BMW M1000R AKRAPOVIC TITANIUM 4-2-1 EVOLUTION SYSTEM fitted for TRACK DAY

[@Cartsp70]

That 3rd brake light is genius! Brilliant idea 💡 🎉

[@lansx42]

The exhaust sound waa so impressive & the add on gadgets to the rear end is very practical. Once I can get the M1000R myself .. will definitely do the same .. Thanks

[@carloscasasacosta2452]

The office looks so nice with the bike there. Beautiful machine.

[@kevinsmith5640]

Very nice. All the Akrapovic Ti systems benefit in looks by giving them a good going over with fine scotch pads, or very fine wire wool, to remove all the manufacturering marks etc before fitting. You get a consistent finish and better colouring after a good run.

[@6ix418]

Man putting on that exhaust was a pain in the ass

[@sunnycloudy1337]

thanks for including the hazards explanation with the weiser modules 👍

[@Motorcycle_Mike]

Incredible bike. Great video on the upgrades. Informative and fun 👍🏻

[@RichDunn]

Did Tom ever own up to scratching the fairing when he fitted the exhaust!

[@geneshaw1234]

Sounds really good!😀

[@PsyOps404]

Justice has been served

[@jimscott3847]

Wooooe... Sounds so good that... 👌🏍️🔥

[@ontheroad2279]

love your videos. i dont need any of theses products however very interesting to watch. you are very passionate.

[@RadDadisRad]

Dragging bodywork in a turn is a W in my book. The rear sets feel really wide to me. If your bike is jus a track bike the Pirelli Diablo Super Corsa SC2 front and SC3 rear is phenomenal.

[@TheDesroster]

Just purchased a 2024 M1000R, only 6 miles on it. On my Ducati Monster I have The Denali B6 Brake light and up front the (Amber) DRL Visibility lights mounted on both sides of the front fender. I want to duplicate this setup on the BMW, but Denali doesn't know what CAN adapter is compatible because they don't have a M1000R to tinker with. Can you help me? It looks like you have the answers I'm seeking.

[@David-bf6pl]

Did you look at the lean angle(left/right) that was recorded on your ECU for your track day? That may give you added information about the body scrapes.

[@David-bf6pl]

Is this the same exhaust that you can buy as an option from BMW when configuring the bike?

[@dennisvantland7197]

I live in the Netherlands on our track Assen the sound restrictions are very tight of 100 DB with dynamic testing. Can you do a sound check with the new headers? Do you know how many DB the bike makes? And another question: Did you remove the valves?

[@allnighterist]

Are the winglets detachable?

[@edsyphan3425]

Sounds completely sick! One question, does the deleted cat get the computer ticked off?

[@ABIKETHING]

Not sure what you mean. The bike doesn’t need remapping if that’s what you mean.

[@edsyphan3425]

@@ABIKETHING no, I was referring to check engine lights and that sort of thing. Seems like anything you change on a BMW throws some sort of code.

[@GkM1000R]

I have noticed excessive fuel consumption after putting my full systems. What could be wrong

[@쭈니-g1l]

M1000R 전용의 CanSmart 제품은 언제 나옵니까??

[@Vindaloobeast]

How did it run without a map ? I would like a pipe for my s1000rr 2023 but dont want to invalidate the warranty. The ECUs count flashes too so BMW will know even if a flash is taken off.

[@ABIKETHING]

Sounds like you need to change your dealer. Your dealer is limiting their bike sales if they’re telling you this. It’s not in their interest to enforce this when all we’re doing is removing cat and making the bike more pure. Runs extremely well.

[@Vindaloobeast]

@@ABIKETHING I get it Steve but I asked the very question before buying my bike and they basically said no. If it drops a valve or engine goes pop it would be a difficult situation. But....how much for this system fitted on an s1000rr at your office ?

[@racetechnik]

Same thing here in South Africa

[@GkM1000R]

so using your set up I can put also fog lights on my m1000r?

[@ABIKETHING]

Yes if you want to

[@adzventurerider]

M1000r is on my radar for racing. I'm 6'5", 110 kg. How did you find suspension? Any soft issues? Nice video. I have lots of questions... What is best way to ask.

[@ABIKETHING]

Suspension is great. It’s a mad bike. Shoot me an email over at abikething.

[@rlw85]

Do those db killers quieten the bike down much

[@ABIKETHING]

Yes quite a bit but still sounds good. Sorry I didn’t think about doing a sound test with the db killer in it.

[@racetechnik]

No ecu tune?

[@ABIKETHING]

Not on this bike

[@JohnCarlin-n1r]

How did you run the t3 light with the evo tech tail tidy cheers john

[@ABIKETHING]

I drilled a small hole into the metal evotech plate

[@JohnCarlin-n1r]

@@ABIKETHING could you let me know what size drill you used if possible cheers John

[@JohnCarlin-n1r]

Also how did you de pin the connector two get the wire through the hole, if you could let me know what de pinning tool you used would help a lot cheers John

[@TRexHeliPilot]

Will the visibility kit and easy can work on US Spec S1K?

