A whiskey barrel DIY. Calculations. Templates. Corners. Assembling and tightening the barrel

[@polychronisrempoulakis3588]

the ultimate video on barrel measurements and assembly, great great work! I have seen your previous videos and they are splendid, but in this you took the whole process one step further!

[@tmzhenatanwoodworking7252]

Thank you!!! I'm glad the video was helpful to you...

[@bobvitas4132]

I have watched all your videos and understood the basic process, but having you explain it - even with KZbin's translation - makes it much more detailed, and gives me a new appreciation for the work you put into your barrels. Thanks again!

[@tmzhenatanwoodworking7252]

Thank you! I am very glad that you liked my work and my video was useful to you... I will post a sequel soon...

[@hildemanduran1994]

Lo saludo desde Colombia. Encontré su video mientras intento hacer uno para decoración. Gracias señor. ⚱️

[@tmzhenatanwoodworking7252]

Muchas gracias!!! Saludos desde Ucrania!!!

[@zachmcwilliams8412]

Absolutely the best description of “how-to”! Thank you for allowing us some insight into an amazing, yet sadly fading trade.

[@tmzhenatanwoodworking7252]

Thank you!!! I'm glad you liked my video...

[@zachmcwilliams8412]

@@tmzhenatanwoodworking7252 Quick question for you. I’m trying to recreate your jig for routing the angles but am having trouble. What type of material did you make it out of and is there any specific dimensions for a guide for it or is it simply just to hold it in place? Thank you!

[@tmzhenatanwoodworking7252]

@@zachmcwilliams8412 Here is a video on my second channel. How to make a router for processing oak barrel staves: kzbin.info/www/bejne/e2aynpiGqqiMga8

[@zachmcwilliams8412]

@@tmzhenatanwoodworking7252 You’re awesome!!!! Thank you so much!

[@zachmcwilliams8412]

Soo I thought I had a god supply of white oak for making barrels but apparently they are red oak. Should I go buy white oak or can I stick with red? I’d like to age some unaged whiskey I get from a local distillery. Thanks!

[@NeonShillo]

Great video,,!

[@tmzhenatanwoodworking7252]

Thank you!!!

[@LOL-ql2qs]

I love this

[@VALTERORTIZLACE]

Parabens exelente aula sobre Barris.🇧🇷

[@tmzhenatanwoodworking7252]

Obrigado!!!

[@LOL-ql2qs]

I hope one day I want to be like you...

[@tmzhenatanwoodworking7252]

Thank you! I am very glad that you liked my work and my video was useful to you... If you have the desire and a little patience, you will certainly learn how to make barrels! I'll post a sequel soon...

[@tmzhenatanwoodworking7252]

Hola a todos! Nuevo video en el canal "TM ZHENATAN Woodworking". Cómo hacer un barril con tus propias manos. Revelando mis secretos... ¡Amigos! Te deseo buena salud y un cielo pacífico sobre tu cabeza. Dale me gusta y 👍 suscríbete a nuestro canal!!! ¡¡¡Disfruto ver!!!

[@2000coddoc]

I wish to be a cooper like you

[@tmzhenatanwoodworking7252]

Learn... I am also self-taught... Watch my videos, ask questions, and I will help you with advice and try to convey to you everything that I know myself...

[@tmzhenatanwoodworking7252]

Hi all! New video on the channel "TM ZHENATAN Woodworking". How to make a barrel with your own hands. Revealing my secrets... Friends! I wish you good health and a peaceful sky above your head. Like and 👍 subscribe to our channel!!! Enjoy watching!!!

