AC Series - Replacing the Inspira/Lancer AC Compressor

[@rumahshamsul3380]

Happy New Year bro! May this year bring u more health, happiness n wealth! Tqvmh for this good sharing!

[@lunasgaming]

When replacing the ac compressor, what else should I replace? Condenser? Dryer?orifice tube? Or is it okay to just ac comp?

[@GCA-Transparency]

Is this the same way to change on a 2016 Mitsubishi Lancer?

[@ooibt5943]

Thank you for sharing the video. Thumb up!

[@TCsAnythingGoes]

Thanks for your support bro. Appreciate it.

[@payperboii8477]

I have a 2011 Lancer Es, I'm switching out the old compressor for the new one, i believe its a qs -90, I got the a'c lines vaccuumed out. I was gonna ask, Do I need to vaccuum it again before recharging it with A/C and refrigerant oil.

[@TCsAnythingGoes]

yes, you will need to vacuum it out again before charging it. This is to ensure there is no moisture within the system.

[@payperboii8477]

@@TCsAnythingGoes I'm thinking i'm getting the hang of this. I'm going to install the compressor today. The part just came in!. Thanks for the information. Clear concise.

[@jmdhjr]

Hey man! Did you remove the refrigerant before taking out the old compressor?

[@TCsAnythingGoes]

I didn't have to. When the old compressor jammed, the refrigerant all leaked out.

[@jmdhjr]

@@TCsAnythingGoes ok man, thank you.

[@jmdhjr]

@@TCsAnythingGoes do you know the equivalent of SUN PAG 56 compressor oil?

[@jay4894]

Hi beloved bro you are my teacher. Can you teach me is that could be the compressor problem if my suddenly stop working after awhile. The funny is after my cool down its work again until I drove awhile the cluch stop again for sure AC getting warm.

[@TCsAnythingGoes]

If I understand what you are saying, possibility of a faulting magnetic clutch. As the compressor shut off is triggered by temp. However, if you are hearing odd noises coming from the compressor, its more economical to just change the compressor (since it comes with a new magnetic clutch) and have the whole system flushed

[@Neartizy]

Sir, I suspect my ac compressor have problems. It making noise when i turn off the ac and a bit noise when opening ac. Can i drive 400km on this problem?

[@TCsAnythingGoes]

High risk. You do not want to be driving long distance and later have the compressor jam on you mid way.

[@kinyew1988]

my inspira facing abnormal noise when compressor kick in, but ac cold as normal... do it will be compressor problem or just pulley problem?

[@TCsAnythingGoes]

Depends on what kind of noise. When was the last time you had your AC serviced?

[@monsta74922]

so how did you re-pressurize the ac system after you replaced the coolant? can i just add the coolant without re-pressurizing the AC?

[@TCsAnythingGoes]

Pressure comes from the compressor as it compresses. I did bring it to the shop to have the entire system vacuum and added in new coolant.

[@Aoneify]

Thanks for this video, I need to order the compressor but the auto parts place says there are two sizes for the belt. 3.2 and 4 do you know the size of the belt?

[@TCsAnythingGoes]

i am not familiar with the sizes you mention. If you meant the serpentine belt (aka V-belt, aka accessory belt), the size is 6PK2563 which translate to 6 channel and 2563mm lenght

[@Aoneify]

@@TCsAnythingGoes thank you for the reply, but that isn't it. They sell them with 4.13 Inch Diameter Pulley or 3.75 inch diameter pulley. That's what I was asking.

[@TCsAnythingGoes]

@@Aoneify Ahhhh.... got it. The size of the compressor pulley. Ok, from what i was told by the shop that sold the compressor to me, there is two sizes, big and small. It depends on which one your car is using. Early Lancer (2008 and 2009) uses either one so you gotta compare your original. Later Lancers and ALL Inspira uses the smaller pulley. Mine is the smaller one.

[@youbaklai7204]

Please show a video How To Install Brembo Brake Caliper Covers -Thanks.... 😃👍

[@TCsAnythingGoes]

Caliper covers are just decorative and I highly do not recommend installing those.

[@NemrMsr]

Compressor still working good?

[@TCsAnythingGoes]

Yes, its still cold as ice till today. had not had to replace anything else after this AC series completed.

[@Advicesquad]

How is the lancer sound insulating finale coming along? I am super excited to see if all your hard work made a big difference!

[@TCsAnythingGoes]

Instead of one more episode.... there will be 2 more episode. Had something unexpected happen so I did some soundproofing on the dashboard as well.

[@Advicesquad]

Sounds good, do you think you could estimate how much time/ money you spent on the project? I’m thinking of buying a Ralliart but I know the road noise it pretty bad in them so I’m very interested in seeing the results and knowing if it was worth the money and time! :)

[@crunchytacosupreme9371]

I have a 2009 lancer, compressor only engages one time and doesn't engages after that. What should i check?

[@TCsAnythingGoes]

Probably the magnetic clutch.

[@ankitpal9761]

I have same problem … u need to change only single bearing

[@garychia19]

Same problem... sometime it won't engage at all... sometime it does...

[@ankitpal9761]

@@garychia19 change shaft bearing

[@emmaniguico778]

Hi, i would like to ask for the details of the bearing? What size and if it has a code or part number

[@TCsAnythingGoes]

Which bearing? This video is replacement of the entire compressor unit.

[@muhaiminzaki452]

I having the magnet clucth problem, should i change magnet clucth only or new compressor? From your experience, what ur advise?

[@TCsAnythingGoes]

If there is sound coming from your compressor, then its better to change to a new compressor. If there is no sound (metal grinding metal sound), then just changing the magnetic clutch is good enough.

[@muhaiminzaki452]

Suddenly sound weird then bau hangit...

