Achieve Stunning Results with 4 Color Heat Transfer Vinyl

[@novalunathevoidcryptid]

All those colors and layers, many of which with very thin lines is impressive! Layering vinyl can be quite tricky, yet you made it look like a breeze. Bravo!! That was amazing to watch.

[@HeartHustlePrinting]

Thanks for watching..

[@JoseAndrade-ke4fz]

Never seen anyone take the time to reply to every single comment. Even the questions that you have already answered 30 times. I appreciate that. Just for that I am subscribing!

[@HeartHustlePrinting]

I do... Every single one. Well I hope I haven't missed any. From one Jose to another Thanks for watching and Subscribing!!!

[@BruceLeef]

@@HeartHustlePrinting 🙏

[@teambelltraining8958]

As a new person coming in, this video showed the detail and care it takes....I appreciate that

[@HeartHustlePrinting]

No problem. Thanks for watching... Make sure you click the bell if you subscribed so you will be notified when new videos come out..

[@HalfAssHomestead]

Joe, Thanks for sharing your methods of doing this. I have been wanting to, but have held back in fear the carrier sheet could destroy the print already in place. I never would have guessed such little time to set the print under less than full pressure. Thanks Bro.

[@HeartHustlePrinting]

Thanks David. Yeah just give ea color a pre press then on last press press for full amount of time..

[@mrcarlo1966]

Even though I do this as a hobby I picked up quite a few tips from this video.Thank you for your time.

[@HeartHustlePrinting]

If you watch more of my recent videos there are more tips. Thanks for watching.

[@TheWorkBench]

Its a lot of work but you can really make shirts pop and very attractive. My first heat press was a 16x20 Stahls from someones garage. Then I got everything else to get going. Its about what people want, creativity and skill that get you far. Siser easyweed stretch is a good way to go and lasts for a looong time vs just the regular. I've had stuff for 10 years and one that I had done 9 years ago on my jogging shorts which was Siser Easyweed Reflective. This is so much fun!

[@richardcolbourne6151]

Really inspired by this. I'm just about to start producing on my Own. Thanks for the tips.

[@HeartHustlePrinting]

Awesome to hear. Im getting ready to do a big giveaway if you want to be axprat of it all you have to do is be a subscriber. Make sure you click the bell so your notified when ill be doing it..

[@drrehabdirector4973]

Awesome work! You definitely have a lot of talent. Thank you for sharing your skills with others. God bless.

[@HeartHustlePrinting]

Thank you for watching and kind words Dr. Rehab..

[@LorraineCastellon-Rowe]

You make it all look so easy!! Beautiful!!

[@HeartHustlePrinting]

Keep at it and in no time you will perfect it.

[@K0dexSister]

I was absolutely captivated watching this. Looks brilliant, well done.

[@HeartHustlePrinting]

Good the hear that... Thanks for watching...... KEEP PRESSIN!!!!

[@kendrapope2905]

DOPE! I can't wait to get to this level of perfection.

[@shieasehorton1753]

Thx for the video. Just getting into this tshirt thing but learned so much especially the way you did a cut-out instead of layering so much easier and saves vinyl. Thx....

[@HeartHustlePrinting]

Awesome!!! and welcome... If you need help or got a question on something let me know... Also follow on IG always posting there also.

[@cherylbrownlifeexposed3926]

Hey H&H... This was one of the first videos I watched when I first started... A couple of years ago!! I use to watch it everyday... Lol

[@HeartHustlePrinting]

Thanks for all the support Cheryl... Look at us now....

[@kovuk9]

That is BEAUTIFUL work sir

[@HeartHustlePrinting]

Thank you!!

[@michellewalker4257]

Please keep making videos thank you for helping people like me

[@HeartHustlePrinting]

I will. Thanks for subscribing

[@F.Y.Mjaytee3700]

Bro. You are fucken bad ass with your craft! That art work bro on that transparent paper is clean asF. You are insane with it bro. Thanks for sharing

[@HeartHustlePrinting]

No problem!! Thanks for Watching..

