I blew up my 98cc the other day and this convinced me to get a 212, great video guys cant wait to get one and start riding again!
@cxllpzjohnson2 ай бұрын
i just did the same exact thing and went to harbor freight the same day and now i have a 212 in my room
@GLEECED Жыл бұрын
Aye you guys were the video I’m really looking for everyone else just rushes through and don’t really explain how to get it done you guys did , thanks you 🤙🏽
@user-dj1xp4tq3e2 ай бұрын
10 months and the same engine is now $150... ridiculous
@B4N4N4-1DK2 ай бұрын
Fr
@1500hondaman2 ай бұрын
Yup I just bought one the other day lol. Still not a bad deal I feel like
@Maxim_Fedorov_Ай бұрын
I’m buying one today
@zacthecrazybestАй бұрын
About 200$ on Amazon right now
@Maxim_Fedorov_Ай бұрын
@@zacthecrazybest 150 at harbor freight and also I got a 20% discount 😂
@NavigatorGSX1300BK6 ай бұрын
I built the same bike with a 212 torque converter custom motor mount for clearance 420 chains suspension forks and hydraulic brakes. Bad ass ride that pops Willys on command.
@bucketman51383 ай бұрын
sheesh
@jamesa62725 ай бұрын
I needed a longer chain / 5/16 -24 bolts Had to shave down the plate for the jackshaft and a bushing for the shaft I had to make to space the clutch from the engine for a Baja mb165.
@user-ms7uf1pz4n6 ай бұрын
what kind of throttle cable do i need for the carb?
@DakotaMills5 күн бұрын
You can buy a mounting plate to make it fit in the middle instead of the right side
@tylerhuffmyer5058Ай бұрын
What size screw did you use to screw on the clutch?
@jarredhall9555Ай бұрын
I laughed at the light I did all of this with the kids when they got them for Christmas
@arctic9752 ай бұрын
Where did you zip tie to make the top speed better? It was hard to see
@StoryWavez4 ай бұрын
Can u make a video of zip tieing the governor tysm
@buckpotter31849 ай бұрын
❤ Buck Potter KZbin channel we love turning mini bikes into three wheelers we love your show
@jakeandcameron70228 ай бұрын
Ok I’ll check it out 😁
@buckpotter31848 ай бұрын
You know bro we be trying
@jmorris9998 ай бұрын
I didn't see you do it but there is a throttle restrictor screw on the carb. You need to back that out. If you did do that and I missed it sorry. Otherwise looks like fun, I did the same thing on my CT100U and wow! It goes!! I can hit 45+ on a good stretch of road.
@isaakm40746 ай бұрын
10:44 is when they cover pulling the screw but thanks for the heads up!
@mbrrideitlikeyoustoleit843626 күн бұрын
@@isaakm4074he’s not talking about the screw that loosens up the throttle that’s what he did a 10:44 but there’s another screw that only lets the throttle open half way.
@mbrrideitlikeyoustoleit843626 күн бұрын
He’s definitely not getting full throttle
@jmorris99924 күн бұрын
@@isaakm4074 I went back and looked at the video, they definitely do not remove the throttle restrictor screw.
@jmorris99924 күн бұрын
@@mbrrideitlikeyoustoleit8436 Yeah the restrictor screw is still in is why
@A_FlacoАй бұрын
what clutch would i get?
@spark_monsterАй бұрын
Hey! great video, super helpful as i’m thinking of getting one of these and swapping a 212 into it. would you be able to change the description and link that clutch? i can find the right one in amazon so that would be really helpful. thanks and ride safe bro🤘
@jakeandcameron7022Ай бұрын
Ok I just added the link to the clutch that should work.
@spark_monsterАй бұрын
@@jakeandcameron7022 Thanks bro!
@Hesham2008A Жыл бұрын
Awesome!! Getting my 212 soon! Do you know the size of the bolts to boot in the engine? I wanna see if I can find em off Amazon sense I’m ordering most of my appliances from there
@jakeandcameron7022 Жыл бұрын
I think there were m8 bolts that were about 2 inches long
@jakeandcameron7022 Жыл бұрын
Not super sure though
@Hesham2008A Жыл бұрын
@@jakeandcameron7022 it’s alright no issue. I found bolts on Amazon, I’m hoping it’s good
@ShadowJack448811 ай бұрын
Did you get your engine yet? Hope so brother! Let us know how it turns out❤
@Hesham2008A11 ай бұрын
@@ShadowJack4488 getting it in 2 weeks, by then Ill get the extra 50 bucks I need to do it. Thankfully I already have enough for all the other mods I wanna put on it!!
