Great video! I want to use the ACPworkbench with the Up2Stream Mini. For my case I need to limit the output volume (for instance to 60%). Should I make these settings on: (a) ‘Audio Module’ tab, under ‘Volume control’ (which slider in this section)? (b) ‘Audio effect’ tab, under ‘Main EQ’ and then ‘Pre-Gain’?
@Arylic Жыл бұрын
Option b😁😁
@deltastories6859 Жыл бұрын
Great product, chaps. However. delay / time alignment for each channel is a vital feature currently missing. I hope it is coming soon . . . Also, in the video, the only panel you do not click is the most important one: showing extended options for PEQ on each channel - I have seen that in this section there is the possibility to set cut-off frequency, and I was hoping for individual channel delays, too. As others have said, a four- and six-channel version would be great.
@Arylic Жыл бұрын
Thanks for the detailed feedback. Will manage and report to our team😁 As for the delay adjusting you can try the tools here: forum.arylic.com/t/add-airplay-to-your-android-phone/180 BTW Black Friday SALE may coming soon! You can refer to this link for more info: www.arylic.com/pages/activity
@vladi_ed Жыл бұрын
@@Arylic the author was talking about delay for each channel (left, right, subwoofer).
@cmdesteves2 жыл бұрын
I bought the software, I have a S10 preamp and UP2STREAM V1.0 and I can't get the software to work, I've tried several data cables, but to no avail. It always gives USB disconnected
@Arylic2 жыл бұрын
Hi Carlos, I advice you send a mail to our customer service. They will help you figure out the issue. Some products that release on 2018 or 2019 is not supported this feature.
@boppos3 жыл бұрын
Did I understand correctly: when I buy a new computer or reinstall windows I need to rebuy acp workbench?
@Arylic3 жыл бұрын
The key is memorized by the harddrive, so if hardrive clear the data the registration history will disapeared
@hyrule24863 жыл бұрын
@@Arylic And if i clone the drive?
@Arylic3 жыл бұрын
@@hyrule2486 The license is locked in the driver, so if the driver memory or record will be erased, then you need a new license key.
@Jasonv8z28 күн бұрын
Great product. Would like to see 1st-4th order high/lowpass crossover as well as delays for each channel as others have mentioned. This way the board can be used to crossover tweeter and woofer in your speakers. This would be more useful than the eq presets and compression limiter functions.
@ford154610 ай бұрын
It doesn't have the usual 10. 15. 30. band eq mode??? does it cost anything to use the software.
@ashyouknow74204 ай бұрын
Yeah it costs 20 bucks
@trei2unu2 жыл бұрын
In the custom EQ section, is it possible to also set the Q, Gain and Fc by clicking on the values? Also, any plans on making a 4 channel amp so it can be used as an active crossover between the tweeter and woofer as well?
@zach4384 Жыл бұрын
You can use two Up2stream mini boards and connect them together in the app.
@caioferrari3 жыл бұрын
You sell a software for someone that bought your product? This is dumb
@Arylic3 жыл бұрын
Hi Caio, sorry for your bad experience. But we for this software we have lifetime maintenance and update, so we need to spend time and cost on it. Hope you can understand.
@caioferrari3 жыл бұрын
@@Arylic it’s hard to understand. I bought an A50+ and it doesn’t sound good. Compared to my old AB amp it sounds sharp, too much highs. terrible. Would be essencial to equalize it and try to improve its sound but…. I have to pay extra for it
@Arylic3 жыл бұрын
@@caioferrari Our amplifier is class D amplifier. For the sound issue you can write a mail to info@arylic.com. We will help you check if there is an issue or not. If yes, we could send a replacement and refund to you. Thanks
@ftt-prod3 ай бұрын
@@caioferrari You can find it for free ;) Some links when it was free are still alive :) And no key needed
@dannyaustin84 Жыл бұрын
Hi. My version (just purchased) of APC Workbench doesn't have the options to allow me to adjust EQ for L + R separately. I need this function to act as a crossover. Do I need to update the firmware on my board? Any idea of how I can get hold of the bin files?
