AD9833 Programmable Waveform Generator (part 2)

[@electrolabs337]

Just beautiful. Thank you for your time and effort.

[@AnasKuzechie]

Thank you

[@mesocodecanada8974]

Excellent project. But the more important is your excellent video, the time saver, clear, no trash presentation you made. Thanks for sharing. Is it possible to replace the display with an oled that can display waveform together with data..something like a mini alternative for the oscilloscope?

[@AnasKuzechie]

Thank you for your feedback. I like to keep my tutorials concise. Yes you can use an OLED, and there are videos on KZbin demonstrating this. Maybe I'll do that in a future video. Thanks again.

[@cbezanis]

Thank you for another awesome project, you keep making them and I'll keep building them! Just a heads up, the block diagram shows the MAX7219 DIN going to D8 and CLK D7. I caught this when you went over the code and mentioned the correct assignments of DIN D7 - CLK D8.

[@AnasKuzechie]

Thank you for your feedback.

[@snapo1750]

is there a way to create sinewave frequency from 0.00001Hz - 1 Mhz (variable) ?

[@samj1012]

Excellent project thumbs up 👍. Next u may add a lcd screen to show waveform. Also you can replace 9833 with 9850 giving wider frequency output range.

[@AnasKuzechie]

Thanks for your feedback. I'll checkout the 9850.

[@samj1012]

How to set the frequency by keyboard instead of pot ?

[@RajeevKumarSage]

Can this ic generate arbitrary waveform ? If not then which ic will be suitable for arbitrary waveform 😊

[@albertoadrian9122]

gracias excelente .

[@yousaftoki1599]

Awesome project sir....output pin show please..

[@andreabaldini7073]

beautiful! the frequency can also be obtained in Mhz example from 1 to 5mhz? or higher? Thank you so much

[@AnasKuzechie]

Thanks for your feedback

[@FantaBH]

And again useful but still not useful, where is link for ad9833.h library which you use, as one included with Arduino ide software does not recognize few commands like it is gen.EnableOutput(true); Please I seen others asking for same however never seen answer from you .

[@mafiaelektro9079]

Please with 2x16 lcd

[@ka-techarastrmac633]

Hi Thanks for your sharing. Is it possible with this code to increase frequency to some points using potentiometer or rotary encoder? For example like 1000, 1500, 2000, 2500 or other frequencies which we want. Also ı want to give name for each frequency. Bee for 1000, spider for 2000 and etc

[@AnasKuzechie]

Thanks for your feedback. Yes it’s possible. Perhaps a future video.

[@ka-techarastrmac633]

@@AnasKuzechie Thanks for your answer. Future is relative. I hope it is near future.