ABS WARNING LIGHT ON? FIX IT IN 3 EASY STEPS

[@2carpros]

1 Million views! Thank you all so much!

[@raulbaez8322]

2CarPros Thanks it's very good information.

[@kimberkimKC]

I don't see why anyone would click dislike. Thank you for sharing this info! Just what I need.

[@tonysamson75]

2CarPros m

[@bgtreez7361]

Sorry not sorry, but that was not three easy steps. After check fuse you lost every person who doesn't know about mechanics and that's why we come to KZbin to get three easy steps to fix something.

[@cdubboy225]

My 2015 dodge challenger is code is u1412 what do I have to do?

[@badguy7252]

Thanks not talking about nothing or how great you are for 20 minutes like all these other guys.

[@Pərfectchāøs]

BRUH FOR REAL

[@stevendegley876]

😂😂

[@erinmarick6181]

My 75 year old friend wants to give you a kiss. After all the work he did, the light came on. Thankfully I googled it and found your video. Not even a blown fuse, just resetting it cleared the lights that he was worried about.

[@2carpros]

Thanks for watching!

[@tieshajohnson3135]

Hello. After spark plug change mines came on. How do I get it reset? Please and thank you sir

[@gulfstar36]

The most common problem is magnetic trash at the wheel sensor. Very simple fix - disconnect the wheel sensor at the brake. It is nothing but a magnet that moves as a cogwheel rotates with the wheel. Spray it with brake cleaner and reinstall. You don't need to change the sensor. The magnetic particles collect on the sensor when you drive in high water or wet conditions.

[@juliehirsh1436]

Nice info as the module costs $500 and that's just the part.❤👏❤️thanks

[@rainacherienne1010]

I just know this is my issue as I drove whole day in heavy rain on a road trip and ABS and stability ESC lights came up. But I also know when I go to Hyundai they’ll come up with some hefty repair price. Unfortunately I don’t know about cars as I’m a girl so unable to follow your easy otherwise instructions. “Disconnect the wheel sensor at the brake” hmmm 🤷‍♀️

[@FishingAdventuresDubai]

​@@rainacherienne1010​ same thing happned to my nissan extrail. After draining through water logged street due to heavy rainm the abs and 4wd light came up on the cluster because the ABS sensors got debris or magnetic particles clogged on it. Or maybe it messged up the ABS motor control relay like mentioned in this video. Every since sometimes I have speedometer dropping to zero and then working again and then nit for for few minutes and then coming alive again while I also notice chnage in power and speed of the car when then speed needle drops. It all might be because of the abs sensor or wheel speed monitoring sensor getting too dirty or failed.

[@jesi.o1502]

@@rainacherienne1010 m

[@rainacherienne1010]

@@FishingAdventuresDubai Same, I drove through a flooded street. I’m at the dealership service as I type and it’s $1,700 to fix it.

[@Alex-nn6xb]

Very good informational video for the specific problem,thank you. Pretty sad people are mocking the video just because they don't have the obvious requirements you need in this type of maintenance. Neither do I but now that I have the knowledge I can safely inspect and question the mechanics who do have the equipment to use.

[@oldgeordiegeezer3086]

I mocked the video because it was crap.

[@peluchingamarra3127]

@@oldgeordiegeezer3086 or cuz you r a fkg clown

[@gnarleyric3289]

The video is being mocked because he starts the video saying it’s for everyday people, then he has wheels taken apart and a number of other skills people generally don’t really have.

[@donjohnston4215]

Great video and helpful, one small additional bit of information. Not all cars are four wheel ABS, some are only two wheel abs. it’s very helpful when you’re going to ask for a price and availability if you know what your car is equipped with.

[@nv1493]

Just info - some vehicles have the reluctor as part of the wheel bearing. In this case the new bearing has to be oriented correctly or you're back to where you started - no ABS.

[@freakyflow]

ABS light on (05 Blazer) causing a parasitc draw I cleaned the ground wire on the Rad frame And removed the butt connectors further down the line which had rust inside them ..Problem solved Saved myself from testing a module and calling myself a parts replacer

[@joediperri5636]

Lots of good info. My ABS and brake light warning are not on, but at less than 5-6 mi/hr the anti-lock kicks in making it dangerous in quick stop situation. It started as an intermittent problem but no is constant. I have quotes of up to 375.00 per spindle to repair it. I know I can do it for less than that. when I pull the fuse the ABS and brake lights come on and stay on. The question I have is... If I unplug the ABS sensor at the spindle will it effect the vehicle in any negative way

[@elliottbegay7320]

I have the same problem.. wen coming to a stop, right at 5-0 mph the truck jerks. Idk what to do..

