A New ERA is Here!! Times Have Changed!! The Buy Once Fly Forever Frame?!

Introducing the toughest FPV camera cage ever. Crafted from a special nylon polymer blend, it absorbs impact energy to provide unparalleled protection for your FPV camera. This lightweight, durable cage outperforms traditional CNC aluminum designs, enhancing both robustness and flight performance.
▶️Where To Get Your Very Own:
✔️itsfpv.de/prod...
▶️Where To Get Your Very Own It's FPV Motors:
✔️itsfpv.de/coll...
▶️How To ExpressLRS:
✔️ • Finally! Quick Set Up ...
▶️ELRS Playlist:
✔️ • How To ExpressLRS - ELRS
▶️When You Set Up Put On EZLanding:
✔️ • ALL NEW!! Betaflight 4...
▶️Download & Install Betaflight 4.5 & 10.10:
✔️ • NEW!! Betaflight 4.5 &...
▶️$150 Full Drone Build:
✔️ • Build This Quality Fre...
▶️OG Infinity AIO Board Video:
✔️ • How Much Would You Spe...
▶️How To Fettec Alpha:
✔️ • How To Flash, Set Up, ...
▶️How To Fettec:
✔️ • Finally!! How To Wire,...
▶️How To ExpressLRS:
✔️ • Finally! Quick Set Up ...
▶️Pavo Pico:
✔️usa.banggood.c...
or
✔️www.myfpvstore...
▶️NewBeeDrone Products:
✔️newbeedrone.com?aff=58
▶️▶️Ultimate Motor $17.50:
✔️✔️www.myfpvstore...
▶️▶️DemiBot Build:
✔️✔️ • ALL Aluminum!! 😱 FPV F...
▶️▶️SpeedyBee Stack Video:
✔️✔️ • What If One Stack Coul...
▶️How To Bind ELRS Micro Drones:
✔️ • How To Bind Any & ALL ...
▶️The One & Only Moxy Build:
✔️ • Let's Build The All Ne...
▶️Let's Build A Master Drone:
✔️ • Let's Build a Master D...
▶️My Review of The Speedybee V3 Stack:
✔️ • All New SpeedyBee V3 S...
▶️Aikon F7 AIO 60 AMP:
✔️usa.banggood.c...
▶️Let's Build It Playlist by DrainMan:
✔️ • Let's Build It !!
▶️Everything To Know About LED's:
✔️ • Betaflight LED's !! Ev...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
▶️If you don't want to build one, Buy One!
✔️amzn.to/37s0SdE
▶️Whole Trouble Shooting Series:
✔️ • FPV Electronics Troubl...
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
✔️usa.banggood.c...
====▶️Camera For My Scope:
✔️amzn.to/3SA2ANg
====▶️LED For My Scope:
✔️amzn.to/3ZiVsXC
====▶️Lens For My Scope:
✔️amzn.to/3kxPQKs
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️Cheap One
✔️usa.banggood.c...
▶️Micro Pencil Soldering Tip
✔️amzn.to/3Fq1dKm
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️My Favorite Multimeter:
✔️amzn.to/3Y3QlJT
▶️Cheap One
✔️usa.banggood.c...
▶️Must Have Solder Mat:
✔️amzn.to/2FXQKuU
▶️No Cotton Foam Cleaning Swabs:
✔️amzn.to/3joxWUi
===▶️ / drainmanfpv
▶️MyFPV Slidez:
✔️www.myfpvstore...
▶️Blue Loctite:
✔️amzn.to/3fB0lqL
▶️When A Motor Rips Off:
✔️ • What Would You Do If T...
▶️How To Set Up LED's
✔️ • Betaflight LED's !! Ev...
▶️ES121 Electric Driver:
✔️ • ES121 Electric Screw D...
▶️If You Want The Beast by iFlight:
✔️amzn.to/354KxqW
✔️www.myfpvstore...
▶️iFlight Beast Review!
✔️ • Why Wouldn't You Use T...
▶️iFlight Beast Build & Flight Video!
✔️ • Let's Build The H7 Bea...
▶️Crossfire Nano SE:
✔️www.myfpvstore...
▶️Unify Pro 32 HV:
✔️www.myfpvstore...
▶️Caddx Air Unit for DJI
✔️www.myfpvstore...
▶️Custom DrainMan Motors!
✔️www.myfpvstore...
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore...
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️ • The Ultimate DIY Varia...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
/ drainmanfpv
/ drainmanfpv
▶️If you want to learn about LED's:
✔️ • Betaflight LED's !! Ev...
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2-Day Shipping)
✔️amzn.to/2PjqUDi
or
✔️www.myfpvstore...
▶️How To Taranis:
✔️ • How To Frsky Taranis
====▶️Contact Me: @DrainManFPV on FB or [e-mail]
====▶️I'Gizzle: / drainmanfpv
====▶️ / drainmanfpv
#ERA #fpv #drone

