Acedeck Ares x1 2023 New Element Gear Drive System

[@DrewElia]

Make sure to use code DREW15 at check out to save even more off this system!

[@Steven-qm1xo]

I bought one today ready for when my new Ares X1 arrives . I like the street wheels and having thst much torque will be fun..I like how quiet the system is to..The burn out looked cool..Used your code thanks Bro...🖐

[@DrewElia]

Awesome my man! Appreciate the support! You’re going to love the system!

[@Steven-qm1xo]

@@DrewElia im sure it will go well with the X3 for a weekend of street riding...😀

[@sageoz9886]

I just put in an order for these and a rear truck to upgrade a current Meepo belt drive system. So excited! Thanks for the great review and discount code! 😁

[@DrewElia]

niceeeeee

[@eBoard3R]

⚡ *Had me at street wheel compatibility!* ⚡ Has a very unique look to it 🤙🏼

[@DrewElia]

Right on! I agree Bruv!

[@akalia_07]

Acedeck is taking a homerun this year. Great to see that company listens to feedback and using that to design something that are available for anyone that is wanting 2 in 1. Thanks for the review as always!

[@DrewElia]

Agree!! Thanks for checking it out brother!!!

[@poncho1567]

Great review and how to. Acedeck really showing they care about current owners. So many options. Fantastic customer service.

[@DrewElia]

agree you now have so many options for boards that you've previously bought!

[@poncho1567]

@@DrewElia yes it's smart marketing. Knowing you can buy a board from Acedeck (mutiples) and know they will probably have retro fit upgrades as the technology improves instead of having to sell the board and upgrade. And nothing like bolting new tech on that you notice the difference. Brings back the new feeling again. Nice work again Drew.

[@DrewElia]

@poncho1567 thanks so much!!

[@eSkateNL]

Very cool stuff Drew

[@DrewElia]

thank you so much for checking out the channel and supporting me!!

[@kbEskate]

Just what the Acedeck lineup needed...more torque, 😂 Acedeck is always innovating. How small street wheel do you think the Nomad with this gear drive can reasonably handle without bottoming out battery enclosure or scraping gearbox itself?

[@DrewElia]

I will install this on my nomad in the next video and answer that question!!

[@robras2850]

90

[@user-sn9od2cy4v]

Really enjoyed the review, the quality of your camera while assembling is insane

[@DrewElia]

Thanks, appreciate you checking out the channel! Make sure to subscribe for more content coming out soon!

[@user-sn9od2cy4v]

​@@DrewEliaBeen your sub since 2S max review!

[@StMediaNL]

Hope they release the N1 with this gear system pre-installed. Then I'll be game. Thanks for the video. Tiny tip: camera with manual focus so you can pre-focus and keep it at that. :P

[@DrewElia]

Yes, they should maybe in the future! Yeah, filming this on my kitchen table with two kids running around. Slipped my mind to manual focus 😆

[@sageoz9886]

Finally got these in mail today, well worth the wait. They look amazing in quality and design. Took a bit of time to mount up but went very smoothly. It’s great having your assembly video however I do feel it’d be good to include a small printed diagram and simple directions to make sure all parts and screws go in the right place. Included gear grease is super sticky lol, was not expecting that. Packed it in and it runs super smoothly; quite a bit less loud than I thought, it has such a sweet mechanical purr. Haven’t mounted wheels and ridden yet because I forgot to order 10mm inner bearings for the X3 rear truck ( I use a Major Arc in front). I got their rear truck to make sure everything was compatible and a perfect fit. The precision trucks are amazing. The whole set-up looks so good, can’t wait for these bearings to get here so I can finally shred this beast of a Frankenstein board

[@DrewElia]

That is so exciting!!! Can’t wait to see the finished product!! Where can I see it?

