A Normal Day at My Rural Repair Shop

[@mrswes]

Here is a link to Shop Interuption #2 kzbin.info/www/bejne/hpzQgqalhd-ogac And thank you to everyone saying congratulations...I can't keep up with all of the comments

[@crazyfvck]

@Mrs Wes Congratulations! :)

[@anthonydefreitas6006]

Congratulations

[@mohabatkhanmalak1161]

Congratulations, you and Wes are wonderfull.

[@alandwells]

How about a live stream autopsy of the alternator to see if we can see what was bad on it, for fun(?), show off some of that electronics prowess. And it looks like I have to say congratulations! But I'm not sure what for yet as I haven't got to the end of the video....

[@stevericketts810]

Impressive Mrs. Wes.. my son is just graduated and this fall he will go for his masters degree 📜

[@briancasey4917]

Congrats to Mrs. Wes on her Master's. 🎆🎇👍

[@jdmccorful]

Get that PHD.

[@mrswes]

Thank you

[@mrswes]

@@jdmccorful maybe after kiddo is in high school

[@pear7777]

🎉🎉🎊🎊

[@dan_6915]

Wes boi married a smart woman. Lucky chap!

[@bradwhite6254]

Masters degree while working full time and raising Wes and the boy. Way to go!

[@erik_dk842]

Wives often seem to have one more kid than their husband.

[@davidd8435]

Good news travels fast, everyone needs a reliable mechanic when they bring their vehicles to get repaired.

[@Unknown_Ooh]

Bad news travels faster

[@donkaiser6704]

She brings you a beer, and watches the fort for you at the end of a long day.... Count your blessings!

[@dan_6915]

Lucky boi Wes

[@assessor1276]

Very interesting Wes - and hearty congratulations on your Masters degree Mrs. Wes! That is a great accomplishment indeed. I hope the children in your class (and their parents) know how fortunate they are.

[@mrswes]

Thank you

[@francislahey7981]

Wes, I could watch your videos all day long, seven days a week. I'm not kidding. I love every aspect of them - cars, trucks, tractors, dog, family, wit, commentary. All brilliant.

[@18robsmith]

For me "Gravity on my side" is followed by "Gravity functioning normally" and the thing I'm trying to lower gently descending at much greater than 1g and performing a self dismantle operation on the floor.

[@rysacroft]

Fortunately I had just put down my glass of whisky before Wes said that. My laptop has survived to see another day :)

[@llloyd4]

"... it's hard to find a rough road in Illinois..." The sarcasm is strong with this one. *LOL! *

[@shackman9566]

It's hard to find a road here in Pennsylvania they've all turned into rutted trails.

[@llloyd4]

@@shackman9566 Same here in California, the worse part is that we don't have the salt issues like back East.

[@donniebrown2896]

@@llloyd4 don't feel lonely, the way our roads are patched? One guy driving the truck, one very overweight woman slinging a shovel of patch "at" the pothole, two guys in a new Ford fx4 rolling back and forth over the patch. We are very lucky on our rural street, a neighbor owns a driveway company. When he has asphalt left over from a job he brings his dump truck along with three guys to actually repair, fill , and pack it in place with no humps.

[@IAmUndersteer]

“This township road is *glass* smooth…” Township road: GUGUGUGUGU

[@NunamedDragon]

Wes is best

[@bmacd2112]

There's something very satisfying about watching someone else work while I sit here sipping on my coffee and eating a breakfast sandwich! But imagine my shock when I discover I've been sitting here for 3 days!!!

[@mrswes]

😂

[@infocpctrainer]

congrats to Mrs Wes, Masters Degree, wow!! Love the video, nice and long, varied input what's not to like, thanks.

[@DangerousSportsForSeniors]

Plastic body parts were changed but no one said “ in the pile”. Thanks for sharing

[@KeithDiSarno]

That grill would either be unphased or in a million pieces by a light toss. Customer probably wanted the factory one back to sell - nothing wrong with it.

[@pdb4382]

In the bin? MCM...

[@dan_6915]

@vehcor

[@katar0t0]

Finally a longer video! Was looking forward to one of these Wes! :)

[@WatchWesWork]

Yeah it's been a while!