[@gurdeepkaurgill7591]

Same problem my car ??

[@skorpion72586]

What about when you have intermittent steering issues and your calipers stick with no patterns? Nobody seems to notice a problem yet there's 0 volts going to my ABS module and a constant drag noise coming from both front rotors. I wish mine would throw a code.

[@parsingh559]

Did you ever figure it out?

[@frankclements1431]

abs is good but for many years, from the beginning,we had no abs in any car. You don't have to have it to drive. Of course abs does add a slight degree of a safety.

[@kateyare4708]

I learned to drive 50 years ago in Northern Wisconsin (think snow and ice). I hate abs - when it is slippery I have to continually remind myself not to pump the brakes if the vehicle goes into a slide. I like the solution that involves removing the fuse and putting tape over the idiot light. Easier to dismantle the abs system than to turn off my finely-honed inner abs system.

[@djflintstone2816]

Abs light is a mot failure now so it needs to be off

[@jeffmilum9001]

Excellent example of over-engineering. ABS is not needed. Period!

[@kiviKatKa]

@@jeffmilum9001 say that to a pile up on a highway and your doing 70mph and have only 40 odd meters to stop

[@jeffmilum9001]

@@kiviKatKa I have been in a situation where there were several pilots and/or I had to slam on my brakes and I didn't want gravel or some other substance to cause my ABS to kick in. In 50 years of driving I have never needed ABS I just use my brakes and my steering wheel

[@DennisVernier]

I had my rear wheel bearings replaced, now my ABS light and Brake warning lights are stuck on. It really upsets me because if it's just sensors and not actual problems with the brakes, this useless stuff could run into a lot of money. Stopping back at the repair shop after work today. I hope they can fix this problem. My check engine light has been on for weeks and I was told it was just a sensor. I'm not rich to spend a couple hundered dollars on each warning light that happens to come on because a sensor is dirty.

[@abe6517]

So what happen? Did they fix it for free? I think the guy working on it messed it up putting it back together.. 5 years ago lol.

[@fatahaac3]

Its happen to me now..after brek check using throttle and brek at same time..

[@edgarfonseca9416]

@@fatahaac3 How is that? Tell me exactly how did that light come on in your vehicle?

[@rowenareynolds5591]

Same as my car,after they put 2 tire front bearing the ABS Andthe check Engine light came on,the mechanic told me to buy a sensor, huh head ache.i did not fix the brake yet coz I don't have money......

[@patprr1756]

Its all a con .

[@farmcentralohio]

step 1, remove abs fuse step 2, store fuse in glove box step 3, place small piece of tape over abs warning light :)

[@beedee9534]

Great Esay super grant i do that sooon hic

[@0ddba1l]

Yes garage told me take bulb out and will pass MOT but had been thinking about tape as well.

[@jeffleblanc8850]

Hey that’s my way also lol abs brakes suck anyway

[@brojamessistertrise5289]

farm.central. ohio you deserve a drink. If this works for me, I need your cash app info. ✌️

[@daneneasbey4853]

How do you know what fuse to pull out?

[@billcenne7262]

On my Chevy pickup, I let it roll backwards down the driveway with the key on (not running) and hit the brakes. When I started it up, the light was out and stayed out. Play around with different sequences and see if this works on your vehicle.

[@SkillCheckk]

If this saves my truck, I’ll be so happy

[@TheMasterchief156]

Great video shows you how to diagnose and it doesn’t lead to just one problem but it shows you other factors that can cause the ABS light to come on 👏🏼

[@brucegibson818]

Try this first... My 2010 Subaru legacy 2.5i abs , flashing brake light and disabled AWD. It was the battery ground wire . I unbolted it from top of engine block and wire brushed it and the engine block. Cleaned out the threads and wire brushed the bolt threads. Hooked back up and turned key on. No lights. Been 3 months now, no problems.

[@JasonJohnson-y8s]

Just had a quick question if the back wheel is locking up and the abs is on what should I be troubleshooting

[@quinnl3520]

Great video, It was simple and easy to follow. I have one question. What does the ABS pump sound like when it is running?

[@carolinemarino1159]

😊 a

[@t.h.o.r.]

it buzzes very quietly, put your hand on it - you will feel it\

[@_koolung_9913]

actually helpful! thank you so much. my cables been eaten up and two cables were kissing each other. once i wrapped them up individually, the abs light went away!

