A CONTRACTOR TELLS ALL! - EPOXY FLOORS FOR BEGINNERS

[@mrjustdiy3595]

I love how you let them actually get the feel for it and just step in for a demonstration most people will take over more than just let them work through the phases ! . They did awesome !

[@jerrybrandenburg5030]

the music itratating

[@FLIguy317]

Love the way you broke down the steps simple and easy …. At the same time splitting up the work load …. That’s very important on any job site.

[@mirwill]

Let’s gooooo! Going to give this a shot with my own company as our first flooring 1st project this Sunday! 🙏🏾🤞🏾 wish us luck!

[@LeggariProducts]

So exciting! We hope your project went so well!🔥

[@alexanderpaints9025]

How’d it go bro? What’s your IG

[@albertopatino2409]

Looking to ad this to my services also

[@itlifestyle8574]

How did it go

[@B-skidz]

We all want to know how it went

[@RobertMeck]

Finshed up my first expoxy floor today. Couldn't be happier with it.

[@mule666]

You have hart for you're work I can tell you love it.. Good to see.. I am from netherlands and also work in flooring.. We mainly are doing flake floors... And what you are doing is top notch

[@bravodetector4042]

Great Video, and thank you for the explanation. 1- What's the life expectancy in a normal house- few kids? 2- What type of tool do you use to clean? Special mop?

[@zKumaX12]

LETS GO! I got a huge opportunity to work in this field and possibly grow more. I start tomorrow and watching these videos is giving me motivation to know that i can do it!

[@LeggariProducts]

You CAN do it! It's a great industry to be in and if you ever want to grow your skill set, check out LeggariAcademy.com!

[@morganbaker3808]

This dude is a good teacher - calm and helps you feel confident while you're doing the action. Rare in this kind of work. My question is did you guys sand this or did you not have to bc you did the epoxy layer first? Or is this a new construction and you didn't feel like you needed to?

[@johnjoe7278]

more than likely used a grinder on the floor before anything

[@LeggariProducts]

The floor was shot blasted to make it really porous, then we did a thin coat of epoxy to seal the poors and minimize outgassing. This layer also creates an extremely strong bong with the concrete so it'll last a LONG time. From there the decorative coat can be installed. ALWAYS prep the surface to ensure a strong bond between the substrate and coating products💯

[@LeggariProducts]

Yessir! Always prep the substrate🔥 Our favorite prepping tool is a shot blaster to establish a porous surface and create a strong bond.

[@GINASUMMERS1]

LET'S GO!!!!! I want to do this so badly but since I'm a lady it might be very difficult to break out on the scene 😕... I told my hubby I wanted to do this & he said that I can be the "mixer" 😆... I'm the one that showed him!

[@LeggariProducts]

You can do it, thanks for watching!

[@GINASUMMERS1]

@@LeggariProducts OH I WILL 😆 DETERMINED!!!

[@fionanaidu9288]

Do it!

[@frankpowell3310]

I've used commercial grade epoxy for a company based out of baton rouge Louisiana, man power an skill an knowing product timing is essential. I enjoyed doing all the raising canes restaurants in Louisiana all the way to Huston and even residential floors and car ports, garages. From flake to pearl I miss the trade!!

[@waseemahmed2028]

A great video as usual. I have a suggestion to make if you can mention the time and the date on the corner of the screen then the audience would be able to understand and learn at which time you started laying primer, what time you put the first layer of epoxy and after how much time you added the highlights etc. The audience will understand more effectively if they can know the time required for one coat to dry out and the number of days needed to do a garage of a certain area. Please also accept my gratitude for making such informative and amazing videos.

[@LeggariProducts]

Thank you for watching and for your feedback! We send in-depth installation videos to anyone who purchases our kit which really helps each installer have a successful project🔥

[@okemc]

I am an epoxy contractor in South Korea and I know you would enjoy this job.

[@adriancapilna3899]

A great teacher+1st quality materials= GREAT JOB. Every second of your videos is pure gold for me. Thanks for all your effort to share with us your knowledge.

[@LeggariProducts]

You're very welcome!