[@techFPV5964]

Drainman your the best dude.👍✈️

[@redbaronfpv8555]

I just built this frame with all new parts and it Flys amazing worth the money!!

[@Rcschim]

Thanks for that review! Now I want to build this! They also sent me one. Don't fly 5"often, but with this maybe I'm less scared to crash it? Looking forward to your build and test video, greets, Mario

[@Quadwrex]

I used a center tpu insert on my skelter5 v2. I have a screenshot of the blackbox on printables. It's not a gimmick. It actually helps dampen out the vibration.

[@savyfpv8048]

DrainMan makes my sunday every sunday he drops! blam!!!

[@dinosabic5383]

Gunna pick up 2 or 3 of these this weekend and start putting it through its paces. 💪 Great vid as always!

[@MattysDroneWorld]

I would live to see a 3.5, or a 3 inch version!

[@GarethDix]

That would be amazing... depending on how heavy it is!

[@ChomperFPV]

Definitely a frame built by pilots and it shows. Seems to be a great basher, can’t wait to see the fly review

[@MattysDroneWorld]

Damn, the future is here lol! This frame is sick...$110 for the 5 inch, is a little pricey, but if it proves to be as durable as they say, it'll save you a bunch of $ on the long run....Good review man!

[@xORLOCKx]

Got one on the way. Looking forward to seeing how it flies and lasts at the bando

[@3eggerfpv397]

It's definitely a cool frame with what seems groundbreaking new frame technology! The down side is you never know how long these new companies will last, so if you buy this frame I would by a dozen replacement arms sooner than later!

[@Vertolot]

You almost turned super sayan trying to crush it with your fingers 🤣. Looks like an apex looking from the rear, especially below. But seems like an awesome frame.

[@derfmuff]

I think it’s worth the money. A lot of people fly the Apex and I know itsKen was using the Apex. I think this is a lot better for a little more $ than the Apex Evo.

[@matt.explore]

Looks like a great frame. Reminds me of the Apex frame - Apex 2.0 haha

[@FlyZoneFpv]

Pretty cool Drain man I can’t wait to see the crash test 👊🏻

[@malnasimon7041]

I never thought I'd ever say this about a frame, but the 110$ price tag on this seems to be justified. I thought this was gonna be just another rando frame review, which is nothing special, but I was wrong. I mean, this is basically everything that I am looking for in a frame: 6mm arms, soft mount camera, split bottom plate, x geometry. Now, there are many other frames having all this at a lower price (even the tbs source one), but the extra touches and extra thought that have gone into this are crazy. Now I will surely not switch to it, as I do not have the budget. I'm currently running a clone apex from Aliexpress for 19 bucks and it seems ok and solid. But if I had to choose between this and a real Apex, I might actually go with Itsfpv one

[@kmieciu4ever]

Everything a German can make for $110, the Chinese can produce for $19 ;-)

[@YOUAREALIEN-xg3gf]

Hey guys, I have a Runcam Phoenix SE that comes with 6 cables. Starting from left I have red wire which I'm going to solder to the 5v on my speedybee v4, a black wire that I will solder to ground, yellow wire I'm soldering to cam. The 3 additional wires are blue, black then blue. I want to be able to access the camera osd through the flight controller. Does soldering any of the blue wire to cc on the flight controller enable camera control? Point of information this is my first time building a drone

[@malnasimon7041]

@@YOUAREALIEN-xg3gf First of all, thats a pretty big d*ckhead move to spam under comments. Second of all, those wires do not work as cc if wired to the fc. Just cut them off or depin the plug

[@kmieciu4ever]

@@YOUAREALIEN-xg3gf I have Runcam Phoenix 2 SE and the last blue wire is the camera control (the one in the middle is apparently for voltage sensing when not using a flight controler). When you flash betaflight remember to pick from other options "Cam. Control".