[@_desertwalker_]

Gday from Western Australia. Really nice work mate, thank you for taking the time out to show us the ropes. Really learnt a lot just then. Warm Regards.

[@HeartHustlePrinting]

No problem. Thanks for watching.

[@MrIge2005]

Layering is awesome! Thanks

[@JamallWilliamH]

Great video, I've watched it 3 time. I Had to look for your video again, I made sure I saved it. Thanks.

[@HeartHustlePrinting]

Awesome glad I could help. Look at some of my newer stuff I do full walkthrough. From start to finish... Thanks for watching. KEEP PRESSIN!!!!!

[@ShainaNewborn]

OUTSTANDING WORK! Thank You for sharing!

[@HeartHustlePrinting]

No problem.. Thank you for watching Shaina..

[@octavionoelwilliams7450]

This blessed me so much more then thee others much respect to you sir...

[@HeartHustlePrinting]

Glad I could help. Like I tell everyone let me know if you need help with something..

[@gattonpc]

I don't get something.. How this Blessed you so much. Can i get a onest enswer?

[@HeartHustlePrinting]

Wow... Maybe he didnt know how to do what I did and hes been struggling with getting it. Then he saw the video and now has a better understanding. And now is being BLESSED with 💵💰💸.... Love people like you who fuel the 🔥🔥🔥🔥. Hope this now BLESSES you.... 🎤 drop...... PS: What is a onest enswer???? 🤔

[@gattonpc]

@@HeartHustlePrinting Lool.. That is quite a story.. do you even bellive in what you saying? Is the reality to hard for you to understand? I'm not Blessing anyone with anything.. just bring the reality back in the mind of the people that are to blind to see it. Like you for the start. and the ones enswer is the one you can deliver.. In your case is an enswer from the wrong person. or you can speak for others now? My comment wasn't for you if you didn't noticed yet.

[@Jamaicanbacon30]

I want to learn how to take those individual pieces out. The process of the Little pieces

[@HeartHustlePrinting]

Heres the perfect video for you. Thanks for watching.. . kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@dcmtrader]

Dude, nice detail work!

[@HeartHustlePrinting]

Thanks Deep Pockets

[@constancelevering4296]

Nice video...that is WONDERFUL...thank you for sharing ! 🙏❤️

[@HeartHustlePrinting]

Thats for watching!!!!

[@trustsalama2807]

You are a legend, period!

[@HeartHustlePrinting]

Thanks for the kind words..

[@oniwindeben4332]

just seeing this video, but I must commend you. A good job there..💯

[@rodypollock8935]

excellent, thanks for showing how to get it multi colors I already have a order coming in needing 4 colors.

[@HeartHustlePrinting]

No problem. When your ready for you next order let us know.

[@naysworld]

Thanks for these videos, they really motivate me.!!

[@HeartHustlePrinting]

Thanks for wat hing Naysworld.

[@knightride9635]

Beautiful work, I hope you are making some good money because it takes a lot of time

[@HeartHustlePrinting]

It does but well worth the smiles..

[@danialm8122]

This is we call ART.

[@HeartHustlePrinting]

Thanks for comment!!

[@chad4452]

Dude amazing stuff. Precision to detail!

[@HeartHustlePrinting]

Awesome thanks. Make sure you click the bell so you are notified when I put out more videos....

[@HeartHustlePrinting]

Awesome thanks. Make sure you click the bell so you are notified when I put out more videos....

[@HeartHustlePrinting]

Thanks for watching.

[@kjmix1]

Great job on the video. I knew the theory but needed to see it done. Vinyl Newby says Thank you

[@HeartHustlePrinting]

Need vinyl like I have since opened a store... . WWW.TheVinylStand.com . KEEP PRESSIN!!!

[@darens3907]

They need to be made the press with laser lines to line up everything.

[@HeartHustlePrinting]

Yeah they do..

[@schumaker221]

That's awesome print, looks amazing.