[@kristyljohnson5622]

Ii8iikiik I iuuiiuuk my ku

[@kristyljohnson5622]

@@LeggariProductsk kllklll

[@sbstaysharp25]

Well said

[@seandieger3317]

Let's go. I did epoxy coat in my garage 15yrs ago. Needs a little help now. Maybe in spring I will fix it. It's January now.

[@LeggariProducts]

Thats awesome, yes, reach out to us if you have any questions!

[@dennishowland7495]

He did a fantastic job on that floor and I think the way you talk taught them how to put that product down. It’s a great process fresh product. Learn the system now you can take that system anywhere you going to make a boatload of money in that flooring system, I can’t wait to do it myself.

[@LeggariProducts]

Thank you so much, you are so right! There is so much opportunity in this industry and once you know the systems, you can do nearly anything🙌 Our comprehensive online academy, leggariacademy.com/ really helps people get started on their path to success in the coatings industry. We love being able to help hard working entrepreneurs get a start on their own businesses🔥

[@danielpailen5089]

LET'S GOOOOOO I WAS TRYNA GET I. THE CLASS BEFORE COVID I WAS GONNA TAKE THE FLIGHT FROM MD. EXCELLENT WORK BEEN FOLLOWING FOR ALMOST 3 YEARS

[@Ibeentravelling]

Starting a company to do this. got my first project starting today. Thanks for the help!

[@jeseniazuniga9781]

update us! how is it going?

[@greystonerider]

When you put the 1st sealer coat for outgrowing why did you not score the floor again before pouring the basecoat? Also do you need respirators when applying?

[@hdsracing]

LETS GO!!!!!!!!! I have experience usoing epoxy on custom cups and would love to take it to the next step!

[@resipsaloquitur1775]

LET'S GO!!! I'd love to set up an installation company. But tell me, is the actual doing of it as a business even half as fun / satisfying as watching the videos?

[@khud3172]

Let’s Go!Doing by myself on a smaller project in basement this Saturday 👀🗣Let’s go!🙏🏽💪🏽💪🏽💪🏽

[@19jody72]

I've been a flooring installer for 30 years now, thought about getting into this side of it. What's the labore rate on this? Per sqft? How bad is the odor? How long does it take to fully cure? Last but not least... how durable is it? If you jack a car up with a jack or sit it on jack stands, will it sink into the epoxy? By the way, just subbed! "LETS GO"

[@LeggariProducts]

Call customer service at 844-LEGGARI or Email [e-mail] They will be able to help you with your questions! Leggari Online Academy will be available soon. It will be the most in-depth, real-life application training course, in epoxy and concrete overlay available known to man! Once completed you will be a certified leggari installer! Sign up now using this link! leggariacademy.com

[@proxbimcginley5085]

On that one I’d charge $6.50 tops in Tampa Bay. Have to read client on how much they are willing to pay. Low voc on that one. Polyaspartic is where you get the fumes.

[@19jody72]

@@proxbimcginley5085 appreciate it man

[@TheRaptureIsComingSoon]

@@proxbimcginley5085 you mean per sq foot?

[@proxbimcginley5085]

@@TheRaptureIsComingSoon yes per square foot. So a 400 square foot garage would be about $2600

[@Mississippidawg]

Definitely can do this. I’ve had experience in epoxy on smaller projects and this will be easy. Finding help is the problem 😊

[@davidhjort7771]

I feel you on that

[@mrmiyagi4623]

go to ur nearest home depot

[@ashtonmcswain9350]

Let’s work

[@adrianchavez5940]

Hello, just curious why you went with polyurethane instead of polyaspartic for this project? I see a lot of companies use Polyaspartic for flake coatings. Is a polyurethane coating better for metallic epoxy?

[@RobertMeck]

Finshed up my first expoxy floor today. Couldn't be happier with it. 0:58

[@sexymonkey4979]

I wanna see do you have a gram?

[@stuartccrook]

Awesome tutorial - thank you! Could you elaborate more on the spraying with alcohol?

[@joerymom6640]

I want to learn everything about this product, mixing and applying appoxy will be a dream come.

[@dmatsuoka6973]

This is an amazing process we are thinking of getting into this business, I think there is plenty of demand where we live!