[@YOUAREALIEN-xg3gf]

@@kmieciu4ever thanks a million bro

[@Mambafpv]

I just dropped my review but some how you sold it to me again 😆 i have just been to a bando and tried to break it but its too strong

[@FREEDOMFPV84]

Nice frame I'll have to check it out I'm addicted to building new frames amd are the props in view of the 03 camera I was about to buy the superfly frame for 130 so this one is cheaper lol thanks man

[@yotwist_]

On syncmode/flipmode camera is at the same level as front motors or even a bit further forward than motors, and you still get some props on wide and of course a lot of props in view on ultrawide. Sooo, I believe with this frame you will have props in view all the time. I would go with supafly for o3, they are also a super durable bandobashers

[@winder6]

Build and test vid for sure cheers

[@ClareFPV]

Loved the shirt bro! And review was spot on! Please also review the Lumaquad 5 Freestyle frame. It is juicy AF with the 4.9" arms (210mm wheelbase 🤯) 🧃

[@Smagsfpv]

I can't wait for the build and bash video,I'm really curious to see how it holds up

[@proximityfpv1722]

what's the weight? Thx!!! I want it to be comparable to my modified reversb frames, can't find kiss v2 FC's so will probably build a new fleet soonish.... :(

[@hi_desert_rat]

Looks like a monster. 👾

[@carterdavis5176]

This is by far one of the most innovative frames I've seen come out within the last year

[@YOUAREALIEN-xg3gf]

Hey guys, I have a Runcam Phoenix SE that comes with 6 cables. Starting from left I have red wire which I'm going to solder to the 5v on my speedybee v4, a black wire that I will solder to ground, yellow wire I'm soldering to cam. The 3 additional wires are blue, black then blue. I want to be able to access the camera osd through the flight controller. Does soldering any of the blue wire to cc on the flight controller enable camera control? Point of information this is my first time building a drone

[@lynsmith1096]

Good review Drain Man

[@Fermen80]

Are there some cracks to see in the middle plate with the screw in te middle? Looks like its bend inwards with some cracks around the screw. @11:01

[@DRONEPOISON]

Appears to be right where the squishy foam plate goes in between

[@GarethDix]

Can't wait to see the impact testing... any chance you could weigh the frame by itself as I can't find any info on that? If I built one of these to survive a band... 100% I'd get this stuck in a tree or on a roof on the first pack

[@MerKFPV]

Love the design of this frame , when I saw it I must say I was very intrigued. Everything looks pretty awesome about the design , my only concern is action camera mounting. How strong is that single point on the print itself ? Also , what was the AUW on the frame and hardware brother ?

[@jasonchavis6414]

Do they have any tpu stl for the arms?

[@willcheyney]

What does the frame weigh?

[@frostbitefpv4855]

How heavy is it? Can't find a weight on their website?

[@lambo_drives]

If He Build it; He will Break it. nice; innovative

[@earflapjetpackfpv]

How👏much👏does👏it👏weigh?

[@EliteFpv]

Looks like an awesome frame. Only gripe is The GoPro mount is going to break and rip through the little tiny bit of tpu where the screw goes through 100%. Good luck finding that black print in a bando or woods. lol. Also I need to know if the props are in view when using an 03 air unit. Also I never did see a reply to the 8s video you made. I would like to know what electronics you had in that bad boy. ☮️

[@AzidChannelExplore]

good video, I want to have this plane but can't yet

[@tat2edtrash130]

So good

[@Fly_High_FPV]

Nylon vs Titanium camera cage? I'm going with Titanium, everytime.

[@Schoasch_phr]

does anybody know what the frame waights without elecronics?

[@MeBoazz]

The reason this gram so good is because it’s made my Ken

[@merlin_fpv]

Weight?

[@KevFPV]

DrainMan 👊🏼

[@_google_user_]

What is it's weight?

[@chd2323]

Just not worth the $$$ Flyfish Volador 5-6” is the shit really for durability.