[@Military-Museum-LP]

The word got out in how good you are. The place is packed!

[@kennethhoovler9050]

Happy Saturday! Thanks for letting us Watch Wes Work!

[@jacquejecker4435]

To quote the great Forest Gump, "Life is like a box of chocolates, You never know what you are going to get." You handle it all very gratefully, and a Great congratulations to your wife on the Masters Degree. Besides being a teacher she is also a scholar. Congratulations again.

[@2509498788]

You have patience more than most people (mechanics) You are good at what you do

[@dougthibault8515]

Just watched Day in the life and wanted to say congratulations to Mrs Wes it’s not an easy feat she must be so happy and proud of herself 👍🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦

[@bishopkinlyside8477]

Hi that’s the price you pay living in a rural area but what a great price it is, no annoying neighbours right beside you doing crazy things night and day anyway thanks for the videos really enjoy them , Cliff from Logan city Queensland Australia

[@DieselCreek]

Fix that jeep! And when we gonna see more on the ranger!!

[@madjimbo4176]

Love it when the customer loads the parts cannon for you off Amazon.

[@clayfree7428]

Congratulations to the wife!!! My daughter just graduated this week with her Master’s in Early Childhood Education. She teaches fifth grade... She’s counting the days down to summer break! 😄

[@Dancing_Alone_wRentals]

Congratulations here too!

[@2nickles647]

Awesome 👍. My middle daughter is working on her master's degree in Childhood Education also. She runs the school at a college. My youngest is working on her master's degree MBA.

[@charlesmoore3321]

Variety is the spice of life and some days are ghost pepper.

[@jontrudell7529]

Carolina Reaper!

[@benzlover55]

Stealing that one haha

[@450rmaniac]

You are a great mechanic, Wes. Not many people use scopes and understand them around my parts. They are beyond valuable when you know what you are looking at.

[@lawrenceengel3330]

Good to see you doing your thing Wes 👌

[@Pedroisanickname]

The daily ritual of cleaning your workspace first thing is truly commendable. Some guys will go 30 years or a lifetime without figuring out a simple life-hack like that. This made my day hearing, Thanks. Cheers!

[@sallybrokaw6124]

Wes is taking notice of Mr.hevyshevy who clears off his bench at least twice every vidyah.

[@jake2213b]

I glad you are busy with these hard times. Congratulations on her getting her Masters Degree.

[@mrswes]

Thank you

[@trep53]

Very happy for Mrs Wes getting her Masters completed 👍 not so easy with a young kiddo. It looks like you work well together as a family to get things done. All the while Wes is taking good care of his customers mechanical troubles too. This episode was delightful to watch.

[@mrswes]

Thank you

[@bostedtap8399]

So , Wes, what did you do today??. An eclectic mix indeed. Thanks for sharing.

[@WatchWesWork]

Nothing...

[@bostedtap8399]

@@WatchWesWork Don't let Mrs Wes know that!!!!!. Lol.

[@dfross87]

@@WatchWesWork No you DID lots. You achieved SFA.

[@lisadeyoung5361]

OMG.. You are the first guy I have seen test the Ripple on the diodes. Yeah... 1.5 V pk to pk is out of specs. Putting a load on the diodes was also a clever idea. You never cease to amaze me.... and I worked for NASA.

[@rgmoore]

That steering issue was very interesting. Certainly learned something new there. Thanks

[@gailtaylor1636]

I said intermediate shaft soon as he mentioned the noise. Seen that a bunch. Was NOT aware of the column bearing issue though. Or I've forgotten half of what I knew?

[@ronaldheit196]

One thing you're gaurunteed with one of Wes's vids is it's never a full day. Lots of surprises, semi-frustration and a touch of sarcastic humor. Definitely a nice way to spend some Sunday afternoon time. Even an antique like me can learn a trick or two each one. Thanks Wes.

[@wolleysegap9740]

Wes, get yourself one of those signs that one of the garages I deliver to have. "You don't bring your own eggs to a diner, don't bring your own parts here".

[@WatchWesWork]

I don't care if customers want to buy the parts. I just wish they would get the right ones...