[@sageoz9886]

@@DrewElia I’ll drop pics on IG soon. I need a new camera, think I’m gonna pick up an insta360 X3 soon

[@sageoz9886]

All dressed up with nowhere to go! Franken-Board is ready to rip but we’ve got rain on the forecast for the next week and half at least😢😂 Wow, the Element drive sounds so good! It’s like a very satisfying mechanical feline purr from a well engineered turbo charger, not at all loud or obnoxious as I feared it might be in person, rather just loud enough to give some sense of excitement and feedback. Tested it out a bit in my building’s indoor parking lot and it’s response and ride feel seem amazing. Can’t wait to get out on the trails when it’s finally cleared up a bit. This dang PNW winter weather be messing with my esk8 Wha-Pah game Here’s a list of parts on this one: Electronics: battery, motors, ESC and remote from Meepo Voyager Deck: Santa Monica Airlines old school Cruiser repop Front truck: Major Arc Rear truck: Acedeck Ares CNC with Element drive Waterborne surf adapters front and rear Waterborne carbon extenders front and rear, mounted on EU bushings for some suspension Front wheels: Formula 110’s with custom carved Shark wheel grooves and cross drilled, Acer ceramic bearings Rear wheels: meepo 110 rubber Riptide bushings (and cup in rear truck) Shredlights front and rear(upgrading to blutooth version soon) Very thickly padded grip tape made from layer of cork subfloor over a layer of yoga mat.

[@davidcarbon9771]

I love what Acedeck has been doing in esk8. I wish the made a dkp option for us tight turning bois. Their craftmanship and customer service has been top notch.

[@DrewElia]

Yes cnc DKP would an amazing edition to the line up!!

[@Steven-qm1xo]

Acedeck version of DKP would be cool..👍

[@sageoz9886]

Perhaps there are existing DKP center pins from other manufacturers that might be a compatible fit? Likely it wouldn’t be too difficult to make one custom with a machinist. Adding a Waterborne surf adapter to the TKP is a another solution. Also the Major Arc trucks work amazing on the front and have a low stack height. I even mate both systems together on all of my boards (also using the rear adapter) to get a really agile front end with my rear trucks reversed for stability…it’s an unusual set-up but I’m convinced it’s unmatched in providing the best worlds of stability and nimble handling

[@DrewElia]

omni eskate makes dkp cnc trucks that you could swap out

[@jeduwardovega6239]

That burn out means power 🔥 awesome video my Doctor S🔥

[@DrewElia]

Word right! Just smoky burn outs 😆

[@liangsa]

Great video Drew! Do you know if the 3 hole mounting pattern on the truck hanger is the same as most other trucks? I'm wondering if these drives could fit on other brand trucks since most trucks use the same 3 hole mounting pattern (evolve, meepo, etc...)

[@DrewElia]

That I’ll have to check out has rim not to sure, reaching out to Acedeck directly would be your fastest way to get an answer for that question!

[@mikeodell5915]

I like this street set up ....this might be it for me.

[@DrewElia]

yes, if you're a street wheel purist this is the gear drive for your acedeck!

[@Michaelajacksonfilms]

Can you do a "Graduating to Level 4" video? I got my first (v4s) board about a year ago, now I have had a voyager-x for 6 months and NEVER thought I needed 4th gear/level on the remote. However 3rd gear/level is getting at bit comfy/slow. I would like some pro input on riding in the higher range of an electric skateboard safely. Thank you for all you do!

[@DrewElia]

i maybe could make a short video, i have a lot of videos in the queue

[@Seigegamin]

My new belt drive Aries just arrived and Jesus it’s scary fast, still haven’t got it to top speed yet, only problem I have is the way the lights attach is a afterthought in my opinion. Overall wayyyy good deal for the money

[@DrewElia]

Glad you love it my man! So pumped to hear about peoples experiences

[@RicoWorldPeace]

Nice review, I'm so tempted to throw street wheels on my Nomad but, my HOTA wheels/gear drive combo are getting it done. If it's not broke right? Maybe one day

[@DrewElia]

yeah this is a lot of fun, but your right, no need to change out if you're enjoying your ride! I love the street wheel feel, but HOTA makes some great wheels!

