What is the coating made of, do you have different compounds for different applications and heat ranges? Does the skirt length affect the effectiveness of the coating? What is the recommended variation for the coating thickness? Does the coating debris affect softer metals? Does this have thermal benefits or drawbacks not related to cylinder friction? why is figure 4A off center? Why did you cut at the end of a pertinent question? Are there metals this coating does not adhere to? Can these coating be applied with positive results to other pieces such as hydraulic lifters? Are these too many questions for a 20 min video?
@kevinwest3689Ай бұрын
They just made a video a couple of days ago that Answers some of your Question. ✌️
@Line2LineCoatings15 күн бұрын
Kyle, there are other videos in our series which may answer your questions in more detail, so we’ll briefly touch on each one here. What is the coating made of? It's a proprietary blend of polymers and lubricious filler materials. The coatings contain no PTFE. Do you have different compounds for different applications and heat ranges? Our coatings cover a broad spectrum of thickness, strength, friction properties and heat ranges, and are designed to perform in a wide range of applications. Does the skirt length affect the effectiveness of the coating? No What is the recommended variation for the coating thickness? This depends upon your specific application. On piston skirts, we like to say that our "sweet spot" is .001" - .004" radial (.002" - .008" diametric), but we can and have applied .015" or more on the diameter of a piston and achieved the desired results. Does the coating debris affect softer metals? No Does this have thermal benefits or drawbacks not related to cylinder friction? Piston rings conduct heat energy from the piston crown to the cylinder wall. While there are thermal benefits due to reduced friction and improved lubrication, APC stabilizes the piston in the bore so that the rings stay in constant contact with the cylinder wall. The improved ring seal allows heat to be transferred more efficiently. Why is figure 4A off center? We’d like to say that we were checking to see if people were paying attention, but the truth is that it just slipped through that way. Why did you cut at the end of a pertinent question? Which question? Are there metals this coating does not adhere to? None that we have worked with yet. The coatings also successfully adhere to PEEK polymer Can these coating be applied with positive results to other pieces such as hydraulic lifters? Pistons, pumps, compressors, turbo/superchargers and bearings all have shown measurable benefits using APC. We've coated lifter bores and solid lifters, but cannot coat hydraulic or roller lifters unless they are fully disassembled so that we’re only working with the lifter body. Are these too many questions for a 20 min video? No, we appreciate your interest in our coatings. Please view our other videos for additional information.
@ericwilkes23815 күн бұрын
How much does it coat
@panther1057 күн бұрын
So this abrades and then goes into the oil to go to the rest of the engine?
@Line2LineCoatings6 күн бұрын
The coating’s “fuzzy” texture is made up of thousands of tiny peaks. As the coating burnishes itself to the ideal fit during the break-in, the peaks that abrade come off in tiny particles. Most of the particles will hang suspended in the oil until the first oil change; larger particles may get trapped by the oil filter. The coating is a proprietary blend of polymers and lubricious filler materials, so the particles also function as a lubricant.