[@HeartHustlePrinting]

Thanks Evaldas

[@kaywoodparsons1874]

Beautiful Work

[@HeartHustlePrinting]

Thank you

[@RichAds]

Wow very nice tutorial sir, keep it up.

[@HeartHustlePrinting]

Thanks for watching RichAds..

[@RichAds]

@@HeartHustlePrinting welcome sir.

[@HeartHustlePrinting]

Im alsways putting out new videos to help thoes who are interested in learning. Click the subscribe and bell so you will be notified when a new video comes out..

[@karenrivers-johnson2210]

This was beautiful

[@HeartHustlePrinting]

Thank Karen..

[@deblake60]

Very interesting! Would you happen to have a video on how you setup all the designs and the cuttings? I'm a bit confused on the outline piece fitting with the color body?

[@HeartHustlePrinting]

kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@janmayeaux6392]

Wow! This is exactly what I needed!!! Thanks!!!

[@HeartHustlePrinting]

No problem. If you need some blk or white vinly we carry it....

[@lramlu]

Oh my God! This guy is bionic! Did u see how fast he wa weeding? Hahaha!

[@HeartHustlePrinting]

HAHA I was born with super speeds. 😂🤣😂

[@robbie1266]

Ty just learnt something new. 🐐

[@mattkoehn7810]

Loved this. Good stuff man

[@HeartHustlePrinting]

Thanks Matt!!

[@lindaboucher598]

awesome video-great multi vinyl press-love your work-thank you

[@HeartHustlePrinting]

Thanks for the kind words and watching Linda.

[@paulhawkins3763]

Great work man, thank you for sharing.

[@AITab-duang]

GOOD, I have tried the INWISH Vinyl, is very good.

[@HeartHustlePrinting]

Which one

[@creativetips97]

I enjoyed the process

[@HeartHustlePrinting]

Thanks for watching!!

[@holladirecttv]

YOU'RE GOOD AT WHAT YOU DO MAN!

[@HeartHustlePrinting]

Thanks HollaDirectTV

[@JJCGCAZ]

Thank you bro!! Keep it up great videos!!👍🏽💪🏽

[@nataliemarie2528]

Thank you, I’m getting ready to buy a heat press and get down... Lol! Love yr channel thanks again🖤

[@manpare6767]

great work.

[@HeartHustlePrinting]

Thanks Man Pare

[@jayp6945]

Still Binge watching bro! LOL Great video!

[@HeartHustlePrinting]

i appreciate it.. You need to upload more so i can do the same.

[@jayp6945]

@@HeartHustlePrinting working on it lol

[@kingjeffishere]

Awesome vid!

[@HeartHustlePrinting]

Thanks for watching.

[@rbkens81]

i'm starting on my little business in baja california it was so helpfull... thanks

[@HeartHustlePrinting]

Congrats and No problem. Look at some of my new videos for more tips.

[@aldogarcia2150]

Thaats Right ! Same here Tijuana, B.C

[@HeartHustlePrinting]

Thanks Aldo...Make sure you click the bell you will be notified when I put out new videos...

[@aldogarcia2150]

@@HeartHustlePrinting yeah thanks just one question which heat press you use ?

[@HeartHustlePrinting]

Tusy 5 in1 heat press (12x15): Nothing fancy. These get the job done.. amzn.to/2ZeLXcu Tusy New 5 in 1 Heat press (15x15): amzn.to/2lm9oCL

[@coryjeffreys5146]

Looks great

[@HeartHustlePrinting]

Thanks Cory

[@Mr_Chuckles]

Beautiful product, but man what a ton of work. Probably easier to print on digital HTV, of course you would have a bigger, solid print then.

[@HeartHustlePrinting]

Thank you. When you first start out its all about the HUSTLE and you dont care how much work it takes. Look at my new videos and see where im at now bc i did stuff like this. V/R

[@Mr_Chuckles]

@@HeartHustlePrinting Very true, gotta put the work in to make this a success and level up. My biggest challenge right now is getting out there and getting customers. So many cheaper, online options for people now.