[@michaelmcinnis7635]

Hi Eugene, I hope you are safe in Ukraine, and are having a good week so far. I am interested in trying to make a barrel myself, but am hung up on the way the router is set up to cut the staves at an angle (timestamp 9:31). I think mounting the router to an angled plate cut to 9 degrees would work for a few barrels, but ultimately an adjustable mechanism would be ideal. Would you mind sharing your setup for mounting the router at an angle? Thank you, Mike

[@tmzhenatanwoodworking7252]

Hi Mike!!!Thank you very much!!! I installed the router stationary, and adjusted the angle with a movable tabletop. Watch this video with subtitles on my second channel. I think it will help you. Here is the link: kzbin.info/www/bejne/e2aynpiGqqiMga8

[@rimski7265]

A great video that explains how to make barrels, I have been looking for something like this for a long time on KZbin. I am going to try to make a cable tensioner to close the barrels up, did you make it yourself? Thanks for sharing your knowledge 👍

[@tmzhenatanwoodworking7252]

Thank you!!! I am very glad that you liked my video. I made the barrel tightener myself.

[@kirkwasson7531]

Great video and explanation. Question. The dimensions on the template jig sheet did not seem to match the spreadsheet. Can you explain the measurements on jig template? Peace and keep up the good work.

[@tmzhenatanwoodworking7252]

Thank you!!! The template that is drawn on the sheet is simply given as an example for clarity of calculations ...

[@charlesdeshler202]

Are those charts available? I would like to try and make a set up like you have. Very nice work

[@tmzhenatanwoodworking7252]

Всем привет! Новое видео на канале "ТМ ЖЕНАТАН Деревообработка". Как сделать бочку своими руками. Раскрываю свои секреты... Друзья! Желаю крепкого здоровья и мирного неба над головой. Ставьте лайк и 👍 подписывайтесь на наш канал!!! Наслаждайтесь просмотром!!!

[@marcosfrança-z3b]

aqui do Brasil tentando aprender

[@tmzhenatanwoodworking7252]

Sou um tanoeiro autodidata. Assista meus vídeos e aprenda. Este é um ofício muito interessante. Se você tiver alguma dúvida, escreva para mim. Sempre responderei e ajudarei você com conselhos. Boa sorte!!! Olá da Ucrânia!!!

[@marcosfrança-z3b]

@@tmzhenatanwoodworking7252 obrigado

[@rafaelsantander2482]

Hi! I’m in the process of figuring out how to make a small batch of barrels with very particular sizes. Can you help me out to calculate the difference for the staves, the angles and all that based on the height, top and middle measurements? This are the measurements Height 650mm Top 400mm Middle 450mm I would really appreciate the help

[@tmzhenatanwoodworking7252]

Hello. I recommend using 24 barrel staves 655mm long and 60-61mm wide in the middle and 52-53mm wide at the edges. The angle of the side edge of the barrel staves will be 7.5 degrees. Good luck!!!

[@mahmoodf6340]

💜💜💜😀😀

[@jcvflorestal5643]

Olá Zhenatan.....eu acho muito importante as medidas e dimensões, porém fico me perguntando, como certas coisas podem funcionar......por exemplo... achei um vídeo aqui de um português que simplesmente não usa medida alguma, suas aduelas são todas de tamanhos diferentes, ......como isso se explica ?…...vou por o link do vídeo para você analisar.....kzbin.info/www/bejne/rZLck2WKnsl8gacsi=k5X85GqSNxvANDQk

[@tmzhenatanwoodworking7252]

Obrigado pelo link para este vídeo. Em breve mostrarei como fazer aduelas de diferentes larguras sem usar molde e como fazer barris com aduelas de diferentes larguras. Neste vídeo, o tanoeiro usa blanks com nós, o que não é aceitável na fabricação de barris para bebidas. Também notei que ele usa aduelas de barril com os anéis de crescimento da árvore correndo na diagonal em vez de radialmente. Isso fez com que uma das aduelas do cano estourasse após apertar o cano (você pode ver isso aos 24,20 minutos do vídeo)... Não sou um tanoeiro profissional, mas não posso me dar ao luxo de cometer tais erros...

[@jcvflorestal5643]

@@tmzhenatanwoodworking7252 .... muito obrigado pelo comentário.....vou esperar ansiosamente pelo vídeo das aduelas de diferentes tamanhos...... muito obrigado pela análise.