Video Bearing Load Calculations

[@muhammadusman6388]

great explained but mixed up both load at A and B bearing in excel sheet

[@manojchetty6368]

Yes, It must be other way roud

[@md.shahinurrahman747]

Hi, I think there is some wrong input in the excel cells for the load calculation. there is some mis match value with the manual calculation for both bearings. When calculating manually, load on bearing By= 300*6/3 = 600 but in the excel cell you put this for bearing Ay. So which is correct result? excel cell or manually calculated? Thanks.

[@manojchetty6368]

Consider manual Calculation, The Excel Calculation must be other way round- but it was good explanation

[@Prabh_Dhillon1993]

You mixed up wasn’t load on A 900??

[@PunjabiNavigator]

Excel sheet shows different from diagram.

[@hardinalhadi8253]

Sir, How to calculate load on bearing motor from tension belt? Thank you sir

[@riteshkumrawat7372]

different load value is showing between presentation slide & excel slide of load A and B

[@Dr.FahedAbuDhaim]

thank you very much for this video my question from where you get 300lb although the sum of tensio is 200 plus 50

[@PunjabiNavigator]

Wel. Explained. But is distance between a and b bearing is more assume 12 Then which bearing is having more load. Kindly reply

[@soujanyabagam2034]

You said that radius of the pulley doesn't effect the radial load of the bearing. However, same radius is used in calculation. and, changing the radius value changes the result. please explain.

[@alanhurdle3949]

I have a question why A and B, why can't A volcrum point not be on the other side of the force or fly wheel

[@zincfive]

Excellent video, answered a number of questions for me.

[@anup5870]

how to decide where to put the bearings i mean the spacing how much we can give how can we decide that????

[@practicalengineering6965]

please use metric

[@thebreakingwinddialoguessh7801]

No , That bearing will not be just fine, get the first one.

[@360Sebastian360]

What if the belt that goes to the motor was off to the right as opposed to below the mounted shaft? would the force from the motor still contribute to radial load in the same manner?

[@amtarelik422]

great video indeed, thank you.

[@bhagasasi425]

How to measure the load and tension

[@pw604]

Thank you very much for this video

[@basilalias6206]

Thanks for doing a great video. How does the moment calculation changes when the shaft is directly connected to a motor ?

[@adamodonoughue7874]

That's it biiiigggg SHEEESSHHHH

[@trongquangle586]

Thanks a lot

[@rvrocks1000]

It is a good video.

[@waksQam]

What if only use single bearing.. like the single swingarm motorbike which hanging the wheel only one side.. can u share how to calculate the bearing load ?

[@nhantranb.5172]

all the loads will be applied on that single bearing which means lateral deflection is great

[@kaustav43]

wHY STATIC LOAD? IT SHOULD BE DYNAMIC SINCE THE PULLEY IS ROTATING

[@jaredfullmer7043]

He probably intended this lecture to be delivered in a class where some of the students don’t have knowledge of dynamics.

[@pw604]

Superb explanation...

[@ВалерийЛохов-ч7т]

Good example, thanks a lot !!!

[@moideenyousaf3757]

great explanation, thank you

[@kedarpatil4495]

Great Concept explanation, Need more videos from you, How to calculate friction between shaft & bearing

[@asadullahkhan4412]

Hello sir, why did not you consider the fan load?

[@SM_757]

i assume for this example you wouldn’t want to account for the fan load. you want the bearings to take all of the load and not the fan itself. otherwise i think the fan would start wobbling

[@junaydlsa2840]

Great