[@borneofingerstylelegacy3051]

Wtf bro.. So smooth..thanks for the video..

[@HeartHustlePrinting]

Thanks for wat hing Borneo

[@paullagates-lewis7870]

Thanks for the HTV video.

[@HeartHustlePrinting]

Thanks for watching..

[@simonpike779]

Man you make it look so easy!😀 it would look like a hot mess if i tried!

[@HeartHustlePrinting]

Lol.. It happens to me sometimes but as long as you have a plan it should come out right.

[@deadmau51973]

thanks for this video man.. it gives me idea on it...

[@HeartHustlePrinting]

No Problem.

[@rachaeldiaz9983]

great video! i'm new to this. learned alot. thanks!!!

[@HeartHustlePrinting]

Thanks for watching... We got more videos.. Make sure you Sub for more info..

[@juansalazar2192]

yo también hago lo mismo. Cuando ya tienes tienes tiempo y conoces el trabajo es fácil y perfecto. como lo que yo hago. ;)

[@dealerrecon]

What kind of heat press is the blue unit in the video? Also, what type of cutter/plotter and software do you use? Your work is exceptional! Thank you for your knowledge and your videos are very nice to watch!

[@HeartHustlePrinting]

The heatpress is a 16x20 that i got off of Ebay. That cutter 8n the video I dont use anymore. I now use a Vinyl Express QE6000. The one in the video is the R series II. You can find at Signwarehouse.com

[@MrKmetski]

So you slice cut each vinyl to make that the 4 color process without layering?

[@HeartHustlePrinting]

Yeah. I like to get all the vinyl to stick to the actual garment its self.

[@kevonone7915]

How do I go about setting up a multi colored design for heat press? If a word has outlines and strokes, how do I know what size to print the outline versus the actual boldface letters? Same for a multicolored image. What is the actual setup and cutting steps?

[@HeartHustlePrinting]

Whenever you are in your program and you type out a name you will have the option to add a outline. Doing this will take out all the gurssing work when it comes to sizing it up... Hope this helps.. . kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@babymarcus123]

Have you ever pressed a yard sale sign? I wanted to make senior graduation signs.

[@HeartHustlePrinting]

Hi Dr. Yard signs are done with Adhesive vinyl or screen printed with a certain type of ink.

[@babymarcus123]

@@HeartHustlePrinting Thanks for responding - do you have a wholesale recommendation for purchasing corrugated paper for the signs? I live in Orlando.

[@HeartHustlePrinting]

No sorry I dont do alot at this time so I haven't really looked..

[@leviteapparel]

HAD TO WATCH AND LIKE VIDEO ON POINT

[@HeartHustlePrinting]

Levite email me [e-mail] I need to send you package but need info.

[@beastingmode7506]

Can you tell how you did the layering so outline of each piece made easy?? Which software and cutter and the steps (method) you used.Can you tell me what i need to start doing this and also make my own stickers and stencils for shoes designs :) :)

[@HeartHustlePrinting]

Thanks for watching. I now hoav other videos showing step be step how to layer and not get gaps..

[@HeartHustlePrinting]

Here you go start to finish... kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@naefaust581]

Could you show how to cut the vinyl. A printing service in my area told me that I cannot cut a vinyl design by hand. So I have to have a special cutting machine and heat press?

[@HeartHustlePrinting]

Here you go.... . kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@arsyilazyrafalfares2909]

Wow Amaizing

[@HeartHustlePrinting]

Thanks for watching Arsyil.

[@arsyilazyrafalfares2909]

@@HeartHustlePrinting 🍗🍗🍗🍗🍗

[@reneew8082]

Great teacher thank you

[@HeartHustlePrinting]

No problem. Thanks for watching Renee..

[@lennyhipp]

seems like a LOT of work for HTV. considering all the labor involved, isn't it easier just to do it as a plastisol transfer?

[@HeartHustlePrinting]

It was a Hustle back then so we did what we had to do.... I then got into Plastisol Transfers and now were screen printing..