[@livingonadollar2882]

My own tip : If it is a ABS module like the one shown Chances are the solder is cracked Or corroded You can open the lid after Carefully using a razor or thin blade to remove the rubber gasket seal. Items you will need : Solder gun pen tip. solder. Water proof/high temp chauking, Thermo paste for computers Remove the lid Heat up and remove any solder Then reapply one at a time Do not try to solder the smaller connectons as they are hard to do for people new to this Or without better tools for the job Clean any paste that was on the lid Reapply where the lip dips downwards and meet's the board Make sure your old gasket is cleanned off then apply new gasket ..install and test If it works .... You just saved $200 - $600 on buying one ... Another issue is Wiring after the ABS sensor line in the engine bay : Many car makes have wire connections with crimped butt connectors These in time do get wet and dirt And fail Find a Hanyes manual for your year and make Head to the back of the book for diagrams on electronics under ABS And you will find the color of the wires And where they go

[@jeezursilly5252]

I'm not a car person, so thank you... but I didn't understand a word of this.

[@livingonadollar2882]

@@jeezursilly5252 Well thats's a fix too Pay a mechanic to fix your issue

[@arriva1237]

Seriously!!!🙄

[@abe6517]

Makes prefect sense to fixing the control box instead of replacing it.

[@100GTAGUY]

@@jeezursilly5252 it's not necessarily just car related, but useful when it comes to basic or advanced electricity.

[@alaaeldinsaadaliismail5722]

thanks for the video, if the diagnostic is reading changes in 3 out of the 4 wheels except one which is stuck on a fixed number. I changed the wheel sensor and still . this happened after a hit to the right front side of the car what could it be?

[@Luminaring]

broken wire?

[@parsingh559]

Wheel bearing

[@wyattribarich6300]

Reasonable, quick overview of ABS, without great detail. Thanks

[@trvman1]

So basically if the fuse isn't blown it's going to go to a repair shop. Sure hope people have found an HONEST one or they are going to tell you it's the most expensive fix, even if it's not. Here in the south, no snow and drive carefully in the rain, no need for ABS system. Remember we drove without these for 70 years at least. Mine just went off at 10,438 miles on a car that is 5 years old.

[@joshuaschuettenhelm2596]

Very helpful! Where I live in Texas, an abs light makes a vehicle fail the annual inspection and you can't get it registered.

[@frankgonzalez24]

I'm a licensed Texas safety and emissions inspector and can tell you a lit abs light will not cause your vehicle to fail an inspection. Whoever told you that is full of shit. Code 4.20.11 line q of the TXDPS inspection code says "Anti-lock (ABS) lamp on signal which is on or comes on during test will not be cause for rejection." Basically Abs is an add on to the service (regular) brakes and as long as there's nothing wrong with the service brakes, the vehicle will pass the brake portion of the inspection.

[@JL-iu7fk]

@@frankgonzalez24 If I slam on breaks a couple of times in my 96 Blazer less than 50k miles and if you have a friend that does inspections ask them if they can use another vehicle to pass the inspection.

[@rebbeccadeering9970]

@@frankgonzalez24 Thank you for citing the regulations. (I confirmed it with a simple Google search.) I just got rejected today because of the ABS light. I'll try that again.

[@sunshine3914]

@@frankgonzalez24So, basically it’s just emissions & tires that the vehicle has to pass?

[@Flowerchild778]

​@@sunshine3914blinkers and license plate light too, where I live

[@1fitaintbrokefixit]

Many older rear wheel drive vehicles have a single abs sensor located on the differential housing using 3 sensors total.

[@gmax341]

I can confirm this on my 1996 vehicle.

[@ronhill5964]

Will sticking brakes cause abs and vdc lights. My 350z will suddenly (in drive) shift into low gear and come to a sudden stop when I let go the gas paddle. I can take my foot and lift the brake paddle and all seems normal. I can drive a few as long as I dont touch the brakes.

[@dannav1635]

very useful thanks. my ABS light and parking brake light turn on while I am driving then if I park turn car off then car on again neither light will go on...help !

[@jorjisam9051]

check ur brake fluid

[@dannav1635]

Jorji Sam thanks I'll do that...

[@skip6148]

Jorji Sam I am having the same issue the fluid is full replaced all the breaks and checked the sensors tried your trick and lights still go on.

[@harryestrada7727]

2013 hyunori car accent trouble dicc brakes how to ajust

[@lightning5702]

So how did you solve it, please share

[@sarahblackwell7840]

I wanted to add that it could be your brake switch as well. My brake lights worked normal however my abs light was on. It actually turned on and off for awhile. But eventually stayed on and wouldnt turn off. I did have a code for brake switch light. I changed it out and my abs light turned off.

