Good stuff! Don’t be afraid to go more in-depth if needed, and also if you can be bothered 😂 You’re building up a great little knowledge base for the K12, often the first car for kids just passing their tests. It will encourage them to work on their own cars, or at least give them a start and save them money. The K12 is a great first car. I’ve got three, one for each kid (The Micro Display Team of Great Britain😁) Great resource for basic serving etc. Thanks!
@screwsnutsandbolts Жыл бұрын
Thank you lol. I'd like to think they're red, white and blue like the minis in 'The Italian job' :)
@Wasserverschmutzung Жыл бұрын
Access to those bolts looks so easy on LHD, on RHD it is a pain! My micra was sometimes throwing APP errors with check engine light, then going to limp mode. If someone has the same problem, before buying new part, try to unplug the connector, clean the contacts, then plug it in and make sure it's plugged in really well. I did that and it works well for a year or two now.
@ofentseselomo50158 ай бұрын
Hi. mine even gives rough idling and kangaroos when driving. Did you experience this?
@الأسطورةعلي-غ6ض Жыл бұрын
How can we communicate with you? I have a problem with the car and I didn't know the problem. Car type Nissan Micra k12 (2003) Please reply if you would be so kind and thank you
@hamzamuhammad819711 ай бұрын
Very helpful. Thank you so much 😊
@screwsnutsandbolts11 ай бұрын
You're welcome !
@sergiofernandes4302 Жыл бұрын
Love your videos ! Can you make a video in how to change the lock from the fuel door of a Micra K12. 😊😊 thank you 🙏🙏
@screwsnutsandbolts Жыл бұрын
Thanks, I will if I can
@clee666 Жыл бұрын
Is it the same procudure to calibrate the pedal on a Nissan Rogue 2008?
@clementmarcelle7852Ай бұрын
Super thanks
@everybodyneedsasteve4 ай бұрын
I've just got a 2006 K12 auto for my daughter who's just turned 17. The accelerator pedal is really sensitive for the first part of the travel and it will lurch forward quite quickly if you're not careful. I know autos will creep forward anyway, so need to control this using the brake pedal, but does it sound normal for this rapid acceleration at first touch of the accelerator pedal to happen? Or could this be a position sensor or throttle body issue?
@screwsnutsandbolts4 ай бұрын
I've heard people say that's common with certain small japanese cars and it's just something you have to get used to. I haven't worked on an automatic transmission version so I couldn't say whether it's anything to do with that or just the throttle response.
@paolobittapooh3 ай бұрын
It is not normal. My micra was doing the same after sitting for years without a battery. The ECU needs to relearn idle air with the idle air calibration procedure
@bggdcc3341 Жыл бұрын
👏👏
@screwsnutsandbolts Жыл бұрын
Thanks
@СержантАндриевский Жыл бұрын
привет. Как правильно должна быть подключена магнитола? какие провода и куда идут?
@screwsnutsandbolts Жыл бұрын
The radio?. Like this ?: kzbin.info/www/bejne/q5uVh4tvd6atj9k
@shaagealgareb9189 Жыл бұрын
thank you
@screwsnutsandbolts Жыл бұрын
You're welcome
@bhavinfunfacts7128 Жыл бұрын
Hello My Nissan micra 2004 e. Noise from dashboard or suspension when turning and on ruff road. I don't know what to do.
@screwsnutsandbolts Жыл бұрын
What type of sound, knocking, scraping ?
@bhavinfunfacts7128 Жыл бұрын
@@screwsnutsandbolts thank you for reply. The sound is like knocking two iron plates touching the ruff road. That sounds like it came from the dashboard. And can feel in steering.
@screwsnutsandbolts Жыл бұрын
It could be a few things but it sounds like it might be a worn steering arm, possibly an inner tie rod: kzbin.info/www/bejne/rnyocoSNit2IjNE
@waleyefish9026 Жыл бұрын
Then drive vehicle by wire.👍
@PhilipMaguire-iy2th6 ай бұрын
K11. 2000.2002 ?
@screwsnutsandbolts6 ай бұрын
This is a 2003 K12
@adildaniyal7917 Жыл бұрын
How to repair it ?
@screwsnutsandbolts Жыл бұрын
I think this one is sealed so you have to replace the entire unit.
@tironebowlyn8634 Жыл бұрын
What was the issue that made you change this sensor?
@screwsnutsandbolts Жыл бұрын
No issue, this was just for demonstration. The video description explains some of the possible symptoms you might experience if this unit becomes faulty.@@tironebowlyn8634
@PaingHtetZaw-p6r Жыл бұрын
How to test good or bad?
@screwsnutsandbolts Жыл бұрын
Check this video: kzbin.info/www/bejne/emPZmHePf7JgmJY