[@libertyjoseph8523]

You are such an inspirational person. Could you please recommend a printer to start off the printing business and maybe why you recommend it Lol.

[@cherylbrownlifeexposed3926]

HEYYYYYY.... I used to binge watch this video when I first started... still haven't really tackled more then a 2 color process like I should... Have a great night

[@HeartHustlePrinting]

Your so awesome Cheryl!!!! Thanks for all the support...

[@dannygonsalez27]

When layering the vynil,does the shrinking leaves any gaps.cause i had trouble with a design when layering cutouts.it keeps giving me a gap where the color of the shirt also comes out.how do i work with that.

[@HeartHustlePrinting]

All depends on how you layer vinly. Watch this video on how I cut my vinyl so it wont show gaps.. kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@charliesamples9376]

Yo bro that was a tight video. I learned alot.

[@HeartHustlePrinting]

Thanks Charlie. Make sure you checkout other videos. Alot more info on my ch.

[@sinandts4837]

Hi can you please tell me how you do multi layer design with the Vinyl ????

[@belindagriffin4936]

this is nice you did an awesome job

[@HeartHustlePrinting]

Tks!!

[@foundrylabz]

Te quedo chingona! Me gusta!

[@soilderoflife8940]

How did you protect the back from the heat while pressing the front

[@SwinkMediaHouse]

Quality on point!

[@HeartHustlePrinting]

Thank you!!!

[@lymaricabrera7525]

Can you tell how you did the layering so outline of each piece made easy?? Which software and cutter and the steps (method) you used.

[@HeartHustlePrinting]

Watch this vidoe here. I show from start to finish. I use LXi expert.. kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@alexchavez8764]

Thanks for the vid! Helped this newbie out

[@HeartHustlePrinting]

Awesome. Watch some of my new stuff go more into detail. Also Subscribe for our 15000 heatpress giveaway..

[@riganyanga2526]

Nice work keep it up

[@HeartHustlePrinting]

Thanks for watching!!

[@laughingthrushmusic5269]

Would it be possible for me to pre-layer all the colors on the transfer paper then press the multi color image one time?

[@HeartHustlePrinting]

No because the carrier sheet will get in the way when layering.

[@gabornicu7058]

Does it hold up to washing???

[@bobbybuick]

In the design software tell me how you make the borders and keep from layering underneath or remove the cemter

[@HeartHustlePrinting]

Hey Bobby here is the perfect video for you.... Thanks for watching.. . kzbin.info/www/bejne/fHu5faZ_bt5-kJY

[@railbuilderdhd]

Great video. Thanks for posting. Can you tell me why you didn’t overlap the vinyl? You said either way didn’t matter but why choose the way you did. Thanks.

[@HeartHustlePrinting]

I choose that way because I like to get a good contact on the vinyl on the garment.

[@railbuilderdhd]

Heart & Hustle Printing Yes, you mentioned that and I wanted to ask if that make the transfer last longer. I would think but I know nothing about this. Very interested in knowing all about it. Thank you.

[@HeartHustlePrinting]

I just pressed some transfers in the video I pressed today check it out..

[@gostyjose6823]

I'm about to give up, all i do it does not cut the vinil, not sure what to do. I try different settings cut an nun

[@HeartHustlePrinting]

Whay type of vinyl a d vinyl cutter are you using?

[@UnKnown-jp1bv]

Question, does each quick press of each layer cause the adhesive to slowly cook away? If you had 3 layers and did each layer at 5 seconds (15 seconds total) then you did the final press 15 seconds that is almost 30 seconds of heat on that vinyl. I have read forums and blogs and some say that you can actually cook the adhesive OFF or away from the vinyl causing it to peel/come up after a few washings. Is this true?

[@HeartHustlePrinting]

I have never had this problem.