[@everardocamacho5063]

Great video, one question, all the abs sensors are check in ac current? Or there are others types of sensors that are check in dc current? Please let me know, thank you and cheers from Ontario ca,

[@davidcoleman9304]

Another problem could be GROUNDING cables between the battery, and body, to engine, points. On Ford products these cables become corroded, or rusty. This causes poor grounding. Many other Ford vehicles have similar problems. Their bare metal woven ground cables corrode to the point of breaking. On my 2008 MKZ the Check Brake System light would come on as I drove out of my driveway. I checked fuses, and other pieces. Upon inspection of the two cables, one from battery, to shock tower, and another cable from engine , to the other shock tower were dirty, and loose. Using a jumper wire from the engine to shock tower mount, the problem was solved. Later , replacing the small bolts that attach the cables, to the body, and tapping the holes for, slightly larger, bolts, assured a much better connection.

[@hotrodray6802]

After restoring the ground connections paint them with liquid electrical tape to seal out all moisture and air.👍👍

[@LPCLASSICAL]

I have a B7 vw passat. 2 rear wheels not returning speeds. I have had to pull the abs fuse to disable the abs as the offside right front abs is activating at moderately low brake pressure. The rear abs rings and sensors check out ok.

[@BigHeadClan]

Just had this issue after bleeding my brakes my wheels were rusted to the wheel hub so I assume I knocked loose a sensor. Thanks for the upload will check these out when I get home!

[@terrycloud6437]

Well, how did that play out for you??

[@brianharrold8542]

2006 suburban with stablitrak light on abs and brake light on also but brake fluid was full noticed charging system was 14 amps with air conditioning on

[@johnhodg8400]

will the light on the dash still light up on the dash with the fuse pulled? Never mind I'm gonna go do it and see for myself, but thanks anyways , I couldn't wait for an answer. Keep up the videos.

[@jtdundee]

Heck, let us know if it worked!

[@TheFlyingZulu]

With the ABS fuse pulled there should be no power going to the ABS system... The car's computer should detect this as a problem and the ABS light should still come on.

[@Yukonjackman1]

How about a video on resolder poor joints on a circuit board when no replacement part is available

[@abautomotivetransmissions2970]

Love these guys! I use them at least once a month and they have yet to fail me!!

[@2carpros]

Thanks for watching!

[@jonesvaughn8946]

I need help because none of the stuff mentioned in this video was the reason that my ABS light came on my light came on because I mistakenly took the ABS fuse out of the fuse box and immediately put it back in and afterwards my light came on and hasn't went off?

[@frankgonzalez24]

By some of the responses on here, it looks like those three easy steps aren't so easy for those who have zero mechanical know how.

[@Smegma_pirate]

Frank Gonzalez don’t be a dummy get a 5 dollar test light and a 10 dollar multimeter ...

[@lilchina6145]

Frank Gonzalez he LOST ME ON THIS PART

[@gerardoespinoza2741]

It is no one's fault that you do not know anything about mechanics. Take the car to a shop then.

[@billchambers1119]

Fully agree

[@markkouros6628]

@@Smegma_pirate where do you test with a multimeter ED Falcon 94 model

[@jamesbailey7785]

Good vid! If you have time i have question. My 2005 Dod Grand Caravan has had ABS light on for a few years. Don't ask bout inspections:))) I finally need to fix this. Cost of guessing mount up fffast. I sent to Garage to scan looking for a direction as I had checked sensors and (rings), with no visible issues. They said pump ABS would not power, no codes for sensors. I removed battery and checked for power to plug on Module. 12 v and good ground to both heavy wired connectors. Top 2 positive, lower 2 ground I did the ohm check on all sensors they checked ok. Have power to plus side of connectors (close to each sensor). However i tried the connect sensor pins to meter set to A/C, spinning tire I get no current detected on any sensors. What I did not check while I had module plug off was pin 7 left side (holding the plug as it fits) is supposed to be powered as well. I guess i need to get up and close to wiring diagram. Any help/advice would be greatly appreciated. Best; Tom

[@1976kjell]

Great guide. I have a 87 Ford Scorpio (Granada mk3) and these days a lot of the suspesnion parts will be replaced. Like brake discs, pads and wheel bearings. The ABS light comes on periodically, often its off at idle and comes on when reacing a certain speed. Any tips what could be wrong? Ill will probably check each sensor the way that is shown in the video, but first Ill check the fuse.