[@mikeodell5915]

I like this street ser up

[@adamrae-xt5rz]

Hey brilliant video! this is the best resource I have found by a margin to help. I have two very random questions, (I have just done the reverse of this and installed the old gear drive back while awaiting the at wheel adaptor for the new one) I'm just second guessing the placement of a couple of washers, where do both of the ultra thin washers live? I assume behind the motor bearings in the top covers but can't make it out properly in the video, sorry to ask. Also is the rattle between the at wheel drivers and the wheels normal? Any tips to reduce the rattle would be great, thanks for any help 😊

[@DrewElia]

Not sure what rattle you’re speaking of, if it’s a clicking noise then you’re probably fine it’s just the gears settling into themselves as it rolls forward and backwards. Yes the washers should be between the top plate and motor I believe, but reach out to Acedeck directly and they can definitely help you.

[@adamrae-xt5rz]

Thanks so much for replying and yes I believe it is the gears clicking, I'll reach out to acedeck to confirm but thank you for the peace of mind 😊

[@WAVMOB]

That thing sound torquey, wonder what the range would be on that new gear setup with the rubber street wheels

[@DrewElia]

so the 115 are heavy, and i noticed a lot of the range was shed quicker than i thought it would be, the Onsra Tarmax i put on after i noticed a huge jump in range improvement and the mad 105 ive been riding as well also about the same in range as the tarmax

[@robras2850]

Rubber wheels are cool but no good on range compared to thanes

[@sageoz9886]

This is my number one need to buy board

[@DrewElia]

To be able to have 2-1? or street wheels?

[@sageoz9886]

@@DrewElia yeah it’s a 2 in 1

[@mikeodell5915]

I want to get another eboard and having a difficult time deciding what to get ....been skating my whole life and eboarding for over 6 years .. .can't decide with all the options now.

[@DrewElia]

there are a TON of options which is a win for us as consumers! what are you trying to get out of your board?

[@fitwithandy]

You can get the nomad n1 customised with this cnc gear drive for 1299 usd with the molicel battery... sounds like a good deal to me... you can run the mad wheels 105 v2 on it or even some hota all terrain 6inch wheels... The torque is enough... I would like to see a acceleration test woth the 180 wheels and the at adapter on this thing.. then yuo probably have to switch in s+ mode ;-)

[@DrewElia]

I’ve learned how to take S+ mode! That’s a deal for that board! 180mm is large, I’ve just been testing 175 with the newest OMW board and loving how they feel. The gearing ratio on the element gear drive is 2.8 and on larger AT tires would be sluggish

[@joehiatt1992]

Just got the Nomad ,what sucks is u have to buy the entire assembly instead of just a pulley/gear swap,the kit is $280,I know they had to change the gearing,so its a well over $400 with tires.

[@alessandrosalomao8682]

Me too, I just got the Nomad.😢

[@DrewElia]

The Nomad is GNARLY by its self! This is just something to offer people who have had the belt drive ares or want to run street wheels on their system! The AT Nomad is crazy powerful and a lot of fun!

[@joehiatt1992]

@@DrewElia Hows it (nomad)compare to the Hoyt,I was checking that one out ?

[@DrewElia]

@@joehiatt1992 hoyt is a different level of product. But the Nomad and Ares 2023 are the torquest of the production boards I’ve ever tested.

[@HaunchoJackHD]

Is this the same as the Linnpower V4.3 CNC Gear Drive ? It’s says that one only takes 150mm-200mm wheels and this 90mm-150mm wheels . Is the power and performance the same

[@DrewElia]

No it’s not the same as the Linnpower, that gear ratio is higher for AT style wheels. This is geared for street style wheels. You can use up to 155mm on the new set up but it will be laggy almost as powerful off the line. This is really meant for 100-110 style street wheels. Just rocketing around on those.

[@mikewilliams2126]

Busiest guy on KZbin!

[@DrewElia]

never ending haha

[@ianrobertson7043]

I wish they included instructions. It looks like you reused the stock pinion gear ? No need to use the included gear puller and swap to the new smaller black pinion gear ?

[@DrewElia]

No I did swap it, I believe you need to use it with the new gear set Up

[@fitwithandy]

Is the AT Adapter the same as the one who comes shipped with nomad n1 and Ares x1 gear drive?