@Arylic6 ай бұрын
Hi Sir, you can send your firmware version and the screenshot of ACPworkbench to our customer service mail: info@arylic.com. Or if you can send the video that would be great. BTW, what is your product model, some models can download GO CONTROL APP for L/R balance.
@andreimelinte11366 ай бұрын
Hello, how do you proceed if the program will not save the settings? After restart of the device the settings are gone. I've tried to use index 0 to 6, also i did some logs and i saw that cominication is done but there is no writing on the chip itself for using downloader and then save configuration to flash
@SamuraiGuy3 ай бұрын
I'm having the same problem. Did you find a solution?
@donaukanal942 Жыл бұрын
Hello! Is there a way to connect the upstream board wireless to the pc
@janschmitz25833 жыл бұрын
Is there a way for time alignment between left, right Channel and sub? ( Using the 2.1 AMP)
@Arylic3 жыл бұрын
Hi Jan, thanks for your nice feedback. We don't have this currently, but we plan to do this in future update. Thanks
@RatsM77 ай бұрын
@Arylic Did you?
@IainMacUK6 ай бұрын
Please update your info. I believe this Windows software is compatible with your BP50. Can it do base management on the sub output??? Thank you.
@Arylic6 ай бұрын
Yes, BP50 is supported, you can adjust the sub channel frequency.
@IainMacUK6 ай бұрын
@@Arylic That's good news. Thank you. Can you band pass the fronts? So low bass to the sub and everything else to the fronts? Full bass management...
@pmsrodrigues3 ай бұрын
I actually think this is a great tool, but it is missing a trick: using a microphone to create an EQ curve to help correct for speaker and room inaccuracies. Even if imperfect, it would go a long way to improve things.
@Arylic3 ай бұрын
Hi Sir, thanks for your very great idea! Currenty our devices is not well to support mic, but we already in progress to plan some products with mic features:)
@pmsrodrigues3 ай бұрын
@@Arylic I meant to use the microphone of the computer running ACPWorkbench, or preferably cheaper external mic, and placing it in the listening position. Shoot some test tones which you capture and analyze. Generate EQ curve. Profit.
@thesheldonroth2 жыл бұрын
4stream seems much worse. Can no longer control all of synchronized speakers volume at once... Only one speaker at a time
@Arylic2 жыл бұрын
Hi Sheldon, you need to update all units to the newest firmware then the issue will solved.
@dannyaustin84 Жыл бұрын
@@Arylic Where can I get updated firmware bin files from?
@soyusunk6 ай бұрын
How to setting bluetooth delay for Up2stream mini board
@Arylic6 ай бұрын
You can achieve the goad by 3rd party app, check this: forum.arylic.com/t/add-airplay-to-your-android-phone/180/9
@soyusunk6 ай бұрын
@@Arylic Can not setting in ACPWorkbench ?
@Amthanhvadoisong5 ай бұрын
decryption key please! how to have!?
@ashyouknow74204 ай бұрын
Buy from their website
@Andreas1232112 жыл бұрын
When I try to save the configurations to flash, NOT all the configurations are saved. However, I only try to save two audio effects, and it can only save the "Harmonic Exciter" configurations but NOT the "Virtual Bass" configurations. The "Save Configurations to Flash..." pop-up is also pretty confusing, but I use the default settings when I save. I have the "Up2Stream mini V3". Please help. =) Otherwise, I love the module.
@Arylic2 жыл бұрын
Hi Andreas, this is a known issue for saving the virtual bass. Will fix in future update
@Andreas1232112 жыл бұрын
Okay, thanks. Do you know the time frame for when the update is available via the 4stream app? :)
@Arylic2 жыл бұрын
Estimated on March
@Andreas1232112 жыл бұрын
@@Arylic Hey, the firmware update you said was estimated March has still not been released as it seems? I have the Arylic mini V3, but does that even supprt the new update 4.6.415145?
@Falko873 жыл бұрын
Can you please make a video on how to activate the "SPDIF IN" module?
@Arylic3 жыл бұрын
Actually you can find the answer in 11:30, change the spdif part to spdif in.
