This is a method in converting SURFACES to SOLID 3D. type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
@AC3DCad2 жыл бұрын
I might do a video on how to convert surface to solid soon
@pedrofula7078 Жыл бұрын
I am learning a lot in AutoCAD 3D. Thanks for your great topics!
@AC3DCad Жыл бұрын
Great to hear!
@mfrazeehvacc5012 Жыл бұрын
Excellent Tutorial. Thank you!
@AC3DCad Жыл бұрын
Thanks for watching and subscribing
@rehmatullah52744 жыл бұрын
i am following the videos on this channel, great explanation and smooth work, thank you very much for helping me learn Autocad faster.
@AC3DCad4 жыл бұрын
thanks for subscribing
@Neo.467.352 жыл бұрын
I recently discovered your channel and subscribed! You delivered excellent material and presentation! Thank you! Keep going!
@AC3DCad2 жыл бұрын
Thanks for subscribing
@christophebaud31088 ай бұрын
10:21 How do you display the selection tool that shows line, 3d solid etc... And how do you get a solid view of objects ? I mean the top lid created never go as a 3d solid. 06:47 you get the full object selected. I can't achieve that.
@AC3DCad8 ай бұрын
click the "selection cycling " at the status bar located at the bottom of the screen to turn the setting on.
@AC3DCad8 ай бұрын
For the elliptical DIsh Head, make sure that all all segments are joined before revolving it. You can use join command directly or use Pedit ->click one segment --> select yes to polyline-->click join --> click all the segments.
@shazlanbahri91653 жыл бұрын
great explanation and give me more helping for make drawing at autocad
@AC3DCad3 жыл бұрын
Thanks for watching
@Singham-gb2kw3 жыл бұрын
Helpful for me Thank you
@AC3DCad3 жыл бұрын
thanks for watching
@pavanarjun79383 жыл бұрын
u r just awesome
@AC3DCad3 жыл бұрын
Thanks for watching
@dwirego6232 Жыл бұрын
Where i can get the sample pict. For my practice?. Thanks
Could you make example how to make repad on shell nozzle?
@AC3DCad4 жыл бұрын
Good idea. I'll try that.
@AC3DCad3 жыл бұрын
kzbin.info/www/bejne/hmOkZYRma9F6rdU
@wejdanibrahem95132 жыл бұрын
Cood job, can you design a large oil tank by autocad 3d? I need it in my Project but I don't know how to design it
@pauljamesmarquez65404 жыл бұрын
Good day do you have a drawing of this one? thanks in advance and Do you have a tutorial of horzontal pressure vessel?
@AC3DCad4 жыл бұрын
I could not find my original drawing to produce a PDF file. I'll check again
@AC3DCad4 жыл бұрын
I have done a horizontal vessel in Cadworx. I'll do one in autocad for you soon
@AC3DCad4 жыл бұрын
here's the link drive.google.com/file/d/1C-unC1KUj-Q-qG4oP84dCTsacmq7mJZ_/view?usp=sharing
@asimsiddique95044 жыл бұрын
Madam can we make equipment & piping layout in 3D autocad
@AC3DCad4 жыл бұрын
it would take longer compared to using Cadworx, Autoplant or Autocad plant. To make it easier, create blocks for your pieces of equipment and fittings ahead of time.
@ligaspatay91344 жыл бұрын
Are you using Mechanical Autocad 2018 or just Autocad 2018? I have un-necessary line in 2:1 SE head shown in knuckle at layout space? Do you have any idea how to remove un-necessary line?
@AC3DCad4 жыл бұрын
just plain autocad. Wait a bit I'll check out what you mean.
@ghennadimedvetchii37165 жыл бұрын
Thanks for Your lesson
@AC3DCad5 жыл бұрын
my pleasure
@shanmugarajan38574 жыл бұрын
What's the elbow radius?
@AC3DCad4 жыл бұрын
I made a mistake, for NPS of 3", it is not 120 mm from the center to end but 114.3 mm and same with the radius.
@shanmugarajan38574 жыл бұрын
@@AC3DCad thanks mam
@AC3DCad4 жыл бұрын
@@shanmugarajan3857 u r welcome
@farahanis76853 жыл бұрын
Hi, this is really helpful and feel delighted for your sharing. At 6:36 when you revolve the polyline join, how to convert it to 6:40? Thank you.
@AC3DCad3 жыл бұрын
join first the broken segments by typing join command to make them into one object, then type revolve , enter 360 degrees
@farahanis76853 жыл бұрын
@@AC3DCad I have made them into join, if you noticed that revolve drawing to 360 degree. Thus my drawing will be at 6:36 but not same as 6:40 since the revolve line looked simpler
@chiefcleve18343 жыл бұрын
@@AC3DCad I have that same dilema too. I joined the object then when I revolve, it comes out like 6:36 with the lines crossing outside of the ellipse but not like at 6:41
@AC3DCad2 жыл бұрын
@@farahanis7685 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
@AC3DCad2 жыл бұрын
@@chiefcleve1834 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
@pauljamesmarquez65403 жыл бұрын
Good day Madam.Do you have a pdf file of this drawing thanks in advance
@AC3DCad3 жыл бұрын
Yes I have, drive.google.com/file/d/1C-unC1KUj-Q-qG4oP84dCTsacmq7mJZ_/view?usp=sharing
@vikrantrana93685 жыл бұрын
mam can we make animation video in autocad like soloidworks
@AC3DCad5 жыл бұрын
you can animate in autocad but I think it is very limited
@edygonlz41922 жыл бұрын
hello very good explained. You will have the plan in dwg, you could provide it to me, I would greatly appreciate it
@nsabir10003 жыл бұрын
But it is solid not hollow . Please let me know how to define thk.
@AC3DCad3 жыл бұрын
You can apply shell for thickness, I might make another one.
@hassanarain58324 жыл бұрын
sister can you give me pdf
@AC3DCad4 жыл бұрын
i'll take a look. I hope I still have the drawing. Maybe tomorrow.
This video explains the modeling of 3D solid Vertical Pressure vessel using AutoCAD 3D. The tutorial includes the creation of nozzles, flanges, and pipe nipples. For the dimension, pls click this link autocadnetwork.blogspot.com/2019/08/blog-post_17.html
@olatejutemitayo28492 жыл бұрын
at 6:37, how did you remove the gridlines from the crown ( there was a bit of skip) and i can seem to do it
@AC3DCad2 жыл бұрын
@@olatejutemitayo2849 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.