Your ability to cut and manipulate plaplate is just inspiring. This is always my biggest fear when cutting out the doors, having to scratch build the interior parts but you make it look so easy! I just love your work.
@A4Garage3 жыл бұрын
Thank you so much. I love these fun making times too.
@gonzalogochicoa68153 жыл бұрын
Amén Mr.
@hewlett-packardlovecraft22973 жыл бұрын
Five minutes into this video, and I'm grinning from ear to ear. Cannot wait to see how you finish one of the most beautiful cars ever designed- worth the wait in every aspect. You won't make us wait too long, will you? Have a great week.
@A4Garage3 жыл бұрын
Thank you so much for your comment. I will hurry to edit the next video.
@hewlett-packardlovecraft22973 жыл бұрын
@@A4Garage No worries- take your time; I'm just being greedy. Thanks for the reply, and keep on amazing us.
@A4Garage3 жыл бұрын
Thank you for your expectations.
@local562 жыл бұрын
You are at a different level in model making, fantastic to watch.
@insomniahobbies3 жыл бұрын
This is quickly becoming my new favourite channel!
@A4Garage3 жыл бұрын
Thank you. I like your channnel too.
@lavienroseulsan22703 жыл бұрын
한국분이셨군요. 정말 놀랐습니다. 이 정도 디테일을 구현하시는 분을 전혀 본 적이 없었던거 같은데, 대단하십니다.
@A4Garage3 жыл бұрын
좋은 말씀 감사합니다~^^
@davidgillyon5863 Жыл бұрын
I've just 'stumbled' across this and am in awe of your skill and what must be a great deal of patience. I've been building car kits for years and have occasionally detailed up a 1/24 car but never to this extent. I think if I tried to remove doors, bonnet and boot the kit would end up in the bin! If you are UK based then you should enter in the competition at Scale Modelworld show (early November every year) because you are likely to get a Gold medal for this build.
@jadams3427 Жыл бұрын
Brilliant ! You just need to scale it up 24 times and it would be as good as a real one ! 'Really impressive work.
@guspisano97773 жыл бұрын
I've been hoping for this. The best hands on KZbin building one of the most iconic cars ever! Can't wait to see what comes next
@A4Garage3 жыл бұрын
Thank you so much for the nice compliment. I love this wonderful car.
@domingosuarez85382 жыл бұрын
Alucinante, increible, eres un verdadero master
@PHT-m8t2 ай бұрын
Amazing work! What is the yellow putty that you use? Is it Tamiya?
@A4GarageАй бұрын
I hope this helps you. kzbin.info/www/bejne/bqfamWybjdSqbtk
@АндрейОрлов-ь8т2 жыл бұрын
Шикарный уровень мастерства , мне до такого лет 10 расти)
@kylelee63093 жыл бұрын
한국에서 아니 세계적으로도 이정도로 높은 퀄리티로 작품을 만들어내는 분은 거의 못본 것같습니다. 볼 때마다 항상 놀랍습니다. 전시회라도 하시면 선생님의 훌륭한 작품을 소개하실 수 있는 좋은 기회가 되지 않을까 싶습니다. ^^
@A4Garage3 жыл бұрын
과찬이십니다.. 늘 응원의 말씀 감사합니다^^
@willsonwang83072 жыл бұрын
What is the material of the white plastic plate? TKS!
@A4Garage2 жыл бұрын
You can find it by searching on a pla plate or pla sheet.
@badassfood57133 жыл бұрын
After I watched this first video, I thought, how could there possibly be 10 more. Now that I have watched them through a second time, now I say, only 10 videos, how is he ever gonna get it done in time. Thanks! Love A4 garage!
@A4Garage3 жыл бұрын
Thank you for watching. I didn't know it would be this long either. There are more things I want to make than I expected.
@petemelanyevans91623 жыл бұрын
You are a genius . I don't usually watch car kits being made .but the level of detail you hand make just begs belief. I would normally buy PE to add delicate detail .you make it .amazing . I could watch you all day in total amazement of your skill . Thank you for your video .