[@cheechfpv]

Let me be clear this frame has one major flaw! The camera cage. Not only does it NOT fit an O3 camera. But also because the camera cage is so thick it makes the build very hard because you have barely any space for a cap or a buzzer. To make this frame actually work. The camera cage needs to be a lot thinner and smaller to make more room.

[@HunnyFPV]

Where is the weight of this frame? It's funny how they missed this characteristic on product page

[@MrLeeroyfpv]

So gopro angle carnt be adjusted ? Carnt see that lasting long after a few crashes ? And shes expensive no hate just sayin that gopro angle / mount needs attention in my view

[@nicklessticksfpv]

Refine Apex

[@Smagsfpv]

Looks interesting,but expensive

[@xaralampos1959]

This is like the known FR7 , 8 , 9

[@Krash_fpv]

I wish I could get them to send me one and compare it to my demibot

[@lolmetyuri]

Would be good publicity still 6vs7 mm if I'm not mistaken

[@josephdaulton3726]

Drain man, I just bought the era frame, but I still want a heyyy pilots shirt, can you hook me up?

[@jessehoffman5302]

i need that shirt homie! where can i buy one?

[@justreddog]

it look ok(avg),but unknown builders and a 110.00 frame.could be great ,but not for us poor guys to fly.took 2 years to save to get me a used set of integra goggles and a vista.

[@OdysseusVrakas]

DraaaaainMan!!!!!

[@Krash_fpv]

I fly a hero 9 black that thing is 162 grams w Enduro battery.....I'm too scared to use the plywood because cable that runs off your balance lead....I don't care about the 35 grams enough

[@manuelsolano7525]

Nice frame, nice review. but the price, it's too much for me.

[@Viseo3dp]

Not for 150 canadian no way

[@JustForUs-c9m]

Maybe it's good, but 110$ for 5 inch? And why it's better then, let's say, Roma frame?

[@TWEECH45]

Hate frames that don’t tell you the weight

[@SkyzJay]

second

[@VinydFPV]

He said hand squirted!!!😂🤣

[@DESTINYFPV]

110 is too much no way I'm paying over 100$ for just a frame

[@refurbished_fpv]

you're missing Something... because of $10??

[@DESTINYFPV]

@refurbished_fpv no im not saying it isn't good im.just saying there are a lot of good frames out there fo 50$ or less im not seeing another 50$ worth of features. 110$ is to much for a 5 inch frame to me anyway.

[@mikebergman1817]

DestinyFPV is a girl's name

[@DESTINYFPV]

@mikebergman1817 really? Destiny fpv is a strange name for a girl .Although I do know a girl who named her douchbag Mike!

[@trippyzocy]

I like it but there's props in view so its a no no to me.

[@KrispyFPV_]

im gonna have too get me one of deez

[@bjjfpv4616]

It does not break, please man, stop!!!!

[@extremevision8280]

I want to know if this is true... Send me one haha

[@JDDupuy]

$110.00 bucks in this economy? Are you serious? At 80 bucks it would be a hard sell. And you have to buy their camera mounts. Nice looker but I will pass!

[@AlyxFPV]

110 bucks for a re draw Apex? Na no thanks.

[@chewthis5805]

Just buy apex evo then..

[@thefreezezone4583]

Excellant frame, over 100 is way too expensive, even if it was leaps and bounds ahead of all other frames, which it isnt. I could do a few revisions to this frame to make it even better, the fact they ignored these features kinda proves my point in my next statements. Example, new Tanq S 3.5 at 64 usd. What kills me the most, is the lack of american innovation, other than the tanq, not many american's doing much of anything overall but waiting. We as Americans really need to step up the game and be something more than registered dealers of crap made outside of america. It is all just cash cows for most owners, like Rotor Riot/Red Cat....buying up and absorbing companies and still doing it wrong by not investing into buillding's, machine's and workers to make their own products, still shipping products in from everywhere but america, and this will be our downfall. And this just isnt a major problem in the drone industry, this is a serious issue in all aspectgs of manufacturing and development of any kind of product.

[@DRONEPOISON]

So true unfortunately, I fly an American designed frame, but for a frame to compete in price, most carbon is cut in China. I agree with you, I would pay more for a 100 percent American made frame. But most go with what there budget allows.

[@Xtzgkxgfy]

Under 6 minutes