[@tyhust4081]

Let’s go. I just took a fulfillment partner position with a concrete coatings company. Already invested in a trailer and 4K of tools.

[@verlaat5]

Do you reuse the buckets with the remains of the previous batch or do you use a new bucket for each new batch?

[@sexymonkey4979]

I would use a bag, its messy cleaning them it becomes easier to toss rather than spend 10minutes and a bunch of rags and acetone trying to clean buckets

[@Prestigemuscle]

Great video! What if you don't add the final dull portion to the flooring and just leave it shiny looking?

[@LeggariProducts]

We recommend adding a topcoat for durability and depending on how it is applied, the topcoat can take away some of the shine. Find topcoats @ Leggari.com.

[@juliopedro4773]

after applying the thin coat of the epoxy to seal up the flooring, should you wait until it hardens or dry-up before applying the base color?

[@itsme_allanp9957]

Let's go! I recently moved into a rancher with a slab foundation. The laminate wood floors are looking a bit rough, and I'm seriously considering doing epoxy floors.

[@LeggariProducts]

How exciting! For reference, here is an epoxy flooring project we did over wood subfloor! kzbin.info/www/bejne/p4C7oqahaa12mrs You can check out our metallic epox yflooring options here. leggari.com/order-flooring/#metallic-epoxy-kits Best of luck to you!

[@martintaylor6459]

Like the content and finish guys just want to know do you have to machine sand the floors first, or can you just acid wash on bare concrete? Also how hard wearing is it ie car tires etc

[@jadebaeey4626]

With a white floor , I would apply what type of primer before the self leveling first coat you did ?

[@kyledyson551]

I bought and installed the leggari garage floor kit about 4 years ago and I have a 2'x2' spot starting to bubble and chip. Any advice on how to fix this one spot without having to redo the entire garage? Product turned out great and get a lot of complements. Just need to repair this eye sore

[@taurus-realty]

Thanks for this video! We’re applying clear epoxy to exposed aggregate, ground concrete. It’s going to look fantastic 🎉

[@jakejake7162]

I just got 3 H&C shield Crete kits, gallon of clear coat and a bag of flakes for free from my neighbor. Spent the past few days scrubbing the floor to just realize I’m gunna have to grind it after all(last owner put peel n stick carpet out there so no oil stain ever got cleaned up for many decades)😂 should I use something like behr concrete primer before applying the epoxy floor? My slab is in a floodplain so it always has some humidity, I read in multiple articles that it works well for paint(my original plan before I got all the free epoxy stuff) I’m curious if I should still use the primer or if I should just return it with the other paint supplies. Also it’ll be in a garage that’s going to get wet in the winter, will it be slippery?

[@cathywhite6885]

Looks great. Excellent tutorial. So can you do this inside on a basement floor and what are the attachments on their sneakers, how do the spies not track product? Love this concept ❤️

[@LeggariProducts]

Yes you can! Leggari spiked shoes allow you to walk on the wet epoxy without messing up the design! Check them out leggari.com today!

[@jk-vs3yq]

the spikes have a point to them that always walking above the epoxy it works well but can b slippery when walking leggari has alot videos on what types of prep primer to use and the process for grinding or etching concrete and sanding epoxy before top coat !!!cheers !!!

[@johnjones9017]

Let's go.. yes I am going to add an extra DIY to my business. I've got a lot in mind for this. Thanks for sharing.

[@LeggariProducts]

Thanks for watching and best of luck to you!

[@cristianseibriger799]

Great job you are doing there, and also your way of showing us how to do it is very good. Keep up the good work .I'm living in Romania. I plan to start a business with expoxy flooring. Can you please recommend me some products, where to buy, hot to find the right tools and mixing amounts? Thank you

[@reginaholmes4506]

So would you recommend for a wood floor to use black primer or go over with the epoxy resin the floor would be a gray marble with a splash of white and blue

[@LeggariProducts]

You might want to use this video as reference if you're considering coating over a wood floor. kzbin.info/www/bejne/p4C7oqahaa12mrs We always recommend people install their primer/Prep Replacement Primer/Flood coat in a color that is closest to their decorative coat. Explore all of our epoxy flooring kit options and other product here! leggari.com/order-flooring/

[@BhobsonKatie]

Let’s Go! Also, what was the denatured alcohol sprayed on after the highlights? Why was that necessary? Please explain.