[@ABIKETHING]

If your rear lights look like mine then yes it’ll all work. Feel free to email me on the website and maybe send me pic of your rear lights.

[@ondabmw3934]

The brake light dongles on their own are illegal as you must show 2x stop lamps to the rear, and with these you would have no brake lights if you had the hazzard lights on, and then even with your extra brake light, there in this case be only one light on, these will not pass the uk mot

[@ABIKETHING]

With the extra run and brake light this will pass an MOT. What bike has more than 1 run and break light when hazards are on apart from this current type of bike? Are you saying the set up I have here is not safer and clearer? I have 3 running lights of which 2 extinguish when hazards are on leaving one centre light on as a run and brake light. Indicators are sole indicators and not confused by drivers behind us.

[@ondabmw3934]

On any other bike all these are separate lights, because this setup cuts out the stop lights when the turn signals are on, there is the possibility of no stop light showing at the rear when the hazards are illuminated and that is an mot fail, if you are doing this mod then you will need the extra light,. Like a lot of mods, they are great in principal, but not exactly legal, just like the exhaust system you have just installed, I own one of these bikes and I can see what you are saying about the rear lights, I am only pointing out there is an issue with the possibility of no brake lights showing when the brakes are applied..

[@URBANAMERICANTAC]

An entire day to put exhaust on but they only a lot 3.5 hrs for replacing the recalled cams in the s1000rr. Typical

[@Dude_Virus]

The logo on the original muffler looks much better.

[@ABIKETHING]

I thought that initially….laser etched and all that but there’s something about having the true akra brand.

[@ritfloyd]

​@@ABIKETHINGthey're both "true" Akra. What you like is just preference.

[@a9503128]

There’s more bhp in the midrange with a tune and can, only 5 at the top but that’s not the full story

[@Rust_valley_adventures]

That's gonna need a tune now cat is gone , ot will only fuel correctly at top speed and every where wise it will be lean , read up on open and closed loop systems

[@LonelyTreeSunset]

It runs wide band o2 sensors and will self correct for the change. In other words, it will not run any leaner than stock. If you want to get the most from the decat headers, then a custom map is recommended, but it will not damage the motor to leave it as is.

[@ABIKETHING]

Someone has replied with the correct info already but from my own experience riding it, she’s smooth as ever. I’ve ridden bikes with full decat that needed remapping and know what it feels like without it.

[@Rust_valley_adventures]

@@ABIKETHING 😄😄😄 like I said read up on open and closed loop lamda systems, the bike is tuned with cat in place , the lambda can only adjust with the map fixed parameters in the ecu that was tuned by bmw , removing the cat will make it lean ,, that's a fact on modern closed and open loop lamda systems plus you just voided your engine warranty with bmw 👍 a engine is basically a air pump , with the cat restriction removed the bike will draw in more air, with more air the bike will need more fuel , the ecu can only adjust what it's been programmed to do with the cat in place, the ecu isn't AI lol... just go read up on it ,there's plenty of articles online explaining this . But as you think some arm chair tuner knows best on KZbin you wouldn't want advice from someone who knows a thing or two about engines and building bikes 😄😄

[@Rust_valley_adventures]

@@LonelyTreeSunset it will only fuel correctly at the highest rpm range , try reading up on open and closed loop systems using o2 lambda , lol

[@LonelyTreeSunset]

​@@Rust_valley_adventuresI'm well aware of open and closed loop systems, but you are grossly underestimating the power of the stock BMW ecu and its ability to compensate for hardware changes, e.g., cat removal, high flow air filter, etc. They are incredibly precise and will target and achieve the factory AFR without breaking a sweat. The AFR might be leaner in parts of the rev range initially but it will quickly self-correct over time (across the entire rev range) without causing damage. The proof is in the pudding, rideability and throttle feel are good metrics.

[@MrDucatiPenigaleV4s]

Change the seat it's too hard.

[@Laura-jk3cd]

Why tf u buy a bike with a +2000$ exhaust to change it after Just take it with the stock fkng exhaust and save money!!!

[@ABIKETHING]

YOLO

[@juancarlosrodriguez8381]

I would have thought that with the full exhaust the bike was going to be loud. Is not that loud taking in consideration is a liter bike. does not sound bad but not as loud as I thought it would be.

[@ABIKETHING]

It’s always hard to gauge from a video recording but I think I can relate to what you’re saying.

[@TherGoesMySocialLife]

My MR arrives 31January, quick question: Do you know if the headers will fit with the stock akrapovic slip on?

[@ABIKETHING]

As long as you buy the akra headers as a standalone product. My evolution headers won’t work with your stock akra.