[@terryharvey4811]

@@WatchWesWork THAT'S THE PROBLEM. WE CAN'T JUST MAKE IT FIT. I hate the ones you get 3 1/2 hrs in to the job and then find out that the heater core/evap core they bought don't fit. Hard to move when the steering column is in the trunk. DEAD CAR, DEAD BAY EQUALS A BAD DAY !!!!

[@rick_.]

My shop won't warranty the work if I supply the parts.

[@dot7107]

We warranty the job part and write to the bill that customer had own parts

[@terryharvey4811]

@@rick_. Me either. We can't afford nor should we be expected to eat our labor on a redo of a defective part that we didn't supply. See my reply to dot for a real life reason why no warranty.

[@SuperSrjones]

The road is basically just Bituminised potholes And congratulations on your Masters degree Mrs. Wes!

[@Aengus42]

Woohoo! 🎉Mrs. Wes! Congratulations on your Master's! They just HAVE to promote you now! 😃 You got a nice life there Wes! It may seem mundane to you at times but looking in from the outside, it looks pretty special.☮️

[@boblor2484]

Spent the day working on my John Deere 1650 tractor pretending I am a mechanic and foolishly think know what I am doing, spent about 4 hours fixing what I screwed up a couple days ago then managed to fix some stuff with out screwing it up. Came home and got to watch you do stuff right and make it look easy. Really enjoy your videos, looking forward to the JD tractor repair when you get to that. Congrats to your wife on her Masters now on to her Doctorate.

[@65bugnut]

In my area they did take out a paved road, and go back to a gravel road. The old road was so bad that they put up warning signs for a rough road, and reduced the speed limit to 35 from the original 50. The gravel road is a big improvement.

[@daleolson7205]

The gravel roads are actually more work and more expensive to maintain. But the blacktop is such a big initial expense it just doesn't happen.

[@mph5896]

If the paved road was actually maintained, It would not have turned into total failure. My local main roads, they grind 2-3 inches off every 10 years and repave. Done in a couple days per mile. I understand the $ part of it though.

[@IAmUndersteer]

I used to work at a GM dealer in Laramie, WY, fresh out of automotive tech school (WyoTech) in the quick lube. Folks would truck from Cheyenne up over the mountain pass and then stop in for an oil change in those Acadias or Terrains with the transverse 3.6L. I can agree, based on scalding hot experience, that the oil filter location under the exhaust manifold and 1” from the radiator, when everything is 200°, is *the* *worst.*

[@jdretiree2433]

Vehcor could have changed out that grill in less than a minute with his magic plastic hammer!!!!

[@dot7107]

I'm looking for that tool, not yet founded 🤭

[@jonka1]

@@dot7107 It's just a plastic hammer. The trick is in knowing how to use it. Same principle as the Subtle Knife.

[@SammyFender]

I had a hundred things go wrong as soon as my feet hit the floor this morning so I missed my morning Watch Wes Work. Crappy day is better now as I’m watching! Illinois must have the same type of glass as Ohio! Our country roads are as smooth as yours!!!! I’m not starting my Sunday til I watch Diesel Creek no matter what I wake up to!!

[@martinzeddy]

Congratulations Mrs. Wes on completion of your graduate degree!! (Hopefully that comes with a bump to a new pay scale!)

[@Larry-325]

If I live long enough I’ll get to the army truck. No way! Not getting out of it that easy! 😀😀👍👍 Doesn’t surprise me that your that busy at all. Your the man!!!

[@EzeeLinux]

A most enjoyable vid... I grew up around mechanics and I was always intrigued by the variety of jobs... Never boring. :)

[@edgarburnett2115]

Congratulations, Mrs. Wes!!!!

[@danman9017]

nothing better after hard day work is sitting with the dog and petting him to take out that stress

[@hedge685]

And him licking your face with varmint on his breath...haha

[@alexlail7481]

...just stop petting him if the day is so stressful that he starts losing his hair from your petting 🙃

[@michaeljohnson1006]

If anyone ever gets a noise like a squeaking/grasshopper from the cam alternator belt area it might be the alternator free wheel pulley about to fall off..which makes lots of melted rubber in the pulleys.