@A4Garage3 жыл бұрын
Thank you for your high rating and kind words. I really enjoy the time I spend researching and making my favorite cars.
@cratecruncher66873 жыл бұрын
Part 1? Dang, there was quite a bit of great modeling in Part 1. Can't wait to see what's in store in Part 2, 3,4,5, etc. I'm sure it takes a lot longer to build when a camera is between you and the work. Most people that build well don't have the patience to document all this detail. So most KZbin stuff is phoned in (unboxings, etc.). Thanks for proving it can be done!
@A4Garage3 жыл бұрын
Thank you. Please enjoy watching.
@terrylee91593 жыл бұрын
그냥 진짜 스포츠카를 한 대 만드시는 것 같네요. 정말 입이 다물어 지지 않네요. It really seems you are making a real sports car. It is just mind-blowing.
@A4Garage3 жыл бұрын
감사합니다. 좋아하는 차량을 관찰하며 만드는 저에게도 재미있는 시간이었습니다.
@georgeclements27423 жыл бұрын
Magnificent model of a sensational prototype. The designer of this car was a real artist. It must be so difficult to produce a vehicle that is aesthetically superb and also performs brilliantly.
@A4Garage3 жыл бұрын
I think so too.
@MustangMustang-jo1rt2 жыл бұрын
Magnifique travail! Toujours aussi passionnant de regarder vos vidéos Quelles sont vos sources d'information pour avoir connaissance de tous ces détails et dimensions?
@A4Garage2 жыл бұрын
I am getting all the information through the Internet. Thanks.
@cuttysark7934 Жыл бұрын
Great video! It is so inspiring to watch you as a aspiring model builder! I appreciate that you did not have background music. To hear the sound of plastic against plastic and even the sound of you removing masking tape adds another level of experience to already a great video !
@A4Garage Жыл бұрын
Thank you for enjoying.
@stephenramnanan2593 жыл бұрын
Hello, Stephen from Trinidad & Tobago , 1st let me apologize for not watching your channel , I will admit that I love all the model car builds channels ,but dude you and only a few other channels pay sooo close attention to all the fine details , thumbs up bro Great video , I'll be watching this channel No.1
@A4Garage3 жыл бұрын
Thank you so much for the high praise.
@lioneldeltombe47653 жыл бұрын
Absolutly incredible !!! Such a work.... BRAVO
@A4Garage3 жыл бұрын
Thank you.
@didiervibert61113 жыл бұрын
Des simples monteurs de maquettes il y en a énormément sur KZbin , mais des artistes comme vous on les compte sur les doigts d'une main !! Moi même j'améliore mes modèles avec de la photo découpe et j'adore vous observer pour me donner des idées . Toutes mes félicitations et vivement la partie 2 !! 🙄
@A4Garage3 жыл бұрын
Merci beaucoup pour le grand compliment, l'intérêt et l'anticipation.
@Josh-xr1xu2 жыл бұрын
Absolutely amazing work. What is the metal you used to make the rear frame. Seems to solder very well. Again, great work. Love it!
@A4Garage2 жыл бұрын
It is a soldering nickel silver. I thought soldering was the best way to hold the weight of the hood. Thanks!
@rayneaustephane27578 ай бұрын
hello and thank you for your videos, as well as on the mustang! you are completely crazy, “crazy”! I'm already happy when I manage to do a good painting and put in 2 or 3 lights, but you are the surgeon of the model! for this one, what white plastic are you using and what is the point of using it? Is it for aesthetics, to plug future holes or to reinforce the structure? and what is the slightly "yellow/orange" product that you see when you prepare the car, is it putty to see the defects? thank you for your response and see you next episode I'm going to watch!
@A4Garage8 ай бұрын
Thanks. Please refer to this. kzbin.info/www/bejne/bqfamWybjdSqbtk
@terryip26362 жыл бұрын
incredible tracing technique! The pla plate was cut like they were pre-cut! Would you like to share how to improve tracing?