[@LeggariProducts]

The first thing we spray is 91% or higher isopropyl alcohol; this creates cells in the design and disperses the epoxy. Once that evaporates, we mist denatured alcohol to pop micro bubbles. This allows us to avoid torching the epoxy.

[@parkertycksen3938]

LETS GO! Your videos are awesome and give me hope I can do this myself. Do I have to use a concrete grinder or can I use acid? Also, I know you use a big water scrubbing machine to clean after grinding. Does a water pressure washer do the trick?

[@brandonavellano1836]

I reallly really want to spend 2 months working with you guys on projects! free labour and pay for the course!

[@rockbottom7044]

Can I just do that initial coat of epoxy? I just want my floor to shine. How long would that coat last? Thanks

[@marklevenson]

where do you get the spikes I am doing this on my basement floor of my investment property I have worked with epoxy before easy to do and lasts forever and looks great

[@TheNinaBlancoshow]

I just received my kit I’m goin to be doin my bedroom super excited to see the finished product

[@edbertgrant701]

Which brand products did you got?

[@lancegrov50]

Let's Go! I would like to offer this as a service with my company. But have to experiment with it and get a feel for it.

[@maimaymarinzjabines3091]

Let's go! What chemicals we use to clean the tools after using sir?

[@LeggariProducts]

Denatured alcohol and a rag! That'll clean them right up

[@clarksonjones6474]

What would you recommend for an outdoor forklift pad that is heavily spalled from ice melt ?

[@LeggariProducts]

Definitely this🔥👉 leggari.com/product/concrete-repair-kit/ ✅ Resistant to ice melt ✅ Industrial Grade & High Strength ✅ Designed to handle years of heavy traffic ✅MUCH less than the cost of ripping out and re-pouring

[@makatkplt]

How do you clean the tools and with what? Say I had two jobs in a day; maybe best to have two sets of everything or is clean up fast. Also prepping the floor from motor oil spots to cracks? You have anything out there?

[@rickyrodriguez4181]

If you're laying it down on cractile, will it make all the tile pieces stick together and B as one. Without falling apart

[@meownezz]

I was wondering if such a floor finish be applicable for an upper floor, made from steel joists and MGO floors (sealed so nothing would leak)

[@mike_lives]

Is epoxy permanent? Can it ever be tore back up to the natural cement if someone didn't want it, or is the only option to do another layer and possible design or cement color over the old epoxy. Also can it be textured for no slip?

[@LeggariProducts]

It can be removed but it is easiest to re-coat over it. Our topcoat has a "grit additive" option that really enhances grip > leggari.com/product/wb-urethane-floor/

[@elmagico6994]

Let's GO!! 400 Sq. foot garage floor. It has a taper to it for water drainage so that's something I have questions about...a slight taper, which a high percentage of garage floors will have...just don't want my product to run out and down the driveway...lol.

[@LeggariProducts]

Yes most garage floors do have a taper! If it's minimal, you'll just want to keep and eye on things but typically it isn't that much of a concern. You can also install the epoxy after letting it sit in the bucket for a little while-it wouldn't be as fluid but you would have to spread it on the floor more quickly. A great solution for this is our flake floor kits-they are seamless, very easy to install, and hide any imperfections beautifully😍👉 leggari.com/order-flooring/#flake-floor-kits

[@elmagico6994]

@@LeggariProducts ...they also cut grooves/channels in the floor for water drainage. Obviously I need to fill(?) in those channels and fix any imperfe tions(cracks, damage to the concrete floor) before anything else. I appreciate your time and knowledge on pointing me in the right direction. The prep work will mean everything with this project I do believe.

[@beesiler3332]

What are some steps to do a basement with a semi rough floor will you need to be sure the surface is smooth or no ?

[@ЕгорКузнецов-в3ъ]

Good afternoon. Tell me, is it necessary to pass the primer before applying the resin?

[@joeburke8867]

LETS goooooo!! starting my own epoxy business in a few months!!!

[@walterfields3467]

Good work but why the matte coat at the end? I feel like it took all the gloss away but maybe it looks different in person?

