Рет қаралды 3,048
I will have better use of the 3" drive than in this 6128.
Join the community on Discord: / discord
My Tipeee: fr.tipeee.com/rodrik-studio/
00:00 Introduction and health
01:19 Inventory and dismantling
03:48 Modification of reader socket
07:24 Gotek configuration and power supply
09:26 First test and 3D
11:13 Complete assembly
18:46 Installation in the CPC and testing
22:11 My 5"1/4 reader
26:48 Super Cauldron (Titus 1992)
29:30 What I'm going to do with my 3" drive
Description :
=============
Without the 12V cable for this CPC 6128, I looked into making one but finding twisted gray wire is not easy.
In addition, I use the 3" drive less and less. The drives are often misaligned, the floppy disks are very bad and the Gotek is so much more practical.
So I decided to build an internal Gotek. But what we find on the internet is ugly, with small screens when we have plenty of space, so I designed my own.
You will also be able to see my 5.25" drive made a good 10 years ago and which still works perfectly. Much more relevant than a 3.5" drive and also because I still have a large stock of new 5.25" 360kb floppy disks.
Good viewing.