@A4Garage2 жыл бұрын
There are no drawings other than the photos collected on the Internet, so there is no other way than trimming them while matching them. Thanks.
@ralphford43023 жыл бұрын
What a beautiful and inspiring job on the scratch building. This video is an inspiration to go for it and transform the mundane into a work of art
@A4Garage3 жыл бұрын
Thank you. I was attracted to the beauty of this car
@JHartModelworks3 жыл бұрын
Incredibly impressive. You make it look so much easier than it is.
@marccxxshammer66433 жыл бұрын
This is model making at the highest level 👍👍👍
@SirJohn20243 жыл бұрын
Just WOW! 😳 Next time just build it all from scratch... 😊 Kudos... 👏👏👏👏
@laurentdeloecker82313 жыл бұрын
Amazing job !!! Just perfect ! really inspiring !
@A4Garage3 жыл бұрын
Thanks a lot!
@bjhbjhbjhweeee Жыл бұрын
MASTER OF BULID SCALE MODEL
@Dylan-ug6jp3 жыл бұрын
This is absolute perfection, I'm speechless Sir, this is Art. My hat off to you, thank you so much.
@A4Garage3 жыл бұрын
Thank you for your high praise.
@chuckymonster10002 жыл бұрын
You do great work.what kind of filler do you use?
@A4Garage2 жыл бұрын
I am using Tamiya polyester putty. Thanks.
@johndavey723 жыл бұрын
Just absolutely love your work ! The epitome of patience and skill in miniature ! Thankyou.
An amazing modeling, congratulations and thanks for another piece of art! Where do I buy that set of scribing you used (2:15)?
@A4Garage3 жыл бұрын
Thank you. It is a Funtec Line Engraver 0.15mm.
@adrianbekerian45183 жыл бұрын
Una locura, hoy aproveche en ver tu publicación porque quería ver tranquilo y disfrutar el momento, como siempre una locura lo que haces, mientras yo me pregunta en Instagram cuando llegabas a publicar esta maqueta.
@A4Garage3 жыл бұрын
Gracias por su continuo interés y apoyo. También quiero subir el video, pero lleva bastante tiempo. Así que espero que disfrutes el video.
@tengkuahmadfaiztengku43333 жыл бұрын
May I know what size mm styrene sheet that you use? It will be a great help to all fellow modellers if you also state the material you use and the size each time. Thanks for the great video, as always.
@A4Garage3 жыл бұрын
I use several sizes of styrene. I can't remember the exact size because I add it when I think it's thin, and cut it off when I think it's thick. Even the same parts are different sizes for different car. The exact size I know is written. Thank you.
@petermillecento49063 жыл бұрын
Amazing craftmanship!
@A4Garage3 жыл бұрын
Thanks!
@gr55353 жыл бұрын
😮 Christmas in July 🎅 Thank you for that , I'll be waiting here impatiently for the next installment ⭐⭐⭐⭐👍👍🏁👏 , subscriber from now on 😀
@A4Garage3 жыл бұрын
Thank you for watching and interest.
@grahampack43543 жыл бұрын
Extraordinary work and unbelievable craftsmanship. May I ask…do you use a workshop manual as a reference guide?
@A4Garage3 жыл бұрын
Thank you. I don't have a manual. I made it through trial and error by referring to many photos on the internet.
@jarkmodels3 жыл бұрын
Is always such an inspiration to watch your videos! Your work is beautiful and so relaxing to watch. If I may ask, where do you get the info to achieve such a detailed build? Personally, when doing my models, I found it very difficult to get good references, but you seem to know this Lambo literally inside out! Amazing!
@A4Garage3 жыл бұрын
Thank you very much. As you said, it's really hard for me to find references for work. I had no information before starting this vehicle. It took quite a while to collect, categorize and analyze photos on the Internet. In the case of Miura, photos of the P400, P400S, and P400SV had to be sorted and the original parts also had to be analyzed. I don't think it's perfect... Anyway, I was able to do that because I wanted to make my favorite car look great.
