A look at a Yaesu FT-991A - Not a review

[@Wavelength7mhz1]

I already own the FTDX 1200, FTDX 10, I now have a FT 991A and I'm amazed at the quality of rx tx audio ! The receive filtering is excellent 👍! Beyond satisfied ! 3 band parametric EQ is icing on the cake

[@jeffreyreid1729]

I have the Yaesu FT DX 3000 as the main radio...Got the FT 891 during the lockdown for portable as well as digital use and recently purchased the FT 991A again for portable use with the RV to have the "Shack in a Box" capability. Coupled with the ATAS 120A antenna my first contact with that antenna was across the US from the Gold Country of the Sierra Nevada to Pennslyvania on 17m. I was impressed and very happy indeed!

[@patrickslevin6424]

Glad you've found one......I've had one on order for 6 weeks and have yet to see it. Now, they're talking about a June shipment date but I'm not counting on it. If car companies can't get chips to sell cars what chance do I have on a radio?

[@jay-rus4437]

Really like this rig, and have had it for about 6 months, but the new ftdx10 looks amazing. The improvements to the menus, display etc have come a long way. Yes its more, but for the additional $600 it looks like it may be worth it. My 991 is always in the F list. Ive set the bottom four with 1. Meter 2. PWR 3. NB 4. MCH, then put the remaining options to the page with the DNR DNF etc. This setup gives me immediate access to the most used functions all the time.

[@mike-M0MSN]

Yep, I’ve done pretty much the same 👍👍

[@paulhastings3109]

tnxs Mike going to receive my tomorrow KQ4CD Paul

[@ben2e0omr]

I have been considering an FT991A for some time and this video has convinced me to save up for one. Thank you Mike.

[@ronknight3417]

mike i have found that the with a wider band width the dnr is less vicious much better in my opinion (Ron)

[@patrickmclain2113]

Hey mike, ya might try recording with a little more volume fir those of us using our mobile phones. Thanks.

[@WTx1971]

Thanks for the look at the 991A! I have one and like it very much!!

[@jamesgeorge1709]

My favorite radio is my old Yaesu ft 450 for me it is just about perfect. One thing I really like is the ability to change the display colors and the built in tuner, both the later versions were not able to do these. I have quite a few rigs kenwoods, Icom, drakes but it's my favorite. The 991 might be next.73

[@pa6552]

Just got mine - really find it a bit of a challenge to get used to how the radio "remembers" things. Biggest things I've now "forced" into my memory is this: 1. The multi-knob will remain doing the last thing you selected and used it for (except for scrolling through menu options - it never forgets or overrides that function) - so, if you come into the main menu from start-up, go into memory mode, use the multi-knob to switch through channels, then change the SQL with the knob, you cannot change channels with the knob until you go back into the Function menu, search for the "MCH" button and press it... 2. I thought my waterfall was "broken" - if you press the "Sweep" button, it will stop the waterfall - you will have to press it again - even if you power cycle. 3. To get settings etc sorted in order to save to memory, make sure you are in VFO mode and not Memory mode...

[@J1mbo888]

Cheers Mike. Have had mine for 6 months now and still learned something new from your video :-)

[@2j4ez]

Nice radio. I used to have a fusion repeater near me about 3 miles away but it was taken down. if I want to do fusion then I have to use a raspberry pi. ive have a ft70de and a 2de yaesu radios. Can you touch the water full display to change to a active signal?

[@mike-M0MSN]

Can you touch the water full display to change to a active signal? unfortunately Not....

[@lastchance3552]

Great video, and very beneficial (to us) use of your lockdown time. I'm looking for my first HF radio and you were very helpful. Thx

[@mike-M0MSN]

Glad I could help

[@Briian2K]

You can access PMR and transmit if you go in the "Service Mode" :)

[@mike-M0MSN]

Thanks 👍

[@schoenerrobert]

and how I get the "Service Mode"?

