ABUS Detecto 8008 - UNBOXING

[@yoni207]

Does this lock fit the Honda Transalp XL750 disc?

[@YaboyCurtis_]

A grinder will cut through the disc in 30 seconds and remove this lock , there are $70 locks that will do just as good as this and you will save $130 for another lock, the more locks the better.

[@Jerrybasel]

This is a interessting point. 2 locks but not the priciest. Do you use more than one lock?

[@YaboyCurtis_]

Jerrybasel 2 locks on the front disc on either side of the break calliper and do the same to the back disc so the bike can’t move even an inch backwards or forwards, or if you have holes in your sprocket that’s a good place to put a lock and don’t go for locks with the push down pins unless it is double locking like a xena xx14, the best locks available at the moment are detecto 8077, Oxford boss alarm disc lock, Victory x plus 68, abus granit quick, detecto 8008, xena xx14, abus granit power xs 67

[@addicted2baseballrgd21]

How about a one year review on this product. You still happy with it?

[@blacksunlori]

I just purchased this, the cardboard looks different, the key has a white light, not blue. Maybe the ones made for exporting to the USA are different... I have no idea...

[@marekhaberko2566]

Unfortunately Detyecto 8008 doesnt fit Yamaha XSR 125 !!

[@emmanueltruchet9719]

Hello I'm from france, i would like too purchase a detecto 8008 after a 8000. I would like you to tell how large is the 8008, because i think it is wider as the 8000. No shop in the area has this lock in stock. Thanks for your answer.

[@lazardjurovic2883]

Do you recommend this disc lock? What about alarm? How sensitive is it?

[@Jack-eo1nr]

What's up with that card with the keys? Do u need to bring the card with you?

[@bloodymarvelous4790]

The card is for ordering additional keys. Keep that in a safe place at home.

[@lorenzospa1975]

The maximum thickness of the disc?

[@najimh5348]

Does it fit for cbr500r 2016 model? thanks

[@JCCamp]

+najim H hey! Hard to say, it depends on the design of the brake rotor. ABUS has a printable template on their website, with the lock size and spacing. If you print that you should get an idea.

[@najimh5348]

cheers

[@JCCamp]

+najim H I don't know, but they have a template on their website for each of their products. You can print it at 100% and check your brake disk.

[@vaggelismarougkas793]

Hey which abus is better abus 8008 or abus 8077

[@JCCamp]

+Vaggelis Marougkas I don't have the 8077 so I can't say, sorry!

[@JCCamp]

+Vaggelis Marougkas I only have the 8008 so I can't say!

[@JCCamp]

+Vaggelis Marougkas I only have the 8008 so I can't say!

[@Jerrybasel]

I almost bought the 8077 but this have that bad replies i didnt buy it. The alarm goes on when you try to open. After a few times of use, the lock fall appart and all little balls fell out. The exchanged the lock but anyway...

[@emmanueltruchet9719]

can anyone owning a 8008 do this mesure please ?

[@c.g.c2067]

They simply cut the disk with a grinder if they really want your bike

[@YaboyCurtis_]

And that’s a €200 euro lock defeated in 10 seconds

[@c.g.c2067]

@@YaboyCurtis_ actually they just lift the bike and throw it in a van

[@YaboyCurtis_]

@@c.g.c2067 🤷🏻‍♂️ disc locks can only do so much.

[@MUNRO13]

Alarm accessible from top through thin sheet of metal. Grinder or ball hammer would stop the alarm in seconds. Crap design.

[@JCCamp]

+MUNRO MUSIC not thin metal by any standards, this thing is heavy and thick. And don't you think the sound from a grinder (+sparks??) would attract even more attention than the alarm? I can't test your hammer theory, but I doubt it as well...

Another KZbin "expert" without a clue about the world around him. LMAO

[@MUNRO13]

@ not a KZbin expert, a design expert. Not everyone on KZbin sits around in their underwear slagging off anyone with a brain cell

[@bloodymarvelous4790]

I'm curious how much the alarm is muffled if you cover up those 6 slits with your fingers. Also, 100dB isn't that loud. Would much rather have it be 110-120dB (10x-100x louder).