@jarkmodels3 жыл бұрын
@@A4Garage Well I think you have certainly achieved what you wanted. The car looks spectacular! So, is it all for the internet? or some references books as well? Do you have any particular websites you'll recommend or is it just plain Google? Can't wait for part 2. Cheers my friend.
@A4Garage3 жыл бұрын
I found all reference pictures on the internet. I referenced about 800 pictures of each part that I found on Google. Thank you so much.
@Marie5793 жыл бұрын
Ohhh I LIKE you you’re going for the full monte!!! Your’e what modelling is supposed to be about, I’m a fastidious nit picking sod who isn’t easily impressed with much of the offerings for model makers on youtube but you are worthy of praise ! And you can use a needle file, BLOODY AWESOME 👏 this would I believe make Gerald Wingrove smile, if you haven’t herd of him check out his work he did, unfortunately he’s passed away now but his website still works.
@A4Garage3 жыл бұрын
Thank you very much for the high praise. I also checked his website. I was impressed with the great work.
@keefr223 жыл бұрын
So good to see another video build from you again - and more magnificent modelling in it! I love how you get all those pieces to fit so well together - I can measure, make templates and cut a hundred pieces and they never fit like that! :-)
@A4Garage3 жыл бұрын
Thank you very much. It takes quite some time, but it's fun to make something by hand. Also, this is a fun hobby.
@filmdyret3 жыл бұрын
Awesome 👍👍 , what is the white material you build parts from ?
@A4Garage3 жыл бұрын
Thanks. What I used is styrene and plastic rods and plates.
@filmdyret3 жыл бұрын
@@A4Garage thanks 🙏 I'm building a DS19 from Heller and has some bad moulding , but I'll make the best of it . You're a professional 👌👌
@randomnickify3 жыл бұрын
Lol, watching this video now after watching few of your latest videos allows me to appreciate how much you improved this kit and that begs the question: is there a reason why you choose that simple Hasegava kit instead of some better quality model? There are no better kits on the market? You like challenge? Or without particular reason, you just had one? :)
@A4Garage3 жыл бұрын
Thank you. In my personal opinion, among the 24 scales, Hasegawa is the best.
@randomnickify3 жыл бұрын
@@A4Garage Thanks, I didn't build any kit for decades so I do not know whats considered bad/good this days, still amount of details you add to this models is breathtaking, I half expect in the end you will pick very small key, put it into very small ignition switch, turn it and the car will startup :)
@ДмитрийВьюжанин-д6г2 жыл бұрын
Отличная работа!!! 👍👍👍
@f.s.5962 жыл бұрын
amazing job👍
@1v4n262 жыл бұрын
the white parts and what material are they made of?
@A4Garage2 жыл бұрын
It's pla plate and styrene.
@cg4622 жыл бұрын
Awesome skills, I'd love to see you resuscitate AMT's 1/25 scale 1955 Mercedes 300SL gullwing
@PlasticImaginationWorkshop3 жыл бұрын
Wow, amazing work. I subbed so I'll be checking out the rest of this series and more of your videos. I've had my eye on this kit for a while, this may just push me to get one after I thin out my current stash of kits. Have a great day.
@A4Garage3 жыл бұрын
Thank you for watching and following.
@taka-tb9fl2wr5z3 жыл бұрын
ランボルギーニで使われたエッチングパーツはどこのメーカーのものですか?
@A4Garage3 жыл бұрын
スタジオ27のエッチングです。
@keithsmodelsandrcs65933 жыл бұрын
Amazing as iv said to u many times this lambo turned out suer clean detail in engine u done was next to no other awsome talented builder there's work in ur hobby out there people would order and pay for your skills amazing simply amazing.. 👍 I've the gold/yellow italeri oe these but never be as good as build as any of your builds, 👍
@A4Garage3 жыл бұрын
Thank you. I really enjoyed doing this. I really love Rambo.