[@dlmanolo437]

how many sensors are there?...and how do you determine which one has the issue, if possible??...my ABS light goes on and off randomly...will motor vehicles department pick up that problem in an inspection?

[@2carpros]

Most likely yes. Depending where you live and the laws governing vehicles, they will pick up the warning during a smog check or a safety check.

[@peterghai2466]

I have engine light and brake light and esp light on with 4wd light on my Jeep Patriot.. My mechanic is on holidays and is coming back next week. Am not driving my car. Any suggestions.

[@peterghai2466]

Thanks.

[@RcH382]

get a horse

[@brandonpaust7980]

Sensors!

[@Moonstorms]

I just decided to check my air pressure wow the tyres were a bit low and the light went back off on the anti-skid after I drove it for a couple of minutes…

[@MURRYCHOOCK]

And how could you do all this at home? I would prefer to get the OBD error code first

[@logan5326]

MURRYCHOOCK ...yes, you can use that (OBD scanner) but those warning lights will eventually come back. You should also check the “Switch Stop Lamp” sensor (sometimes located on top of the pedals area).

[@zainabmcgaughy1147]

Test light checks fuses.when light comes on is it bad or good

[@maingun07]

_"When this light is on, it means the system is disabled"_ Not true. My ABS warning lamp is on and yet the ABS works just fine. I've tested it on a dirt road. The brakes pulse just like they should and the car pulls straight. The only thing I can think of is a short in the lamp wiring. Any other reason the lamp would be on? If it is a short, is there any common places this would happen? I'm not looking forward to completely disassembling the dash in a '93 Caprice just to get the stupid light to go out.

[@redenora7840]

Wrong bro if your abs the light is on it means your brake is not properly working, the cause sometimes your brake should not open proper or maybe if you apply your it could be dragging, or going on other side try to figure it bro 100%

[@choppy7111]

If air get in the brakes will that make the abs light come on

[@user-tr3kf9hs6g]

Looks like I'm Not alone in the ABS light thing. I've had this thing for almost 10 yrs changed wheel bearing its 4x4 & light came off after all was put back together & drives & sounds Great I don't get it.

[@sherifmansour9154]

hi I have a ML55 AMG , While driving normally or on a bumpy road the EPS, ABS, BAS, Brake light come on with beeping sound. the steering feel a little tighter and the beeping sound stay on until I park the car and turn off the car. after turn of the car and restart it's work fin

[@ivegotelvis3577]

This problem can be a pain and expensive to fix,some cars have metal cased wheel sensors that mount into alloy or steel hubs and after a while are impossible to remove without breaking them,plus if the pump is at fault the cost of the pump can be more than the value of certain ageing cars.I can tell you after 50 years in the motor trade that this is seldom a simple or cheap fix.

[@davidbaran6393]

Tik l

[@abe6517]

Tape on the light is the best way to go!

[@tomc8157]

But still cheaper than a new car..

[@colintinker7778]

What about hall effect abs sensors? Your test won't find these. Also, some cars have magnetised wheel bearings, so nothing visible at the hub to check.

[@abe6517]

Ohhh snaps!

[@oibal60]

My ABS ABD light would come on after driving about 20 feet, in either forward or reverse. Turns out it was the relay (one of two) in the trunk on the pax side. The one closest to the gas tank was the culprit.

[@raybin2086]

The scanner doesnt communicate for abs codes and it is the right scanner for a 98 astro 2wd. Any suggestions?

[@eddiecox9370]

Very good information, after reading through some of the comments I realized there are some really stupid people out there, you made it so easy to check and you have people talk about how hard it is, but then when you look at most of the politicians that keep getting voted in office time and time again you start to realize that stupid really runs deep. Good day sir

[@2carpros]

You are not wrong. Thank you so much for watching and commenting!

[@hiltonlee7672]

What about the break switch faulty on some cars.

[@Techybyker]

Thanks for this video. Very helpful. I found the issue with my pickup truck ABS warning, one of the wire speed sensors was chewed by our dog. Reconnected it, the light turned off and the ABS itself is working again.

[@LadiesLoveCoolTay]

@Predator Plus more like a rat chewed it

[@jonathanmimnagh8956]

My Jeep just failed its annual inspection on ABS, with a broken cable to the sensor broken. Jeep wanted $a lot and currently not in stock if they can get one at all. A breaker is getting one to me tomorrow for $ less than 100. Then back to the shop, I need to replace a front marker light bulb and headlight bulb too, but I've already got them.