@thegromblerdiecast2 ай бұрын
Im about to put a 212 predator in my mini bike. Do I need a engine mounting plate? Whats the benefits of having one? What happens if I dont have one? Any tips are appreciated!
@jakeandcameron70222 ай бұрын
Well on the bike in the video the holes on the motor baseplate just lined up with the holes on the frame but I’m not sure what your minibike frame looks like so your just gonna need to buy a motor and see if it fits and if it doesn’t you can just drill new holes in your frame assuming it doesn’t compromise the frame.
@thegromblerdiecast2 ай бұрын
@@jakeandcameron7022 Thank you guys for responding and doing it so fast haha. I just got a 212 and will see if it fits later today.
@louxtu6 ай бұрын
Do you need a new clutch? Or can you take the one off your stock one
@jakeandcameron70226 ай бұрын
Yes the stock clutch uses a 5/8th drive shaft out of the motor and the predator uses a 3/4 in shaft so you will need to buy a different clutch
@justincase35653 ай бұрын
Should flip the clutch and drill new motor mount holes so it doesn't hang off the side
@serviceproper4 ай бұрын
Hey where did you get the clutch? And how'd you get the key off?
@jakeandcameron70224 ай бұрын
Ordered the clutch off amazon and just knocked the key out with a hammer and punch
@critterbug1328 ай бұрын
Did it come with the motor mount bolts
@jakeandcameron70228 ай бұрын
No we bought some hardware
@Trains_n_stuff089 ай бұрын
Take off Coleman sprocket and chain there junk and I had problems after my swap
@johnfontenot50153 ай бұрын
Are this engines wet or dry clutch?
@jakeandcameron70223 ай бұрын
Dry
@bslmarketing4 ай бұрын
link to the clutch?????
@jakeandcameron70224 ай бұрын
Don’t have a link anymore but there are a ton of options on Amazon that are all basically identical
@jettsieger29109 ай бұрын
Does this only work on a cc100x?
@jakeandcameron70229 ай бұрын
That’s the frame we had specifically but basically any minibike will be very similar in layout so as long as the frame has a big enough opening you should be able to swap no problem
@jmorris9998 ай бұрын
I did it on my CT100U but had to relocate the gas tank.
@arctic9752 ай бұрын
@@jmorris999did you need to do anything with the chain? Since there is a bolt at the bottom preventing it from going all the way forward?
@user-qc7yh6iz4l3 ай бұрын
We’re the clutch from 😊
@jakeandcameron70223 ай бұрын
Ordered off amazon
@TayMoneymangamingАй бұрын
why not take the governor off?
@jakeandcameron7022Ай бұрын
To completely remove it you have to open the case And we thought that was too much work for too similar of a result
@jaysono34062 ай бұрын
Oh, my 99 cc goes 45 mph. I was thinking about getting a 212. I’m not sure anymore. maybe they’re just fat.
@jakeandcameron70222 ай бұрын
Yeah the 212 wasn’t as impressive as I thought with the top speed, I think that really came down to the fact we didn’t change the sprockets and could’ve gotten a lot more speed with a re gear but the torque that we got was awesome. We couldn’t go uphill with the 99cc but we’re both 200lb dudes
@naturechanel2096 ай бұрын
Need to regear it get a smaller rear sprocket
@jakeandcameron70226 ай бұрын
Your probably right, it was very torquey and didn’t have the top end we expected
@v8consumptionАй бұрын
I get 40mph on my 4hp minibike
@PARKERJ3963 ай бұрын
-5:42
@jacobskutca62875 ай бұрын
Has anybody run into the problem where the motor just doesn’t start at all? I’ve installed it on my bike, put gas in, it’s got oil and the power switch is on. I’m going crazy trying to figure out what’s going on
@jakeandcameron70225 ай бұрын
Make sure the air filter does not have any plastic cover or something blocking the air box, also make sure the coil is connected to the plug
@jakeandcameron70225 ай бұрын
But other than that you might just have a dud :/
@jacobskutca62875 ай бұрын
@@jakeandcameron7022 I’ll have to double check but I’m almost certain those are both good to go, I took out the filter completely and it didn’t start
@DailyCoolClips115 ай бұрын
@@jacobskutca6287try buying a new spark plug
@Dirt-xq6yr4 ай бұрын
There’s a kill wire infront of the motor that I have to take out every time I want to start mine
@3amMizify-TWITCHАй бұрын
Hi can we talk if you see this message as soon as possible
@jakeandcameron7022Ай бұрын
What’s up?
@SecondSunofficial2 ай бұрын
nice video but man, blow your nose lol also its not a guide if youre skipping the throttle part which is what most people have issue setting up