[@CarlosGonzales-ly8dq]

I’m curious if you can put all the vinyl pieces on a single transfer sheet, after the cuts. Then press it all as one? Overall just keep rockin’ it. You do great work and inspired me. Thanks

[@HeartHustlePrinting]

That would be close to imposible bc you would have to peel all vinyl and reapply vinyl to a clean sheet. Thanks hope everything goes good... Let me know if you ever need info on anything..

[@CarlosGonzales-ly8dq]

Thanks I appreciate it.

[@electricboogeyman5855]

Hello Heart and Hustle, I just purchased my first vinyl cutter recently. The heat press has been ordered, now all I need is reliable Heat transfer vinyl. I was wondering what HTV you use in this video. Great video. Instant subscribe.

[@HeartHustlePrinting]

Boogeyman thanks for wat hing and showing your support by subscribing. I like two different types.. I like the bflex Gimme 5 and thermoflexplus. Here is a link to Gimme 5 vinyl. b-flexamerica.com/?ref=4 For thermoflex plus you can check Signwarehouse.com or Amazon.. Let me know if you ever need anthing.

[@electricboogeyman5855]

@@HeartHustlePrinting thanks for the quick response! I'll definitely let you know if I need anything else. I hope these are affiliate links. I am about to order 10 yards of gimme5.

[@HeartHustlePrinting]

Yes sir!!!! I always try to answer all question super fast.. It is an affiliate. Good this about Bflex is if you don't like it send what you have left and they will refund your money. Save you some time when pressing. Its hard to believe but it presses in 4sec....

[@electricboogeyman5855]

Wow, that is the best thing I've come across today. Glad your channel was in my recommended videos. I'll keep in touch.

[@HeartHustlePrinting]

@@electricboogeyman5855 Anytime!!

[@kHoPhAe]

Beau-ti-ful!

[@HeartHustlePrinting]

Thank you KhOpHaE!!

[@matthewfabing9405]

Awesome piece, much appreciated

[@HeartHustlePrinting]

No problem. Thanks for watching.

[@revenge680]

Is there anything you can do to prevent the first layers you press from melting into the garment further as you press the additional layers? I'm having an issue where the first layers become very glossy after multiple presses..

[@HeartHustlePrinting]

Just give it a quick press. When pressing multiple layers dont give full press till last peice.

[@revenge680]

@@HeartHustlePrinting Awesome, Thank you! I really appreciate the help.

[@vinceooo1]

which font did you use thanks Vince

[@pkilla617]

Wow great job man that came out dope..

[@HeartHustlePrinting]

Thanks man!!

[@garyz777]

That was awesome! So that was vinyl that you pressed onto the shirt? Looks like fabric. Can you wash and dry this sweater now or dry clean only? Again, thanks, you are a real artist!

[@HeartHustlePrinting]

Thanks for watching Gary. This sweater has been washed and dryed several times now..

[@ntroxell83]

How do you keep tjat stuff to stay on when u wash n dry in luadry. i made shirt with heat press n i washed shirt after a week n the letters pealed off i wash shirts n cold water and then i dry on low so they dnt shrink .so am i doing it wr9ng or what . i like the actual water based ink printing with screens its better qaulity to me and im told it dont come off as easy so im going to try both ways when i get everything n mail and i guess i will see but your hoodies look great.

[@Chuccy713]

I think it depends on the transfer paper you are using...Like Avery brand its tends to fade of peel off.

[@Lordblanca]

Great work.

[@HeartHustlePrinting]

Thanks!!!

[@beagledad2478]

Great work man. Made it look easy. I noticed you do about 157 temperature where other places I see 315-320. I'm wondering what's best thanks. I'm gonna be subscriber #1,000 😎✌️

[@HeartHustlePrinting]

Nice I been waiting on it to happen!!!! Thanks for being number 1000 and for support!!!! As for the 157 mine reads in Celsius. Didnt know at the time so i jave to convert to ferignhight... Alao when you purchase vinly it shiuld come with recommended temperature and press time..

[@beagledad2478]

@@HeartHustlePrinting oh I see. Thanks for getting back to me and thanks for the videos. Congratulations on 1k subscribers sir 🎉🎉🎉