[@andrew5792]

New black grill, thats 15 Hp right there!

[@ScottHammet]

But you have to wear a track suit, and put your ball cap on backwards, to get the whole 15 hp.

[@terryharvey4811]

@@ScottHammet Don't forget the huge gold chain, ear phones and sun glasses.

[@CAPNMAC82]

@@ScottHammet And put a bunch of driver education (to places you did not actually attend) stickers on, too.

[@shackman9566]

Thanks again Wess always good. Congratulations to Mrs Wess.

[@vehcor]

Well, I guess I don't have to do a "day in the life" video. I will just send everyone here since this is pretty much how my day goes as well. I can get parts the same day though, usually the wrong ones!

[@WatchWesWork]

I hear that!

[@dan_6915]

Yeah but you got the crew, wich helps.... once a year

[@AvalancheMan]

But Wes has no Gnomes like you do. But at times Mrs. Wes does help with brake bleeding by dangerously climbing to the top of ladders to get in to cars on lifts. lol

[@nickchannel5364]

This genre of mechanical videos is nice because of the variety.

[@IBenZik]

But Pup still loves ya, that makes the day. :-)

[@relaxed1970]

Little tip- spray the plastic push rivets with a lubricant (soapy water ) to aid removal they'll pop right out

[@petegraham1458]

Kind of reminds me of farming, my Dad always bought used equipment, he was of Scottish heritage, we were in Western Canada . What a day was like you were lucky if what you needed started , then it was trouble shooting the smaller issues ! But once he put it into the shop in the winter and we had time to go through it we actually had simple reliable equipment! I enjoy your ability to troubleshoot and your depth of knowledge on controls! By the way in Alberta your wife brought you a “Barley Sandwich!”

[@daviduher6219]

One of the biggest challenges in my business is finding subcontractors who care. Wes obviously cares about doing the right thing and providing great service to his clients. I only wish there was someone here like that to work on my equipment. Wes, keep doing the right thing and you will always be busy!

[@francistheodorecatte]

still use a dot matrix printer at work, and it's only five years old! it's for printing out packing slips, since our label machine is a thermal printer.

[@heinzkot360]

In a standard alternator there is a three phase rectifier. Its build by six Diodes. Your bad signal shown by the pico-scope is caused by a bad phase of the rectifier. Back in older days we were actually able to replace them but since money is more important than anything things habe changed. A company does more likely sell a new alternator then a cheap diode set. However with some messing there is still the possibility to replace them... but whats more difficult is, to get the housing together right again. Most of the time they are glued together. Thanks for your very cool and nice content ! 💪

[@4PeTe2]

your wife should get a big hug and congratulations for the time and effort to complete the Masters - you deserve a celebration for surviving also - all this while everything is closed down. really like your channel for its variety!

[@IBenZik]

Congrats to the Mrs.!!!

[@poolmotorrepairguyFL]

you get a boat. it's more important ! I was in a hit-and-run car accident 2 yrs ago so to give me a chance to type. I'm now just learning how to talk... sorry.. The Florida pool pump motor repair guy approved ! that was good info

[@robh.8214]

Fantastic way to start a long weekend!!!! Glad there were no critter issues to deal with with max on the job!! That road is par for what we have in central Canada. 10% original road, 70% various patches, 20% pot holes.... No Lambos or Ferraris around us here out in the country.... Way to go Mrs. Wes!!! Great job navigating, teaching, a masters, and 2 children.... the little one and the big one.... sorry Wes, could not help myself😄

[@Hfoutdoorsyt]

Lots going on!

[@WatchWesWork]

Yeehaw!

[@chrisfreemesser]

I've worked in IT since forever and as soon as you pulled out that sheet that came with the new alternator I was thinking to myself "who the ^$&% still uses tractor feed paper". Guess you were thinking the same thing, lol!

[@dfross87]

Places whose systems are still set up for self inking carbon paper tractor feed.

[@Rein_Ciarfella]

Post-cleanup word you were reaching for was “cathartic”. (My ex-wife used to call me Mr. Word.) I like to clean up at the end of the day because then when I start work again it feels great to come into a clean shop (or kitchen, as the case may be). Of course there are those occasions when I’m totally wiped out and just say “Screw it!” 😂👍🔧🧰👨🏻‍🍳

[@bethgregory9388]

Your summer is booked!

