year a go in tiktok.

[@jordanwiley4582]

If you're under 400hp (stock ls pretty much), just redoing the suspension with adding factory type bracing, rebuilding the brakes with stock stuff, and adding a good performance shock with stock Grand national or monte SS spec springs is perfectly fine. I've done all that to my car and I get pretty hairy with it and it's always been a great driver.

[@stebonblamcard1390]

You forgot about suspension bushing but just hope no one reads my reply so they fuck up there chasis

[@Texasmule]

400HP isn't stock. Without boost 75% of new era cars wouldn't touch shit on old school just saying

[@stebonblamcard1390]

@@Texasmule lol

[@stebonblamcard1390]

@@Texasmule your wrong you have to put all the new shit on the old shit so it is somthing bruv

[@pmotorsports8276]

Cheap stock brake upgrade. 98 and up Blazer (spindle calipers)

[@motorcopT2]

“N you done tore your car up”😂🤣 Man I enjoy your videos on LS stuff. ❤

[@alansoler2653]

I love those G body's. I also own a 88 IROC-Z convertible.

[@brightcreep1]

We need one for the A- Body cars. Good channel!!!

[@redbuick]

Awesome man. Back in the say peolle thought those smog choked 305 chevy v8 were the shit. I had a 87 307 olds in my 1979 cutlass with a ported 4brl. Not a powerhouse but a daily driver. An ls swap will make a monte ss the car gm could have built.

[@gbodytoys]

Always here for the Gbody content.

[@mrjvmccall]

Great video. Keep up the good work.

[@bearbino2646]

Love these videos

[@jerrysummer69]

Bro you’re a legend

[@jordanwiley4582]

Me over here with my small block Buick 350 :P

[@stevenallen6245]

My 84 olds 2door got a 72 olds 350 with all the goodies but im adding a quadrajet holley efi on top of my baby never ls swapping my olds cutlass but i will a Monte carlo when i get my hands on one no roof or t-tops love the hard-top g-bodys 💪🏾💪🏾that's jus my preference but lov all g'-body's tho..

[@jmend512]

Adding hp and most likely bigger wheels, you definitely need to upgrade the brakes. Seen so many vehicles with good looking interior and a nice engine but still have 30 yr old brakes 😂

[@lilpacman204]

Need some help brother I gotta worktruck that I absolutely love it's not the wrong with it it's just getting higher in mileage it has the 6.0 I think it's the LQ4 engine Wanted to know what would be a good route to Do A Rebuild Would Like A Little Bit More Horsepower and More Torque Currently Pulling around a 7 by 14 trailer and go through the mountains pretty often but I also need something reliable as well Would like to know your thoughts

[@gbody_gang5023]

Spitting facts #subscribed

[@123bigred]

good advice

[@jshwDA9]

Keep it up fam. Teach em how to serve up dat gap sauce

[@ninodadonn720]

I have a 2004 gmc Yukon alt with the 5.3 I was looking into a Gbody cutlass swap what kind of wiring harness would I need ??

[@realphillystreets]

Good shxt !!! Thanks

[@joshuafoster7931]

This dude is the Benjamin bnniker of cars

[@cranegangpaperchasinn7739]

Need more videos on a 91 Chevy caprice bbody ls swap

[@liltraphouse1076]

Was going to go this route with my 84 cutty. Then a real 350 rocket fell in my lap .200r4 going in rn . Building the 350 block and ford 9inch next mods. Any advice on a olds 350 block .

[@benmisner6457]

Cutty dopest g body for sure

[@racingjunk7024]

Aluminum heads ,rod bolts , main studs . Port all oil gallys.and a decent cam and enjoy .

[@uncleb.cooking]

Try to find a 400 turbo transmission or L80 like he said,that 200 r4 will not last

[@vcalv9354]

I got an 84 cutlass supreme brougham that I'm thinking about ls swapping.

[@darrenporsch]

You should mention the much cheaper brake swap kits where you go with LS1 or later model Camaro and Corvette brakes

[@anthonyperkins6375]

Could you do one for Iroc camaro

[@nathanwood1567]

Most Yukon came with the 6.0 The tahoes came with the 5.3 and 4.8

[@isaiahanonymous5898]

Do an ls swap week for best ls swap’s and what not to do with em

[@damiangraves9794]

Can you make videos on how to swap a 02 5.3 chevy into a 88 Thunderbird floor shifter sport v8

[@royalexclusivedetailing7532]

You can also go cheaper than that by going to the junkyard pulling out some disc brakes off of a 1995 Trailblazer which is direct bolt on all the way I'm running Wildwood if I'm going 6 Pistons other than that give me some of the 1995 Trailblazer

[@michaellingo640]

I would love to hear your thoughts and opinions on EFI systems. I know you are The LS GURU/ WHISPERER but what about those systems with the carb. Speaking personally, I really don't want to go back through the hassle of LS Swapping. Thanks and God bless.

[@williamcurry6412]

Bro, what’s the difference between a 4L60-E and a 4L65-E? Doing a 6.0 in my 1970 Cadillac DeVille convertible and considering a LSA supercharger. Thinking about a 4L80-E but just not sure.

[@untamablewolf]

Im just now reading a learning but I believe that the difference between a 60 and a 65 is just the weight rating for the car that that transmission came attached to. the 65 would be stronger since it came with heavier cars

[@MrBeenDidThat13]

This foo said ebay 😂😂😂

[@Tgottarun]

Do I need a terminator if the engine is brand new?

[@Drefrmda404]

Can you LS swap a 2012 Buick lacrosse?

[@Logan_McAllister]

Please go more in depth on panthers their under loved

[@polarpop5060]

How can I get more horsepower 5.3 in my 03 truck

[@mattymatt669]

Can we get a VQ37VHR VS VR38DETT comparison

[@keithwilson8624]

Honest question, is there a aluminum 4.8 block? Just curious as if they exist

[@duolingobird1521]

500 is all u need to cop a 5.3

[@TerrickHarden]

facts.. Get one from a junkyard for like $350.. You definitely dont have to spend over $5,000 to do a swap.

[@carlinaousarmstrong8520]

I got a 86ss monte carlo,i put a lt in it , what can i do to boost the power

[@mountainchild9322]

BRO, CAN A COP CHARGER BE REBUILT TO BE A MONSTER ? JUST ASKING

[@Texasmule]

If anyone is selling an old big block chevy or 455olds that they no longer want and your close to dallas hmu because this 307 aint gonma cut it on my parisienne

[@sipdunkin]

I feel u guru but you don't have to go holley on everything, hp tuners is great app also🤷‍♂️

[@antoniononame3037]

U sound like a Hp tuner guy

[@sipdunkin]

@antoniononame3037 it's not that, now holley make great fuel rails but I wouldn't buy all their products

[@Stvn3200]

Which LS would u suggest for a 300zx? I found a Z for the low but I have to swap it. For a budget of $3500, which LS would you buy?

[@Rxdomo]

Better off buying the whole car wrecked or bad tranny

[@TerrickHarden]

Yup.. I bought a donor tahoe for $500.. Yes i said $500.. The only thing it was missing was the 4x4 4l60e but I had no use for it anyway..

[@MsMichael200]

Have you ever done an LS swap or are you just a keyboard warrior?

[@FranksShitBoxCollection]

Going by what he recommends its pretty easy to figure that one out 😂😂