Acty Dashboard Removal

[@NFA_FUBBA]

One thing about the cigarette lighter wires is that in order to remove it you 2:55 you unscrew the gold colored cap thing over the cigarette port counter-clockwise with a pair of channel locks and it unscrews, comes out the front with the bezel ring and its very easy to unclip it afterwards. Also the tachymeter cable may hang up on you so make sure that is unplugged along with the cluster controls

[@94Greenbean]

I just gotta say this is fantastic! The simplicity is startling when your used to American made vehicles. I’ve been a Honda person for over 20 years and worked for Honda for 18 of that. I wish I had known about the Kei vehicles back then, I’m having tons of fun learning now and slowly saving towards an Acty, Carry or Sambar of my own. Haven’t decided but I’m 6’4” @225 so the decision may be made already, lol… Keep up the great work and appreciate you doing all you have done! Love the website!!!

[@willpowered9882]

We appreciate your support. Each brand has its pros and cons but I like Hondas overall and at 6-1 225 the fit is just fine for me.

[@Magicsizing]

I'm around 6'5" and fit if you have longer legs like me it may be an issue my knees sit a couple inches from the dash, from what I have heard is the vans have more room I've never sat in one before so I can't confirm

[@minpinracing8462]

Once again , thanks for the video. I just got my 1992 Honda Acty deliver yesterday . I was planning on re-painting all my vinyl/plastic interior dash and door panels.

[@awc2305]

Will be trying this today so I can sand and paint the dash

[@JeremyGreen]

Great walkthrough. One addition, the Honda logo in the wheel pops out then you can use a 19 mm (or 3/4") socket to remove the steering wheel without removing the horn button. Much easier, at least on my truck.

[@willpowered9882]

Just tried that out and wow, so much easier 😅

[@JeremyGreen]

@@willpowered9882 yeah, I didn't think to check until after I had removed the wheel, but I realized before I reinstalled it. I should have noticed before, it's really similar to my '87 crx.

[@MOTTOTROOPER]

@@willpowered9882 I was wondering why the Extra work

[@MrAltaylor44]

Great DIY! Now I'll have my dash out in a flash.

[@gavinward7221]

Awesome video! Just what I needed!

[@SharkAttackSkinder]

Great video. Filmed and edited. Very thorough on your end too. Nice work!

[@Thirteenwindows]

Putting all that back in is gonna be fun 💀

[@adamwking]

this video is a life-saver!

[@awc2305]

great video man

[@dsegundo]

There's no way to take out the two air ventsfrom the middle of the dash?

[@FUBBA]

use a tiny flathead and lift the little latch on the inside its c shaped

[@ThaDirtyVicar]

Great video, well done. Thank you.

[@bhriftzy5451]

Do you know where the fuel pump relay is on this model?

[@LennyDream]

Great video!

[@deedubb1815]

Are they really phillips head or are they JIS drive?

[@xplodx000]

No need puller to remove sterring?

[@heightssoftwash708]

If the spedometer is stuck at 99999/100000 is there a fix or does it need to be replaced?

[@kianarvi]

Will be referring to this video for my removal. Appreciate it so much! Was wondering if you have an Acty van and know how go remove the door panel for the back seat?

[@MOTTOTROOPER]

1:33 *THE H IN THE STEERING WHEEL IS REMOVABLE AND ALLOWS ACCESS TO THE 19mm NUT* So everyone else can benefit. No need for all that in the beginnin

[@joycem751]

Do you know the size in inches or centimeters of the speed? The top shell of the clear plastic? I’m trying to get a clip mount for the dashboard but I want to put it where I can see clear but I got one and didn’t go in because of the round cover protector. I don’t have my van rn because it’s getting some work on, but it’s a Honda Acty 1997. If someone could help me I would be super grateful 🙏🏻 thanks! If it helps it’s a HH3

[@masahiro7499]

パネライのほうに目が行ってしまいましたがな😮良い時計持ってまんね😊