A Great Pedal that got mess up by Quality Control

A Great Pedal that got mess up by Quality Control - Cammus CP5 Review In depth

Рет қаралды 2,007

Күн бұрын

I will walk you through every detail of CP5 Pedal the Entry Level Pedal from Cammus. That can be use standalone with any steering wheel
Everyone (Even Cammus themselves) will tell you it is the worse Pedal but I will prove them wrong. And show you how to make it great pedal. Like I did on LC100
I hope with this video I earn your Like & subscription
This review cover these topic
Why it is so Cheap
Problems
Fix
Software

Пікірлер: 26

@phillhatton4492 9 ай бұрын

The grub screws that hold the sensor in place tend to loosen over time. I'd suggest getting it right then applying some locktight to the grub to keep it secure!

@teamothy 24 күн бұрын

ขอบคุณมากครับ ทำคลิปภาษาอังกฤษ อย่างน้อยผู้ผลิตเค้าเข้ามาดูแล้วเข้าใจว่าพวกเราต้องการอะไรแน่นอน

@EctorPlays 6 ай бұрын

Great video man!!

@Batmeow505 8 ай бұрын

พี่ได้เล่าเรื่อง f1 เหมือน nico กับ lewis อีกมั้ยครับ มีช่องทางไหนมั้ย ผมอยากดูอีกเล่าสนุกมากๆครับ❤

@BoreyEngineering 8 ай бұрын

เดี๋ยวจะทำออกมาเพิ่มคับ แค่คลิปแนวนั้นตอนทำมันกินเวลาชีวิตมาก ช่วงแรกที่ลงไปคนดูแค่ 400 เองเลยเลิกทำไปแล้วคับ ถ้ามีคนสนใจจะเริ่มทำใหม่คับ

@vasilisvav 3 ай бұрын

what should i do if the usb cable with the usb port dont have good connection. I have to lift the cable in order to get connection. Is it fixable?

@BoreyEngineering 3 ай бұрын

you can try and make sure that your cable have grounding perfectly, or you can connect it directly to PC

@vasilisvav 3 ай бұрын

@@BoreyEngineering the problem is in the pedals. The female port of the usb c probably does not make good contact with the board in the pedals.

@rocupacu 7 ай бұрын

thanks so much, it fix one of my problem i hope you can tell me whats wrong with my another problem when i first bought it the brake pedal had slighty harder resistance than the throttle, but now my brake pedal is softer than the throttle, any thought for that?

@BoreyEngineering 7 ай бұрын

maybe check if there is any rubber inside brake spring. The rubber can be worn down and stop provided resistance. You can use something else to as a replacement

@rocupacu 7 ай бұрын

@@BoreyEngineering now it make so much more sense, i always thought the resistance come from the spring alone. thanks so much!

@sebastiangomezbattista6260 9 ай бұрын

Hi! What software version are you using? I don’t have those curve editors on mine

@BoreyEngineering 9 ай бұрын

I'm on 1.6.0 PC And you also need to update firmware on CP5 as well. And you need to connect it through USB only

@sebastiangomezbattista6260 9 ай бұрын

@@BoreyEngineering ok. So to update the CP5 pedals they should go straight to the PC and not through the wheel right? I’ve had issues when trying to update the pedals’ firmware when connected to the base (i have 1 CP5 that is not working atm)

@BoreyEngineering 9 ай бұрын

@@sebastiangomezbattista6260 I'm not sure but I did firmware directly connect to PC. If you connect to PC you need to use USB-C to A adapter. USB-C Direct to PC will not work

@sebastiangomezbattista6260 9 ай бұрын

@@BoreyEngineering perfect, thanks!!

@sebastiangomezbattista6260 9 ай бұрын

@@BoreyEngineering can I use any USB C to USB A adapter or does CAMMUS sell one?