[@w9x7cv3vg6]

well i would give a like if the video was about what i was searchin for ,a 1996 impala SS abs light comes on but resets when system is off and comes on again if i travel ahead at 100 feet or more..i need a diagram

[@hiseminencetheholymacdiarmada]

My ABS/Traction control light comes on and goes out intermittently

[@vickyda2]

Chick the brake fluid

[@michaelsharp341]

On my 2001 Pontiac Grand Prix gt my abs light comes on when I turn my wheel to the right.but when the light doesn't come on my abs works great.any ideas what it could be

[@ericsandrin8123]

wire broken where it enters wheel sensor...replace harness commonon GM..these people should be shot for this ..$99 for a piece of wire..

[@annd.h.1336]

Hi, I have a 2011 jeep liberty, ABS LITE, 4 wheel drive, and traction control lite came on at the same time, wheel speed sensor changed, mechanic spent hours trying to diagnose this, at the shop for 2 days, could not find the reason

[@triple466]

Ann D.H. Hey did u ever find the reason? Please tell me i don’t know

[@1marktran]

I have the same problem

[@Flowerchild778]

My accelerator pedal causes mine to go into limp mode. I use a code reader to clear it until I can get it fixed properly

[@infamous387]

What about brakes pumping on me while trying to brake and then the abs light comes on? Already had my brakes bled twice. Already had new brakes new brake caliber and rotar replaced. Now my bearing is going bad and will be changing that soon as possible.

[@hometheaterguy2065]

I like that clear Snap-On test light.

[@2carpros]

It is my favorite test light! Thank you for watching!

[@blissweb]

1. I just got a quote for this where they quoted for replacing the entire hub assembly on both rear wheels. Would this ever be necessary ??? 2. If I buy 2 new sensors online and replace them myself, will the warning lights automatically go off ?? or would I need a diagnostic tool to reset them ??

[@blissweb]

WhyTrumpQuestions thanks for the answers. I've since done a bit more research and the Getz model I have has hub assemblies which include the built in abs sensor so you can't just buy the sensor. I will check the fuses and connections and if all else fails order the two hubs online and get a mechanic to fit them. Thanks again.

[@mrbreezeet1]

Usually they will go off by themselves after replacing the hub/ hub assembly.

[@jeffleblanc8850]

Mines on all the time pulled fuse hate abs brakes I can’t stand them

[@PaulAntonescu]

Hey, great video - very explanatory. Could I get out of the way the ABS module failure since my ABS light only goes on after I increase the car's speed beyond, let's say 15mph? Basically when I start the ABS lights are off. The car is BMW E91n 208 320d. I have to mention that I cleaned the rear left and right sensors and after the cleaning the ABS light was off before the speed increase, before the cleaning the light was always on. Also the ECU errors for ABS are: 5DB2 and 5D90. Thank you!

[@lts30000]

I'm a newbie but clean the ring the sensor reads from.

[@OneLove-ik8kh]

Could low braking fluid cause an ABS light to turn on? It’s a bit lower than that max level.

[@wolveric0]

It can cause your "Brake" light to turn on, do not complete the lost fluid until you check you brake pad, if they are wear off change them that should raise your brake fluid level, if they are not you have a leak and you should get some one to check your brake system.

[@johnwinstead7740]

Ppl

[@johnconrad1062]

@@johnwinstead7740 no hi by hi

[@rogerdixon8762]

No mention of bleeding the hydraulic system?

[@thomasbergman7146]

my lites been on 12 months ..my ck engine been on longer than that.someday iwill have to get my 20 year old Malibu inspected.

[@johnkozlowski7642]

Where is that modular located on 2006ChevroletSilverado HD4x4?

[@Flowerchild778]

Don't you love it when they answer comments??

[@masterartist1025]

Thank You, I subscribed! I changed the fuse, and will drive it in my driveway to check it.

[@2carpros]

Thank you so much for watching!

[@sonny2435]

'NOT picking on such a high quality VID-- @2:22 it says AC setting, not DC-- why would it be AC on anything in a car ? please clarify if you will

[@gpulis]

A magnet moving within a coil creates a voltage. Positive one direction and negative in the other. AC. I would have thought more of a square wave and frequency would occur but I'm not that familiar with the component. But I do know a short is 0 Ohms and an open is infinite Ohms. Not sure why he worded that part like that.

[@lopezalexis73]

I changed the front right hub on my 2009 Kia Sedona and after doing so the ABS and ESC light came on. Any idea of what may have caused that. I changed the sensor and no luck.