@badassfood5713 Жыл бұрын
Looks down into the box “250 parts… hmmm, I can beat that!”
@TD-Modelisme3 жыл бұрын
You did your magic again !
@A4Garage3 жыл бұрын
Thank you for nice comment.
@proinnsiasoc3 жыл бұрын
이것은 절대적으로 환상적인 작품입니다. 비디오는 명확하고 따라하기 쉽습니다. 디테일이 추가되고 품질이 놀랍습니다. 시간과 노력에 감사드립니다. 아일랜드에서 온 이 메시지에 대해 Google 번역이 명확하게 작동하기를 바랍니다.
@A4Garage3 жыл бұрын
Thank you for your kind words. Your message has been well received.
@ryusakuk71013 жыл бұрын
このフレームの金属パーツは何線ですか? ハンダは普通のハンダですか?
@A4Garage3 жыл бұрын
洋白線で普通のハンダです。
@jean-luca6213 жыл бұрын
Magnifique, bravo un vrai pro!!
@A4Garage3 жыл бұрын
Merci bonne journée
@bearwish433 жыл бұрын
Truly inspiring 🙏
@christiankohl52693 жыл бұрын
Your engraving tools are very interesting. What is the name of the manufacturer and where can I get it?
@A4Garage3 жыл бұрын
It is a Funtec Line Engraver 0.15mm. You can find it by searching.
@hansdampf21963 жыл бұрын
Maestro! Great Work!
@cushionbelly25193 жыл бұрын
Amazing talent 👏🏻
@markc70023 жыл бұрын
Simply exquisite
@mamannki3 жыл бұрын
いやいやいや凄いです。寸法どりどうやっているのか知りたいです。感動しました
@A4Garage3 жыл бұрын
有難うございます。図面などはなくただ写真を参考にして、削って合わせてを繰り返して作っています。
@RXcrazzdАй бұрын
Sugoi des ne!!! I just cannot believe what I just saw! WTF!!
@santiagogarcia18303 жыл бұрын
🙌🏻🙌🏻
@Petrovich-27m10 ай бұрын
фантастика !
@abdulbedul3 жыл бұрын
Cant wait to the next episode...🤭👍
@A4Garage3 жыл бұрын
Thanks!
@fadisamman55462 жыл бұрын
Thank you
@savchukviktor5793 жыл бұрын
Афигеть просто👍😱
@nate_geo18213 жыл бұрын
Why did he even buy the kit if he’s just gonna make the whole thing? Jk this is a great vid
@A4Garage3 жыл бұрын
Since I don't have any data, the base kit is very thankful things to me.Thanks.
@titkiwong2602 жыл бұрын
😰👍👍👍👍👍👍
@maliind3 жыл бұрын
As before this is more then a build its a restoration
@A4Garage3 жыл бұрын
Thank you!
@zooobidooo3 жыл бұрын
Wow ! That car is more accurate than any real Miura that left the factory in S.Agatha.
@innpressTV2 жыл бұрын
ハセガワが凄い
@lgorni3 жыл бұрын
😲😲😲😲😲😲😲
@davidparker22593 жыл бұрын
Wow, what an amazing set of skills you have. Kiss my ass. Ha ha. If I tried something like that, I’d have a pile of styrene and a bunch of parts glued to my fingers. I’m glad your channel came up for me to watch, and I can’t wait to see the rest of your videos. Absolutely beautiful work. Wow, wow, wow.
@A4Garage3 жыл бұрын
Thank you very much. I was delighted to be able to take a closer look at this beautiful car and have fun making it.
@АнтонБезносов-г1ъ3 жыл бұрын
Зачем вообще покупал модель? Считай "из коробки" ничего живого не осталось
@A4Garage3 жыл бұрын
Я хотел проработать детали, которые были бы ближе к реальной машине.
@АнтонБезносов-г1ъ3 жыл бұрын
@@A4Garage вам это удалось) Я свои модели тоже стараюсь доработать, но не так радикально как это делаете вы