[@WatchWesWork]

Looking that way!

[@BikerBloke600]

Big Congratulations from Northern Ireland on Mrs Wes getting her Masters, Well Done. 👍👏🍻

[@jontrudell7529]

Lookin Forward to the Military truck!

[@korvtm]

Seeing that shaft that was expected slide in and out,reminded me of a job I once was involved with.We had a Bucryus-Erie 12.5 Ton crawler crane that used a similar Rod in the steering.Rod rusted in place,crane would not steer,Was brought to our shop by an idiot that was using a bulldozer to push the crane side to side to keep it headed in the right direction.No parts available,we removed the rod finally got it seperated sandpapered it clean replaced the spring greased the rod up,Hey,presto,we had steering.

[@PineHollowAutoDiagnostics]

Great video, Wes! Looks like you are staying busy :)

[@douglasjreynolds]

Congratulations to Mrs. Wes! School while work is not easy!

[@hardwurkindaddy]

I used to check alternators, when I didn't have a good load tester, by turning my voltmeter to AC voltage. If an alternator was putting AC out then the diodes were failing. I don't know if that still works on today's ecm controlled alternators, I've never tried it.

[@slowride55]

I knew the alternator in my 02 Silverado had a bad diode because driving down the road at night the lights would pulse.

[@Rein_Ciarfella]

I saw that stack of boxes against the back wall earlier in the video and thought they might be bulk drinking water. Bulk oil! Congratulations! It’s these kind of forward steps that make your job so much more efficient and easy! For years I could only afford to get one particular flour in 5 pound bags. Cutting and dumping 20 bags into a rolling ingredient bin was always a PITA chore but it was all I could do at that time. Nowadays I’m able to source that flour and all 4 other flours I use in 50 pound bags. Baby steps... 👍👏👨🏻‍🍳

[@rhiantaylor3446]

That looked like a 2-phase alternator - i.e. down one phase, probably a dead diode in the rectifier pack or perhaps a burnt out stator winding.

[@WatchWesWork]

It's a 3 phase alternator, but yeah I think you are right about the diode.

[@TokyoCraftsman]

Congrats to Mrs. Wes! Wes, does this mean you can now retire? LOL Cheers from Tokyo! Stu

[@shaneharrison4775]

Congrats Lady Wes.‼‼👍

[@mrswes]

Thank you

[@johndunbar2393]

I can't help but wonder if Wes gets as many blank stares, when he deals with people, because they don't pick up on all the dry, one liner sense of humor he uses. Always good for a laugh and education.

[@marlinezell639]

He's pretty wise in his young years. He must hang out with some older fellers

[@johndunbar2393]

@@marlinezell639 Judging by past videos, I'd say alot of comes down to the fact he has a Dad that cares and probably took the time to teach him things.

[@marlinezell639]

@@johndunbar2393 I totally agree with you there.

[@donniebrown2896]

@@johndunbar2393 and a truck load of just plain common sense.

[@chrishoward8473]

congratulations to Mrs. Wes!

[@anthonydefreitas6006]

Interesting video 👍. Wes do you find KZbin brings customers to you?

[@ianburit3705]

BIG congratulations to the pretty lady for her achievements, oh, well done Wes for persevering with them damn cars again.

[@edwardsabo8368]

WOO HOO business is good. CHEERS!

[@paulsullivan6392]

Yes indeed...a peek into your world and how it really is. Edited video is deceiving. We know things take longer and are harder to accomplish than the video relates. Good work from an honest guy. And congratulations to your better half. Wife...mother...teacher and now a Master's Degree. No easy task. Well done young lady....well done.

[@CrazyPetez]

Congratulations to your wife for getting her masters degree🏆.

[@mrswes]

Thank you

[@milfordcivic6755]

@13:50 - I'd rather go home and have everything put away, so coming in the next day you're ready to go and have no mess to face. Then again, that's just me.