[@edsmith6504]

People only come to sites to whine about their problems, but they NEVER respond to let us all know what the problem was in the end.

[@raygunrunner]

The space between the senor

[@marijojohnson6587]

I have read where someone put the old sensor back on since the new one wasn't working on new hub . I will try this myself as I am having abs and traction control lights come on after rwplacing fronnt hubs thay came with new sensors. Give that a try.

[@khumacharya5830]

Sir..in my car it abs was light was glowing for few mins...then once I switched off the car n again on my car...the abs light was not on then....wat is that issue...

[@clydemassaro722]

I hope it is as easy as you make it look. Thank you.

[@louiscypher1001]

man I hate using mulit meters.. I'm not confident with those..

[@0ddba1l]

I have a 2012 Smart 451 and it has an intermittent ABS light that only comes on in the wet any idea what the fault could be? The sender has been changed and reluctor rings look ok, car has been doing this for at least 4 years just to rear left wheel.

[@richardmorgan7246]

Water getting into one of the connectors down there it sounds like. Try taping up connectors to stop water getting in.

[@0ddba1l]

@@richardmorgan7246 Got fed up with it can drive it in what ever state it is so took dash apart and put black tape over bulb now passes MOT's easy.

[@mike856ms]

Although this was a very detailed video. Steps 2&3 are not EASY fixes for the every day driver. Thanks for the video.

[@chadparker9823]

I received a computer from a junkyard to fix a no start and transmission safety mode issue on my 2002 Dodge Dakota. I gave a jump start and it all started. I was able to make it home in 1st gear before the truck stopped starting. The junkyard computer worked for the starting and transmission, but now displays an audible and light alarm for the ABS. I drove the truck and stomped the brakes several times and noticed that the ABS system was working correctly. No skids. Help

[@bonkeydollocks1879]

Great simple straightforward advice 👍

[@fecklarjenkins2549]

Both my rear sensors read 1750 ohms will that cause lights. 02 grand marquis

[@mariocarranza3976]

do u have to bleed brakes after replacing abs module

[@2carpros]

No you do not

[@raygunrunner]

Mario Carranza only if you open the brake lines

[@dronesandmore1977]

...and you won't need to open the brake lines to replace the sensor. So definitely no.

[@aregaayalew215]

Sorry my dear I have question about ABS system is it related or designed with KM kilometer contour I have 2015 Toyota land cruise

[@2carpros]

That is a complicated question that I can't answer on KZbin due to me needing to post pictures and wiring diagrams. Head over to our website www.2CarPros.com ask a question and an automotive expert will be along shortly to help you. Thanks for watching!

[@deplorableb.r.4211]

That music is groovin'. Couldn't focus on repairing my car.

[@timd5597]

I broke my speed sensor when changing wheel hub assembly. Now my dash is all lit up, is it okay to drive car until sensor comes in? I know abs will not work.

[@allenclark8789]

Can a speed sensor cause the brake light to come on ad off? Dodge Charger 2015

[@robertmaybeth3434]

ABS is nothing but icing on the cake and 99.9% of drivers will never need it. I have known the ABS to cause hella accidents when people changed a bunch of stuff (that they shouldnt have changed - one guy i knew just had to have a higher rear end ratio in his Dodge truck, and this totally botched the ABS!) I drove, my parents drove, your parents drove, your GRANDparents drove without ABS! To me its more junk to go wrong and cost you all your savings! Keep your speed down in pouring rain and you'll never need it. Not that ABS is not a good thing but look back and ask yourself HOW MANY TIMES have you locked up the wheels during braking? Chances are the answers zero, whether you drove ABS or not!

[@pameladavies8205]

Robert Maybeth k

[@hicoteo]

I have a 2011 Suzuki Vitara and the ESP & ABS lights have been coming on and going out. Now they pretty much just stay on. I took the car in and the dealer says it needs a new ABS Module. It costs about $1400 but they don’t have one at the moment. They said I can drive it but the ABS is not working. What are the chances of fixing the module? Could it be that it is just dirty? Should I try taking it apart and see if something is just jammed? What advice do you have?

[@jimpepper1]

as lot of abs modules can be repaired , see autoxpresstech.com

[@Flowerchild778]

​@@jimpepper1 maybe pull-a-part and pull one from salvage vehicle

[@Flowerchild778]

Do you have salvage yards where you live?

[@hicoteo]

@@Flowerchild778 I've learned to live with my Christmas lights dashboard. Sometimes they're off, most of the time they are on. On a slippery road I thought I felt the ABS. I think everything is working except the lights. These lights seem to be a common problem with Suzuki.