[@TCsAnythingGoes]

Need to see where the bau hangit is coming from. If the aircond is still cold, then there is a possibility that it could be the other pulleys. But if aircond is no longer cold, then confirmed compressor jam already

[@muhaiminzaki452]

@@TCsAnythingGoes done changed compressor jammed already n money fly awayy...haha..TQ 4 video..Nice info & sharing...

[@sgvrereferw6014]

The magnetic clutch goes on and off all the time, what do you think? Also the ac fan not working, fuses OK and the fan is new, what do you think? I have after market android head unit, and "can time out" error code on obd scanner

[@TCsAnythingGoes]

It is normal for the clutch to go on and off depending on the temperature you set. I guess you can check the socket for the AC Fan and see if its burned out.

[@sgvrereferw6014]

@@TCsAnythingGoes I did install a new fan and still not working

[@TCsAnythingGoes]

@@sgvrereferw6014 check if the socket connecting the fan is burned out. If it isn't then check if there is any voltage going thru the socket. If there is, try to hardwire the AC fan directly to the battery and see if it spins.

[@sgvrereferw6014]

@@TCsAnythingGoes thanx

[@sgvrereferw6014]

@@TCsAnythingGoes When I turn on the ac ,the 2 fans should work?

[@ainuddinawang6170]

Hello bro.. how the compressor now? Ist still ok? Just searching my new compressor. Wanna know if your compressor still ok then i will buy your type

[@ainuddinawang6170]

How much ml u fill in the new compressor?

[@TCsAnythingGoes]

@@ainuddinawang6170 the compressor is still cold and silent. Working perfectly well everyday. Not sure how many ml the shop put in.

[@ainuddinawang6170]

Tq bro very helpful 🙏🙏

[@butcht6309]

Great DIY job as always! When you say the compressor was stuck what were the symptoms?

[@TCsAnythingGoes]

the AC went off and there was a shrieking sound coming from the belt whenever the magnetic clutch engage. I had to disconnect the power to the compressor in order to continue driving else I think my serpentine belt would have burned as well.

[@butcht6309]

@@TCsAnythingGoes thank you for this video very informative!

[@rnapol3266]

Hey, how much PAG oil did you put in? How do you know how much to put? And how did you fill it? Thanks

[@TCsAnythingGoes]

I left that to the AC workshop when I went in to fill the gas. What I can see is that he put in via the the pipe as the gas. He vacuum the lines, then let the vacuum suck in the oil from a bottle. Didn't quite saw how much he put in.

[@rnapol3266]

@@TCsAnythingGoes ok thanks, and would you recommend changing also the evaporator? Why did you decide not to change yours? Thanks

[@TCsAnythingGoes]

@@rnapol3266 I changed out the entire AC set.....except for the lines.

[@ivanalbanez1257]

Hi. I changed the Compressor yesterday but started having idle problems, and some buzz when the compressor starts, do I have to let the new compressor get used to the serpentine belt? Or it’s normal to make a buzzing sound?

[@ivanalbanez1257]

Do I need to change the drive belt when I change the compressor?

[@TCsAnythingGoes]

i did not change the belt after I replaced the compressor. And there should not be any run in period for the compressor. Is your compressor new or reconditioned? Is it from Japan or China? When I did my research, we should always get back an original new compressor from Mitsubishi as the recondition ones is a gamble and China ones are just gonna last you 6 months to 2 years (or probably less based on some feedback i read) Idle problems after changing the compressor, there is a possibility that the compressor bearing is too tight or faulty hence causing extra load to the engine. But I can't really say for sure.

[@ivanalbanez1257]

TC's Anything Goes It’s brand new from Thailand

[@ivanalbanez1257]

It only makes like a little vibration, when it turns on, not in the pulley, the rare thing it’s that the sound only can heard in the inside of the car

[@TCsAnythingGoes]

@@ivanalbanez1257 hmmm... i suggest to check if the bolts mounting the compressor is tight enough. Another thing I would suggest is to check if any of the AC line is touch the chassis. I had similar issue on my other car (Myvi) when I changed the compressor and the AC line was touching the front crash bar.

[@mosalah9090]

bro, any noticeable difference between ori & oem u use? and how its going after 1 year?

[@TCsAnythingGoes]

I don't see any difference. As cold as the original. After 1 year, still working perfectly fine.

[@takauchinishika4701]

Well, Oem Condenser and Compressor is great with Original Cooling coil. Its depend on cooling coil quality. Sometime you uses the local product its probably not very cold

[@ooibt5943]

Can I know when to buy the Thailand compressor & how much?

[@TCsAnythingGoes]

i got it from a automotive AC part shop in USJ 1. If I remember correctly, its about 900 plus for the compressor.

[@ooibt5943]

@@TCsAnythingGoes Thanks🙏

[@chiang-heelim4740]

How do you remove the front quarter panel? Care to make a video? Thanks.

[@TCsAnythingGoes]

Front quarter panel.... you mean the fender. I did not remove it for this DIY. Don't think I will be removing it anytime soon since I have no DIY plans for that portion yet.

[@chiang-heelim4740]

@@TCsAnythingGoes from your video, looks like you have removed the driver side quarter panel because can see the serpentine belt easily.

[@TCsAnythingGoes]

@@chiang-heelim4740 ahhhh, you meant the inner splash guard. That's just a few clips. I already have a video on how that is removed in the link below: kzbin.info/www/bejne/ppSYmaJuqb2Zobs Its somewhere in the beginning of the video.

[@wsbst6682]

Does this apply to a 2011 Mitsubishi lancer?

[@TCsAnythingGoes]

It should be the same.

[@wsbst6682]

@@TCsAnythingGoes thank u

[@amizulmajid]

kzbin.info/www/bejne/iHu6lYetns9ofZY the asian vice hehe