@Falko873 жыл бұрын
@@Arylic I already knew that. The problem was, that the Toslink-input not worked properly (sound distortions). Solution is: DO NOT USE THE CABLE THAT IS SHIPPED WITH THE SPDIF IN MODULE. You can only connect 3 pins from the SPDIF module to the Up2stream mini -> "SPDIF", "GND" and "VCC_3V3". The other 4 pins are useless for the SPDIF IN and will cause electro magnetic interference (distortet SPDIF signal) if connected to the Up2stream. ;-)
@zarster5 ай бұрын
Very good video! Will for sure get the software. Need to figure put how to use the GPIO to CTRL put when input is detected
@TuanLe-gh9kv2 ай бұрын
which DSP ic do you use on the PCBA?
@Arylic2 ай бұрын
Hi, it varies with different products, if you are asking for business purpose you can mail us: www.arylic.com/pages/b2b-oem
@cBoTy6e3 жыл бұрын
Arylic S10. Treble and Bass are incorrectly adjusted after the last update (4.2.9326.24)!!! How to return to the previous firmware ??? Everything worked correctly on it.
@ivosimba4966 ай бұрын
How use they firmware update. How to. Create el. File.mva please help me
@nthy_06843 жыл бұрын
hi friend have delay for each chanel /???
@Arylic3 жыл бұрын
about 20ms, it is hard to hear that if you are listening music
@prasanthgnАй бұрын
Does it support HD Dac upstream the airplay2 board. I bought it a while ago
@ArylicАй бұрын
Sorry that Up2stream HD DAC does not support web control or the ACPWorkbench Audio Effect Tool.
@prasanthgnАй бұрын
@@Arylic would it be a future feature?
@ArylicАй бұрын
@@prasanthgn Thank you for your advice and we our tech team will consider this.
@SamuraiGuy3 ай бұрын
Is there a way to make my B50 remember my EQ settings after it turns off or goes into standby? I don't want to apply the settings every time I want to listen to music. I don't even want to have my computer connected to it at all. Surely there's a way to save to the device, right? I can hear it changing when I mess with the app, so I know it's affecting it. It just resets every time it goes to sleep or turns off.
@Arylic2 ай бұрын
Hi, you can save that following EQ>Custom EQ>select the drop down list> Add custom>Save.
@SamuraiGuy2 ай бұрын
@@Arylic that's how I did it from the app, but that's only a graphic EQ. Is there a way to save the PEQ settings from the ACP Workbench app to the device?
@Arylic2 ай бұрын
@@SamuraiGuy Yes, please see 12:58
@SamuraiGuy2 ай бұрын
@@ArylicI completely missed that part. Thank you so much!
@danielpeterson54047 ай бұрын
how to delay channels 1 2 and subwoofer
@JoséVillagómez-d1hАй бұрын
is it for the H50?
@ArylicАй бұрын
Hi, it is only compatible with Up2stream Series(except Up2stream Amp Sub), S10, SA100
@lancebyphone313611 ай бұрын
Please How to adjust name of MV silicon
@haha126783 жыл бұрын
nice video! but can you also explain the audio module page
@Arylic3 жыл бұрын
We recommend do not change the settings on that page.
@arielfernando39163 жыл бұрын
I realize I am kinda randomly asking but do anybody know a good site to watch new series online?
@shilohjuelz24783 жыл бұрын
@Ariel Fernando i use FlixZone. You can find it by googling :)
@soyusunk6 ай бұрын
How to change soundsystem to other name for device ?
@Arylic6 ай бұрын
It is pretty simple! open 4stream APP>click device settings>rename and you are done!
@soyusunk6 ай бұрын
@@Arylic I user bluetooth with a car only
@Arylic6 ай бұрын
@@soyusunk Which model do you have? For WiFi model you need to use WiFi to change the name. You can try use a phone as a hotspot.