[@pharmdiesel]

I think I am going to give this a go in my basement workshop. Do you think I can do it alone?

[@rhiannonkahoano2919]

I have two questions. Did you say 45 square-foot per gallon so if I'm doing a job over 500 ft.² I need about 12 gallons of epoxy? Also, is it mandatory to sand down my concrete garage floor first or is seal it with a layer of epoxy sufficient?

[@LeggariProducts]

hello! Coverage per a square foot depends on what kind of application you'll be doing. If you input your project square footage here, the amount of epoxy and other products you need will automatically be calculated! leggari.com/order-flooring/#hardwood-overlay-kits For floors, you really want to make sure the substrate is prepped well. We highly recommend shotblasting the existing surface to ensure that it is porous and a strong bond is established between the floor and product. And yes, we also highly recommend applying a scratched tight seal coat of epoxy before the decorative coat in case of outgassing. If you order a kit from us, we'll send you an instruction video and you can have assistance from our experienced customer service. support.leggari.com/hc/en-us/requests/newGood luck!

[@imranarhomar]

Loool u used all that metallic epoxy and then dulled it all out dang ... Loved the whole process just about to do my garage

[@AIMFC-y7r]

Great Video!!! Very informative. We polish concrete working into doing more epoxy.

[@XDemonology444]

Lets Gooo start next week doing apoxy flooring with my cousin just lookin for tips and tricks to look better while doing it

[@LeggariProducts]

So exciting! How'd the project go?

[@MilkerOnly]

I have a 250sq ft basement room I want to epoxy, I removed all the tile and started to remove the left over thinset. I got about a quarter removed, was wondering do I need to remove everybit of thinset down to bare concrete or is okay to knock just the high spots down and leave the rest with standard grooves. Will the epoxy fill in the gaps? Or should I use a self leveling concrete on the whole floor first or continue to chisel/grind the thinset down? (So much dust)

[@Rainman270]

Why do you spray denatured alcohol on this coat ? Do you spray it on the entire floor ? Should this floor be rolled toward the end and if so, rolled before or after spraying it with denatured alcohol ? Thanks.

[@muhammadtariqmehmoodkhan9706]

I'm already loving it but I wonder if it's more costly than marble or not? Please reply people

[@dalejones4951]

Let’s go. I’d love to do this on the first floor of my house. I’m sure I could do it but I’m not sure I have the man power to do it right.

[@LeggariProducts]

How many people you need really depends on the size of your project. Often times, a two man crew is adequate. Feel free to contact our customer service for assistance or questions on our products. 👇 1-844-LEGGARI (534-4274) [e-mail]

[@green6185]

Looks nice and It seems a easy work but the floor may be slippery, espically when it is wet.

[@remix52099]

hi mate thx video so good , but i have some question , if customs wanna glossy not like Matte , what is use for top coat? thx so much

[@smartmero]

May I ask if you can advise with raw materials and tools supply?

[@KGriffin34]

Do you Have a video on doing this over ceramic tile? I want to do it in my basement

[@jourdanmercer5935]

Let's go!!! Thank you for going through the process. So excited to do my first epoxy floor!

[@JorgeSilva-nj9hi]

Let's go

[@carlamcclellamd7839]

Respirator always!!!

[@reginaholmes4506]

And second question is what kind of primer would you use is it a certain primer or an epoxy resin primer

[@LeggariProducts]

Definitely a primer specific to the product you'll be installing over. Our Primer and Epoxy bond extremely well, creating a lasting surface✨leggari.com/product/wb-primer/

[@stanbaite466]

Do we need a particular shoes for this? How many hours/days it took to dry?

[@Chino831]

After watching this video I know what my side hustle is gonna be now I just need more details on prepping anymore content on prepping

[@sexymonkey4979]

Have you started and wyf?

[@NicoTheRipper]

What's the difference between rolling epoxy or pouring it and spreading it with a squeqee like in this vid? I saw these two ways now, and was wondering.

[@jenari818]

This is an AMAZING video. I’m pullin’ the trigger and doing this for our shop. I am hoping you have full kits on your website down to the cleats!