[@PrimulaCarniolica]

YES Mike,you had & are right! FT-991 it si a nice, practical moble rig!!!I just bought recently and using for mobile & portable!👍👌

[@greyhound0z]

Hi I've just bought the radio, I'm new and have no licence so just listening..but when on uk cb I can hear but I can't key up? I'm lost

[@stevenbirch]

Nice informal look at this rig, thanks. I have been thinking of buying one so the "hands on" is helpful. Am I right in thinking that it has a plastic (resistive) touch screen? That would seem a shame when (for example) all modern phone screens are glass with capacitive sensors, less likely to scratch when cleaning off the fingerprints.

[@mike-M0MSN]

Steven Birch yep plastic resistive it is, (I think) but look passed this and underneath is a superb rig.

[@haz99912]

Hi Mike. Could you please do a C4FM demo? I am buying one next week, just wanted to see how it works on the 991a and if possible could you also do a demo on CW? Cheers

[@mike-M0MSN]

I will try to do so soon.. :)

[@la7yka]

I have one. It's a great rig for full power all mode all bands.

[@karlmadsen3179]

Just got mine. Haven't powered it up yet. Nice video. I'll be looking for you in the air....KD9PNS. 73s

[@2travellersandadog95]

What type of antenna would you require please for this radio? M7OWA

[@PrimulaCarniolica]

One more great & informative look about hamradio world. TNX Mike!!!

[@ronaldreynolds9870]

Hello thanks for the video, I just purchased the ft-991a , I like the radio very much, tnx for the video very much, it was very helpful. N8DUK, Ron Columbus, Ohio 73

[@mike-M0MSN]

Glad it helped

[@alanjones3873]

Only had mine a few weeks and learning fast, some more pointers from this, disappointed on frontend weakness as I enjoy field days so thanks for warning.

[@JeremyAndrewsNow]

Very interesting, I've been debating between the FT-991A and Icom 7300. I'm leaning heavily towards the FT-991A, I have limited desk space and this would allow me to replace my HF and VHF/UHF rigs with a single box... 73 de VE3EBQ

[@mike-M0MSN]

It's a great radio

[@allanmacuser]

thank you for the radio info you have been a big help, I like the idea of having a shack in a box I am just a little concerned about if l would be able to get into a fusion repeater, mind you l do have d star also running a hotspot. this is all new to me as l have been off the for over 35 years wow what a change lol regards ALLAN G6tmo

[@aeron-mw7ofs]

Great stuff Mike , I'm looking at upgrading from an old 706mk2g pretty soon and it's been a toss up between the 7300 , 991a and even the ftdx10 . But for my needs the 991a fits the bill 👍👍

[@mike-M0MSN]

Go for it!

[@tesla238]

Hi thanks for your video

[@4428314]

Fabulous, you just convinced me to buy one. Greetings from New Orleans, 73, KG5OBD

[@mike-M0MSN]

Enjoy!

[@geraldscott4302]

I'm in the U.S. I've been considering replacing my Icom 718 and Yaesu Ft-2900R with the FT-991A for some time. It comes with all the HF bands, plus 6 meters, 2 meters, and 70CM, all in one radio. But all I keep hearing about it is how many problems it has. On one video, someone actually chose an Icom IC7300 over the FT-991A. Besides being a fancier radio, an IC7300 doesn't do anything my 718 doesn't do. I wanted all the bands in one radio. Looks like that is not going to happen, at least not just yet.

[@johnratcliffe6438]

Do you still have your lovely TS890S?

[@mike-M0MSN]

John Ratcliffe oh yes. Never part with that. 🥰

[@johnratcliffe6438]

@@mike-M0MSN Very nice! I still watch your unbox video often. I'm now M7JHA, sitting my Intermediate next month. I have a 9700, but no HF rig yet. I'm torn between a few options, but am dreaming big! I hope you're keeping well 😊

[@ronknight3417]

mike dont you think the nose reduction is a bit over the top even no 1, i much prefer my 7100 i have a 991 not " a " though

[@mike-M0MSN]

Yes it is a bit OTT, but it does work

[@Andy2e0ree]

Hi Mike I did not like the 991 I which yaesu would make a new 2m and 440 usb radio

[@mike-M0MSN]

Agreed

[@boxingday11]

Thanks Mike.