@stanislavtodorov87052 жыл бұрын
According to the provided manuals for up2stream Mini/Pro v.3 , the boards are running in MASTER mode. If I want to output the I2C signal from the Mini/Pro boards to another device (in my case ADAU1701 dsp), the connected device should be in slave mode. Is it possible to set the Mini/Pro to work in SLAVE mode with this software? May be frin the MODE dropdown menu in the I2S0 tab. And then from SETTINGS -> MCKL SOURCE (GLOBAL) to select MCLK IN0 instead of PLL Clock1? If this works, I will be probably able to set the ADAU1701 as a master and output it's MCLK signal (12.288MHz) to the Mini/Pro, which would be much more convenient for me. This is the only thing which stops me from ordering an up2stream Mini 3 module. Best regards!
@Arylic2 жыл бұрын
Hi Stanislav, this is not available.
@martifabregabueno99863 жыл бұрын
Can be installed on an external drive?
@Arylic3 жыл бұрын
Sure, just make sure to run on Windows system.
@martifabregabueno99863 жыл бұрын
@@Arylic So it could work on 2 different computers? Or will only work on the first one where it was used? I currently have one AMP but I am planning to get a second one in a completely different location and I want to be sure if I can use the program for both of them without needing a laptop or moving the AMPs from one location to another. Thanks
@09ThunderOne Жыл бұрын
If I save a custom EQ, will that custom EQ be in the phone app afterwards? Thanks
@Arylic Жыл бұрын
It won't sync to the app. But the number is correspond to the numbers of remote preset content.
@yurianhuizing23522 жыл бұрын
Hi, the Up2stream pro v3, How can i get a output pin to give 3 volt when playing audio? And turn off when there is no audio
@Arylic2 жыл бұрын
Hi Yurian, your questions are related to tech issues. Could you send a mail to info@arylic.com? We will transfer to our tech team to help you.
@hyrule24862 жыл бұрын
Hey how can i use de digital out?I connected to my onkyo but there s no sound??Thanks.
@Arylic2 жыл бұрын
Hi Filme, please contact our support team: info@arylic.com
@alexdj17422 жыл бұрын
can I convert the input line signal to “phono” line? (turntable) greetings 😅
@Arylic2 жыл бұрын
Sorry this is hardware related which is not available😂
@HalRockwell Жыл бұрын
So, if I buy a new PC, I must buy the software again?
@Arylic Жыл бұрын
You can send a mail to our customer service: info@arylic.com. Once we confirm your order we will send you a new key.
@lancebyphone313610 ай бұрын
Please how to adjust name of bluetooth
@Arylic10 ай бұрын
It is easy. For WiFi line products, open 4stream APP>device settings>Rename For Bluetooth line products, open GO CONTROL APP>settings>Device Name.
@Falko873 жыл бұрын
What must I do, to activate the volume encoder board? I plugged it to my Up2stream Mini V3 but it doesn't react. 😕
@Arylic3 жыл бұрын
Hi Falko, I advice you can send your wiring and the screenshot of your ACPWorkbench too to our forum, we will check and let your know.
@Falko872 жыл бұрын
@@Arylic I already asked in the support forum. Everything is connected properly and the ACP settings were corrected (reset to standard). Now I can only turn up the volume. Turning volume down activates the bluetooth source (wtf?!). Pushing the volume knob does nothing. I hope some one will help me. :-(
@Arylic2 жыл бұрын
@@Falko87 I recommend you can feedback your problems in forum post continuously. Our pro engineer will give you the best suggestion there to help you.
@TuanLe-gh9kv2 ай бұрын
I can not save a configuration after change setting
@Arylic2 ай бұрын
Please check 12:58 for save configuration settings
@TuanLe-gh9kv2 ай бұрын
@@Arylic pls help to explain more clearly?
@TuanLe-gh9kv2 ай бұрын
@@Arylic I have did as your instruction but when power off it can not save and remember.
@Arylic2 ай бұрын
@@TuanLe-gh9kv Hi, if you still cannot solve your problem, please kindly contact our service at info@arylic.com and they will help you out.
@TuanLe-gh9kv2 ай бұрын
@@Arylic Hi admin, I only install portable sofware version, not official software by .exe. Can you share me official software?
@nordioale2 жыл бұрын
hello, but with the arylic mini v3 i can use also this software for set the filter? best regards