A6X - 10k Drop-N-Load® Airbag Car Hauler | MAXX-D 2021

When you need a trailer that can haul low cars, doesn’t use ramps, and has a smooth ride, the MAXX-D A6X Drop-N-Load airbag carhauler is the trailer for you!
The Drop-N-Load airbag carhauler uses its airbag suspension to lower and raise the trailer with the push of a button. The design of this trailer not only makes the trailer super easy to use, but it also allows you to load low vehicles, and gives the trailer a smooth ride as well.
The Drop-N-Load Airbag Carhauler is a 9,990 GVWR trailer that you can haul with a ½ ton or bigger truck. The Drop-N-Load is built in 20’ or 24’ deck lengths, and weighs between 3,700 and 4,000 pounds, depending on options.
maxxdtrailers....
For more information on this trailer, see:
maxxdtrailers....
If you'd like to see a trailer like this, or buy one, find your nearest MAXX-D Dealer here:
maxxdtrailers....
#cartrailer #maxxdtrailers #dropnload

[@c1run1]

Amazing Trailer !! I hope to get one some day !

[@FuquarProductions]

BASE MSRP $17,333

[@630filmz4]

Wow beautiful trailer take my money now

[@tazzthedoodle7861]

3700-4000lbs shes a heavy beast

[@obsornobs6063]

I wish they could handle a more the 6k this would be nice for hauling my truck to shows when I finish building it or other projects that waiting to get done

[@Maxxdtrailersofficial]

Right! Our 14k Drop-N-Load has been discontinued, but it may be making a comeback in the future.

[@obsornobs6063]

@@Maxxdtrailersofficial ok and i hope it does it would be a good trailer for what I need

[@Bodie2020]

If you have 12k in axle rating plus tongue rating your are either defraying the hell out of this trailer or you have built it way too heavy.

[@kschult12]

What kind of Truck do you have that weighs more than 6k?

[@obsornobs6063]

@@kschult12 a 97 Ford F-350 cclb 7.3 with a 6” lift 37s and a big ass tool box In the bed with all my tool and stuff in it

[@deanzynda2992]

That's awesome!!!

[@ddivinia]

Did you film that at the Paris airport? I bought one of these trailers - it is awesome.

[@Maxxdtrailersofficial]

Yup, we sure did!

[@ddivinia]

@@Maxxdtrailersofficial I thought it looked familiar. Loving this new trailer - it is awesome.

[@dylanforest338]

@ what price?

[@rickywhite977]

I'd like to see this trailer in an aluminum trailer

[@Jerryshaulservice]

This is niiice

[@antonioibarra7092]

Beautiful where I can buy one

[@Maxxdtrailersofficial]

What area are you in? Check our Dealer Finder and find your nearest MAXX-D Dealer: maxxdtrailers.com/find-a-maxx-d-dealer/

[@antonioibarra7092]

I called to 4 different places nobody has one Texas-California-Arizona let me know thank you I’m very interested in one

[@Maxxdtrailersofficial]

Have you tried Canady Trailers in Tulsa or Regal Trailers in Canton?

[@ddivinia]

TSI Trailers in Van Alysten Texas. Had 2 last week. I bought the black one. They had one left in stock.

[@poolguy101]

Can I tow my Aventador with this? I can't seem to find a trailer it will fit on.

[@billsmith6961]

Look at Futura for a few more bucks.

[@chrislamoureux7560]

Has MAXX-D thought about a forklift application for this trailer? Maybe 12" cross members and full knife edge? I have another brand that drops completely flat but is falling apart. Do you have any customers successfully hauling sub 10k lb forklifts with this trailer?

[@Maxxdtrailersofficial]

Hey Chris, we appreciate the feedback. The carrying capacity for the A6X is right around 6,500 lbs depending on the configuration. A full width knife edge is also optional. Only we do not build it with 12" crossmember spacing. I will be bringing this up to our engineering team!

[@edwardvargas1036]

Do you have these in a gooseneck for a 3-4 car hauler?

[@Maxxdtrailersofficial]

We have built those in the past but we are currently not building anything other than the 10k bumper pull model.

[@BCHOMEHUNTER]

Where can we buy this trailer in Western Canada?

[@Maxxdtrailersofficial]

Your best bet would be Hitch-N-Go in Rocky Mountain House, AB, or Trailer Boss in WA.

[@24khotshot77]

is the 24 foot model 24 foot from end to end or is the bed alone 24?

[@Maxxdtrailersofficial]

The 24' model means the deck of the trailer is 24' long without the tongue of the trailer, so the overall length of the trailer is about 29'.

[@Deighty181]

Is there a way to air up the bags if the compressor somehow goes out?

[@ddivinia]

I just bought one of these trailers. If you loose air etc. you back the trailer up and there are lock in rods on on both sides. Really slick trailer.

[@charlesangell_bulmtl]

@@ddiviniaThat is slick, have to find illustrations. Sounds like a good weld/fab project

[@glfmarmadison5126]

Only 80” your limited on what you can haul. I’ve got a 1981 GMC show truck and bumpers are too wide. Should have made it standard 83” wide trailer

[@Maxxdtrailersofficial]

We appreciate the feedback. Due to the design of the airbag suspension we haven't been able to widen the deck. This is something we will be working on.

[@세순버들세리탄이]

한국에 주문 되나요 차량폭 2100 나오나요 사고 싶네요 왜 한국은 이런 제품이 없을까

[@talkingcargojunkremoval]

$17,000? Yall will force a person to start slangin dope. I'd love to get one but damn, yall want an arm, leg and kidney for this trailer. Its worth every penny. In the words of Kanye West. "Wait till I get my money right". 😉😎👍🤙☝️💰💰💰

[@livnsouthflorida]

Pull up to the car show with the baddest trailer 😩😭

[@kschult12]

Price?

[@Maxxdtrailersofficial]

MSRP ranges from $17,500 to $24,000 depending on the length and options!

[@famushale8372]

Where do I. Buy one

[@Maxxdtrailersofficial]

To purchase a MAXX-D trailer, find your nearest MAXX-D Dealer on our Dealer Finder: maxxdtrailers.com/find-a-dealer/

[@jasonscales2522]

Can I get it as a two car ? Say like, 36'?

[@Maxxdtrailersofficial]

We have built a few of those in the past, but they have since been discontinued. It's a sweet trailer!