[@RolyRJ]

Another great and informative video Mike, cheers

[@mike-M0MSN]

Thanks Roly..

[@JosephAnthonyJosefius]

I’m in The U.S. and just set mine up, thanks for the info! Subscribed.

[@timg5tm941]

Great stuff Mike. Very informative indeed. 73

[@teashea1]

very well done- good content and production values

[@mike-M0MSN]

Much appreciated!

[@stephenpadley6684]

Mike, can you turn the RF POWER down to 10 watts for foundation level operating stn

[@mike-M0MSN]

Stephen Padley Yes, Variable from 5 to 100 W

[@stephenpadley6684]

@@mike-M0MSN Brilliant if I use a yagi with good db, I've got a pole right on the v of my apex a 3.5 mtrs above gutter height, should gain extra db, without going above 10watts.

[@BrianJ00]

Hi Mike, I have just got a 991A new, but something strange keeps happening. The waterfall freezes or does not come on at all, needing the radio to be reset. Any ideas?

[@mike-M0MSN]

Hi Brian, sorry to hear/read this, I would suggest a call to Yaesu on this one or a workshop like ML&S..

[@BrianJ00]

@@mike-M0MSN Thank you for the reply Mike, I did ring ML&S this morning, I did get it from them. They could not offer an explanation but have put a note on my account. If it keeps happening it will have to go back :( Many thanks Mike keep up the good work with you're videos. 73 Stay safe.

[@CaptainK007]

How did you determine the front end is too sensitive?

[@mike-M0MSN]

kzbin.info/www/bejne/pJiQpZJ3gMagfJY

[@CaptainK007]

hollyend01 thanks. Ah. Too tender. I have an ftdx5000 and run them pretty much next to each other antenna wise. I’ve got the 991 on a vertical and the 5000 on 5 band trap at 30 ft. Long wire, coat hangers etc. Ie all wire antennas. Been running in this configuration for about 3 months and touch wood, no problems

[@robl4554]

That’s really helpful, thank you so much. Been weighing up options for when funds permit and subject to selling some existing equipment later in the year. Thanks and 73 de MJ0RZD Rob

[@richylad]

Mine is the EU version and mine is widebanded and also will tx on 446mhz, 73 Richard

[@mike-M0MSN]

Any chance you can photo the jumper and send me them.. email on QRZ :)

[@robertallbright]

Thanks Mike keep up the good work 73 Rob G3RCE

[@Ei2iP]

Had the ft991, sold it, i know most radios are menu driven, but this was frustrating, best way to use this radio was using HRD or Win4yaesu. Had no interest in the C4FM stuff, so never tested it...

[@MikeM0XMX]

You and me both Robbie.

[@MrCrijns]

Nice

[@mike-M0MSN]

Thanks

[@MikeM0XMX]

Very interesting Mike. M0XMX. I have now subscribed.

[@mike-M0MSN]

Cheers Mike

[@nigelgriffin485]

Good one thanks m6ltv south cerney 73

[@mike-M0MSN]

Thanks Nigel.. :)

[@cliffcollins4124]

Hi there, I am finding yours, and others, efforts to show the FT991A to be totally infuriating. Not one of you, that I have found has shown us around the radio, I cannot find a shot of the back for the sockets, nobody tells us if it is a 230 or 12v, has it 2 antenna sockets or just 1? has it any connection to a computer ? All of you just show the front. Then you put the crazy shortcuts across the front of the picture, which blocks our vision and if you want to pause and look closely at something you are showing, the crazy shortcuts telling us we can jump ahead comes back and stays there. Hopeless is the only comment that comes to mind.

[@mike-M0MSN]

Well I guess you could always go to the Yaesu website and download the brochure!!!