[@LeggariProducts]

View our kits and Leggari spike shoes here! 👉 leggari.com/product/epoxy-floor-kit-1/ leggari.com/product/spike-shoes/

[@guykanhye4516]

Can this be use on an outside wooden deck in a cold climate environment ? thanks

[@ishmielhardrick9483]

Thanks so much you are the man 💯

[@LeoThaLion23]

Question, me and my wife want matte finish epoxy floors in our new house. We currently have stained concrete. Ive noticed in some lighting you can see where our dogs have scratched across the floor and some areas are faded. Do epoxy floors hold up well with animals and fading?

[@elizabethzertuche4125]

Let's go I'm a resin artist and I'm excited to do my floors

[@GlassfilmWeddings]

did they forget to do the edges of base before putting highlights? Do we HAVE to do a primer on? being that first coat after prep/grinding.

[@josemadrid9656]

what did you use to fix cracks, holes?

[@jantjiesdesiree5356]

Awsome tutorials i am in South Africa could you kindly let me know i want todo expoxy, the squeezy to use is it rubber or metal? The alcohol used Denatured can it be any alcohol with at least 99%,

[@LeggariProducts]

Leggari Online Academy will be available soon. It will be the most in-depth, real-life application training course, in epoxy and concrete overlay available known to man! Once completed you will be a certified leggari installer! Sign up now using this link! leggariacademy.com The dispersing effect is achieved by spraying small to medium drops of 91% isopropyl alcohol, then finish with a fine mist of denatured alcohol (fuel) to pop any bubbles and allows the epoxy to lay out glass smooth! The squeegee is rubber and you can get them at leggari.com

[@broncogil64]

Great job guy's. Can i do like neon color's in a two care garage.

[@xandrarod2004]

Do you give private classes? Im a beginner. I 've seen so many videos but im a little confuse. I need to start my own company.

[@venicechris]

Great video! You're the boss I wish I had

[@rict.4938]

This looks amazing and I want my basement done in red and gold

[@MaitlandDarragh]

What type of epoxy would you use for a food processing plant? The floor is constantly wet and takes abuse. Its a concrete floor.

[@LeggariProducts]

Our Flake floor kits are a very durable and lasting option-they hid any damage really well and are easy to install. Find them here! leggari.com/order-flooring/#flake-floor-kits This system is a little more complex but same thing-very durable and versatile: leggari.com/order-flooring/#hardwood-overlay-kits

[@MaitlandDarragh]

@LeggariProducts I had heard that " kits" do not work so well. I am looking for something for a base over the concrete then a top coat.

[@valeriesinsuranceagency]

Let’s go! I’m ready to do it!! Do I need those shoes?

[@LeggariProducts]

They most definitely help! You'll want to be sure the spikes are sharp and to walk carefully but they will allow you to walk on the project and fix any problem areas. Check them out here! 👉 leggari.com/store/#accessories

[@NivalChavez]

Great video and products, you really take the time to explain the process I’ve seen a few of your videos recently, they’re very informative how can I go about leaning more is there a class or some like that. Thanks

[@hanumamaofficial]

How sturdy is the epoxy flooor then? Considering it's an acrylate does it scratch easily?.

[@edbertgrant701]

What brand products do you use?

[@OmarLopez-ll8xd]

looks very good 👍🏼, where I can buy all the products for my living room, it's small area just 285 sf

[@LeggariProducts]

Thank you! Check out our Epoxy Floor Kits here! leggari.com/order-flooring/#metallic-epoxy-kits

[@kevinspeicher7080]

At what point do you take the tape off the walls? Wont epoxy stick to it?

[@waynesimpson3501]

What about an outdoor patio that is prone for sun and rain?

[@LeggariProducts]

THIS 🙌 👉kzbin.info/www/bejne/jHqom3uOh7Wtl5o or This! 👉 kzbin.info/www/bejne/qZC9qqOJlKiIZrM

[@quinncoleman2558]

How would you recommend starting with this process. (Everything prior to this video) as in what materials do you use, what’s the mixing process, how do you prep the floor/areas, etc

[@lesjuanrobinson9746]

Let’s go !! Man I just showed my wife this video and we’re definitely game for knocking this out.