[@DrewElia]

No the one that comes with the Nomad is geared for AT style. The element is more geared for street wheels, it can use up to 150mm wheels but at the loss of torque off the line. S

[@MadDonJuan]

Now that looks good!

[@DrewElia]

I agree, the fit and finish is gorgeous

[@Steven-qm1xo]

Howdy Drew. 🖐 i bought this system and would like to know what you believe the range would be using the 115s compared to the 105 wheels...? Thanks bro 👍

[@DrewElia]

So ive been riding the 115 and i find that my range has drained a little more than i thought it would? they are heavy rubber wheels, but i was doing a lot of carving and enjoying the board, 105 I think is that perfect not to small not to big great grip and range in there

[@Steven-qm1xo]

@@DrewElia awsome Bro..🖐.. So looking forward to receiving the new kit..I have both sets of wheels so its great to know the 105s with take me further...You do a great job of your videos and i really appreciate all your hard work ...Thanks Mate. 😀 Enjoy..☄🚀👍

[@DrewElia]

Dropping a video today in the Onsra tarmax and this board set up, truly an amazing wheel choice as well but really really low tot he ground.

[@Steven-qm1xo]

​@@DrewEliai believe the 115s are going to be a great choice for the Ares X1 you may not get as much range but they definitely ride well over most roads...

[@DrewElia]

true, trade offs that we have to make

[@rui189]

Hi friend, do you think this gear driver will work on the Meepo with Zeus Pro truck?

[@DrewElia]

I dont believe that it will work as of right now? It might be available at a later date, you can also check out my Omni gear drive review and that would fit the meepo and the zeus

[@esk8unity]

#StreetGang ✅✅✅🤘🏼🤘🏼

[@DrewElia]

helllll yeah!

[@trevorkenny]

I need to win me the lottery so I can get all these toys.

[@DrewElia]

Word my man. Power ball is over 1.4 billion

[@ravenous6324]

Great looking board. Swapping out the wheels / gears aint something I'd want to do on the regular!

[@DrewElia]

yeah the gears is set it and forget it, while the wheels are just as easy has removing the nut and putting the wheel on!

[@Esk8Nomad]

Dope Video

[@DrewElia]

Thank You 😂

[@willlawson6126]

So is this a different gear drive system than what comes factory on the Nomad N 1?

[@DrewElia]

Yes this is their new upgrade to street wheel style allowing you to use 90mm to 155mm wheels

[@willlawson6126]

@@DrewElia oooooo. So basically a must have.

[@DrewElia]

hahah, idk about a MUST have, but if you're looking to run street wheels its the only option for acedeck

[@KudaBear-gj9br]

What's the difference between this and what ships with the gear drive Ares X1 2023?

[@DrewElia]

This lets you use street wheels. Kegal adapter abec adapter and an AT adapter up to 155mm wheel

[@KudaBear-gj9br]

Cool! One thing you should mention maybe is that these are all CNC, the other motors that ship with Ares etc. are polymer and POM. @@DrewElia

[@DrewElia]

@@KudaBear-gj9br true, you can see that in the video that they are a delirium/ POM material!! But I’ll say it out loud next time

[@KudaBear-gj9br]

Confused. Aren't the element ones CNC throughout, no POM? @@DrewElia

[@fitwithandy]

you really need a sensitive thumb though.... 😂 don't mess with the remote in s+ mode 😮

[@DrewElia]

that off the line is nuts, you can change settings in the remote to dial back the the curve!

[@solorider-gq2pl]

dont you love the sound of those motors!!!

[@DrewElia]

Absolutely!!!

[@aykutlondon4784]

Anyone know how i can do a burnout if my board is 4WD

[@DrewElia]

im sure that you can

[@aykutlondon4784]

@@DrewElia but how lol? I wanna do it

[@DrewElia]

@aykutlondon4784 just put your foot in front of the board and rip it!

[@aykutlondon4784]

@@DrewElia I'll try it out. I don't want to be knocked off my feet or something. I've got the Ares x3

[@DrewElia]

@aykutlondon4784 ohhhhh, well give it a try but I don’t know what wheels you have on there! Direct drive is a different beast