[@gailtaylor1636]

Yep. Shops in NC expect you to have turned 5 hours by 9:0AM. Better have your bay clean and tools ready by 7AM. Trash emptied every night. Shops run from 7AM-9PM. Some overlap on shifts.

[@christoengelbrecht4294]

I really like the longer videos. This was very interesting. A day in the life....

[@williamfindspeople4341]

Ah yes the automobile business, I grew up with it. Now enjoying retirement. No more busted knuckles.

[@gailtaylor1636]

Me too. Retired last March right about time crap hit the fan. Wiring up storage shed couple days ago and managed to nearly attempt a frontal lobotomy on myself. Pulling on a wire with needle nose...whoops. Your skull leaks profusely with very little damage. Stream of blood the size of a pencil. House looked like a crime scene. Gonna be several days for it to heal. OUCH!

[@MortskeRepair]

Raptor edition Furd Edge!!! As soon as you said that pickup had a clunk I knew exactly where you were going with that one!

[@WatchWesWork]

Shouldn't you be busy with a stuck flathead?

[@MortskeRepair]

@@WatchWesWork Nahhhh, it was barely stuck this week... It's the OHV units that have been drinking enough water to drown a horse that are killing me these days!

[@olnamgrunt9857]

Wish I lived closer so I could brother you too, lol .

[@mholdner]

The Ford dealer in Healdsburg, CA had a dot matrix printer in their service department until last summer. It printed on the three copy paper with the tear off sides. I always marveled that they still had that thing running after all these years. They replaced it not because it broke down, but because getting the paper printed up with their header, etc, was getting harder and harder.

[@Very_Angry_Citizen]

The electronics and computers in todays cars make them convenient but a pain to diagnose. I miss the simpler times of the 70's & 80's engineering.

[@oldguy4833]

very interesting scope diag on the alternator -- and HUGE CONGRATS to Mrs Wes on completion of her Masters !!!!!!!!!!

[@johnfadin6]

40 minute video"Nice" especially on a Saturday morning. If you are ever in California stop by for a beer.NO! don't... Turn around and get the hell out of here as fast as you can.😳

[@WatchWesWork]

I've been to California 4 or 5 times. Always enjoyed it. Probably wouldn't want to stay, but fun to visit.

[@jeffhyde7934]

Man, I'm so glad I moved to Florida! I'm from Northern Ill. (DeKalb) and got so tired of working on rusty stuff all the time!

[@FAL0perator]

Thanks for the new content!

[@dmceowen1]

Thanks for helping the Neil and his family Looking forward to watching your channel

[@kutamsterdam]

Thanks for letting me watching you work Wes. 🛠

[@gwpsr58]

Congratulations to Mrs. WWW! That's an accomplishment to be proud of.

[@ronaldheit196]

Congratulations on Mrs. Wes's Master graduation. It's not easy to achieve that level. Next step. Her Doctorate. The Wes will have to address his sweet heart as yes dear Doctor, the honey do list is done.

[@RichardWilson-sh3kr]

Wes, I dig the channel. I just want to say the coolest part of this video was the Ford edge grill install. I only wish you could have included a before and after video. I can't imagine how much power that added. Talk about blowing your hair back, pinning you to your seat, raw power. Probably needed it with that trailer towing package you added. Cheers

[@chrisanderson9856]

I have a 2006 Silverado with 171,000 and have never replaced any of those steering parts. My truck has spent its entire life in Eastern and North Iowa in the rust belt. However, I do drive my truck daily and never sits to long. I will say I have had to put a reman motor from Jasper at 113k as I had an oil return port crack and take out cylonder 2 and 5. Truck 171k motor 58k. Great videos!!! Congrats to Mrs. Wes!!!

[@MC-ft8zv]

WWW is my favourite channel on You Tube. Videos like this are part of the reason why, showing what obstacles come up in Wes's day to day worklife, great for people to see his job isn't straightforward. Great mechanic, great guy, and of course the lovely Mrs Wes is always nice to see as well. Great channel Wes, thank you for allowing us to get a glimpse into this part of your life. Cheers from New Zealand.

[@garyfeltus9801]

Congratulations to you wife. Wes love to have a mechanic of your ability in my neighborhood. Love your video content. Supper great videos.