[@KillerKev1961]

And that component costs ONE MILLION DOLLARS!

[@jpruda65]

When testing the fuse with the test light, does the ignition have to be on and does somebody need to depress the brakes while the other person is testing the fuse?????

[@paulsawczyc5019]

An open circuit will read infinite ohms on the ohmmeter not no ohms.

[@andyg817]

What about a very soft tyre ?? I Had it on mine, put abs light on...

[@kennethwhite7243]

Thank you for posting exactly what I needed to know

[@2carpros]

Thanks for watching!

[@georgemarcos8688]

I believe that using OBD scanner is much easier and more safe than these steps otherwise visiting the mechanic. I don't recommend for any car owners without professional background to do the ABS sensor testing. Thanks for the video because I can't deny that you provided useful information and ideas.

[@davidpeters2201]

What type of special training do you need to follow the simple steps in this video? If you're worried about backyard mechanics then your worries are wasted, you should be worried about the person beside you ordering dinner on the phone while meeting their side piece before they get home!

[@abe6517]

Kearns... sheese..

[@abe6517]

@@davidpeters2201 working on cars is dangerous. Fixing things on your own is dangerous, posting videos on yourtube am dangerous, Snowflakes definitely dangerous, and trying to help someone who probably couldn't change a tire RIP

[@davidpeters2201]

@@abe6517 everything nowadays is dangerous according to someone so live a little while you can. Save some money while you're at it

[@paulmoffat9306]

And cars operated for almost a century without that gadget, perfectly well when the operator knew what they were doing (No facebook or texting).

[@gelisob]

Yes, perfectly well. Let us just ignore all those who died and to whom it did not end up perfectly well at all. And lets just ignore all those who were saved due to having ABS brakes. And why stop there, cars operated for almost a century without seatbelt gadgets too :) and so on ..

[@suharnohci649]

My problem is ,code uo 121or,lost komunication with ABS modul,how to vix it.thank you

[@1fitaintbrokefixit]

if you can't drive a car without abs you shouldn't be licensed

[@TheFarmerfitz]

George Marinos I agree... However if it is a wheel bearing problem turning on the light... You might wanna get that checked out...

[@1fitaintbrokefixit]

good point

[@cannabiscountry4171]

driving isnt usually the issue, its passing inspection.

[@johndoe6047]

Cannabis Country definitely because you cant sell the car hell ive had a work car i wish i could just sell it

[@QPham-nz5po]

my abs wheel sensor is out so my car pulls to the right now because abs pump isn't functioning...otherwise I wouldn't care

[@bornfacesimbuwa902]

Well explained. But can you explain on heavy duty trucks, say like Volvo fh12_fh13

[@geojimz]

I’m have an issue with my ABS light turning on randomly and I have zero knowledge on working on cars. This video made my head hurt.

[@tinavorakoumane7312]

How to fix car prilur abs and brake

[@itreallyisntpersonalb1960]

The question I have is the ABS light is on the car will still stop but it'll feel like something's grinding. Someone told me it could be the speed sensor that's on the back wheel indicated by the reading of the code. I brought it to two mechanics and out of the two they have different opinions. So I don't know what to do at this point I can drive I have been driving before abs was introduced. However I believe if it's needed that I got to get it fixed can you give some helpful advice

[@abe6517]

Sounds like brakes grinding or maybe bent dust plate. Hit any curbs or holes?

[@itreallyisntpersonalb1960]

@@abe6517 actually no it was not the plates what it was was exactly what I thought it was the speed sensor in the back connected to the brake. Got it fixed didn't cost very much I'm on my way again

[@shifty2755]

my abs has stopped working on my boat.

[@danoakley6538]

Lol

[@bagheofminhrau]

Ship it to me, I'll pay $99.00, you pay for shipping.

[@frankgonzalez24]

RUBBER UNDIES that's because didn't flush out your abs unit when you went from fresh water to salt water.

[@exhalejackie]

try the anchor

[@firstlast-cx8xq]

RUBBER UNDIES Did you follow the 3 east steps exactly. If you didn't, there's your problem.

[@ДаниелСпасовски-ъ4к]

I measure 3kohm on all my fiat punto mk2 1.2 8v 2004 year car abs sensors, and no voltage when i spin the wheel, could the sensors cause abs light turn on and my abs not working ?

[@mark97213]

Nice tutorial. Looks fairly simple.

[@2carpros]

Thank you for watching!