New Products 8/31/2022 Featuring n00ds - Flexible LED Filament - 3V 300mm long!

[@iron_bro]

So many ideas for n00ds, they're super cool!

[@MarcoZamora]

Any plans for a cool white version? I want to build an illuminated desk magnifier with the light in a ring around the lens; these are great and just the right size. But I want the light temperature selectable by PWMming between a warm and a cool white set.

[@iamjiroe]

Did you ever find one? I can’t find any cool white version

[@Dsschuh]

OMG I was actually getting dizzy from the flexible noodle going around and around your finger over and over and over and over and over. Thank you I love the product!

[@howardbaxter2514]

Very cool. Not sure what I would use those LEDs for, but I’ll have to keep them in the back of my mind.

[@N8VNicoya_Django]

Dioramas

[@BrianB2579]

We will never appreciate how "LEDs" have changed our world. It's used everywhere today. As to the flickering "NEON" signs we see in old movie scenes and not to mention Los Angeles main street at night in the 70s. I will use the Noods to form the shape of my house number so it can be seen in the dark as one example.

[@barthchris1]

What’s really not appreciated is the invention of InGaN blue LEDs. All white LEDs are actually Blue LEDs that are under a layer of various phosphors which luminesces different colors , mostly whites depending on how which phosphor is used and what ratio they combined.

[@echolips]

Shuji Nakamura The Nobel Prize in Physics 2014 Born: 22 May 1954, Ikata, Japan Affiliation at the time of the award: University of California, Santa Barbara, CA, USA Prize motivation: “for the invention of efficient blue light-emitting diodes which has enabled bright and energy-saving white light sources”

[@jonathanchampagne7683]

Could you sell these with an appropriate way to power them?

[@davidharms3562]

Highlight of my week! Totally dig the high quality noods! Thanks AdaTeam! 👍🏻

[@parrotraiser6541]

The red nood would be a good illuminator for an instrument panel.

[@ScottGrammer]

Would be great for replacing the lights in audio VU Meters. Would have to dim them down a lot, though.

[@raddaks2039]

I bought some yesterday without realizing they were new lol. Really neat product!

[@someguynamedpie]

Ooooooo. Any possibility of getting some larger n00ds? It'd make an awesome necklace/pendant. Also, you should put the current draw on the product page!

[@daviderickennedy2194]

I don't think that will happen (not enough need) because it's too easy to splice them. I used supper thin, soft, clear heat shrink.

[@jabulaniharvey]

​@@daviderickennedy2194 sign companies and craft folk might be markets

[@jimleonardson4268]

If noods was spelled in New Yorker magazine style, would it be noöds? Pronounced like cooperate, coordinate?

[@sjm4306]

I kinda wanna buy a bunch in different colors and design a little 3d printed base to make little "neon" signs with them.

[@Nettle314]

Do these guys need resistors? I had a sample once that just burned when I connected it to a 3.7v Li-ion battery

[@bannerman100]

Yes, you need a resistor (or a very well controlled supply voltage). LED devices need to be current controlled. If the LED needs 3V at 50mA, then to power it from a Li-Ion battery (which is 4.2V when fullly charged), then the resistor must drop 4.2V minus 3V, which is 1.2V. R = V / I, 1.2 / 0.05 which is 24 ohms. (For convenience, you can use a common 22 ohm resistor as it's close enough.) I recommend that you check out the many free basic electronics online courses.

[@puffthecatpuff8931]

Can I use these to run out old batteries, that I refuse to throw out?

[@glowytheglowbug]

haha great name! saw these on aliex too a while back, loving them!

[@MMuraseofSandvich]

Well... I was looking for something to light up a lightsaber...

[@crackwitz]

n00ds might not light it up much (guessing here) but they will probably extend it

[@bannerman100]

Absolutely ideal, as they will give uniform brightness all the way along. You might want to put in 3 or 4 strips to get enough brightness. And make sure they are all angled outwards around a central rod, and covered with a clear or translucent tube for protection.

[@evanbarnes9984]

If I go to your website right now and place an order, will you... send n00ds?

[@3DJapan]

Looks like the n00ds are all out of stock now.

[@stevebabiak6997]

Holiday color themed for various holidays - for example orange and black for Halloween, blue and white for Hanukkah, green and red for Christmas, red and white and blue for 4th of July, etc.

[@bannerman100]

What a Brilliant Idea ! Hey everybody, where can I buy some really, really, really bright black LEDs for Halloween ? (Sorry Steve, but I just couldn't resist that !-)

[@stevebabiak6997]

@@bannerman100 - they use a dark purple, but there were some that used a dark green too. The other holidays are good though ;)

[@bannerman100]

@@stevebabiak6997 You change the brightness by just changing the current, but there can be different shades of each colour to give different effects.

[@planker]

I like the power rating for the shorties. Question; can they be ran on PWM to kind of control the brightness? .....I'm getting some anyway.

[@dcuccia]

ladyada says yes in the video - mentions it during the short element section but since these are simple led elements in parallel, presume it applies to all.

[@planker]

@@dcuccia These might be 2.7v, I think at 3v the ma might get to high. I'll just use an LDO reg.

[@FreedomAirguns]

Wish those noods were addressable and/or RGB but they look good.

[@jonblair5470]

Are these programable and controllable? Or are they just on and off?

[@planker]

I don't know how to create a good low voltage PWM circuit. my 555 stuff chokes out below 5 volts.

[@echolips]

Are they available in the IR spectrum?

[@guruprasadrr1]

Is this have RGB feature ?

[@chrislx777]

So, what the nominal Voltage and Ampere for Flexible LED Filament once again?

[@coreyfro]

Are there any NOODS with a uv component to the output?

[@ARTiFKTOR]

UV noods! This is the way!

[@TheTomar33]

What the volts rating?

[@corrhall1]

these are cool! can you power the flexible ones with a coin cell battery by attaching the connectors to the coin cell?

[@bannerman100]

Probably, but coin and button batteries have very little capacity, so they will die quickly. The smallest practical battery would be a 10440 rechargeable Li-Ion cell, with a resistor to limit the current.

[@unseeninja]

is it possible to power these with a reed switch?

[@emilypeters8888]

Rgb n00ds please would so nice to replace so many computer accessories

[@gjpiper]

How long do the n00ds last?

[@juanportillo7702]

Would I be able to use a usb to power these?

[@daviderickennedy2194]

I love these! But know the resister is more than a SHOULD, without it they just burn up. In my tests 50mA is really pushing it, not going to last long. More like 40 nor 45mA and they still look about the same brightness. Great Product!!!!!

[@subspaceanomaly]

would they burn if directly connected to a 3v button battery? like a c2032? I connect them to leds and led string lights with no problem but not tried these filament things

[@bannerman100]

@@subspaceanomaly 3V is ok for regular white and blue LEDs (usually 3.3V max), but red, orange, green & yellow LEDs take about 2V, so use a resistor. But many LED keyring torches often don't have a resistor because the tiny batteries can ony supply a tiny current (and won't last long anyway.)

[@Th3WarHunter]

Are these legal to be placed on a vehicle?

[@kroscuro]

3 volts at how much current for the flexible 300mm ones?

[@Firemk8R13]

I wanted to purchase this to make a footwell light in my vehicle so i would be drawing 12v what would I need to get the correct power to the light ?

[@bannerman100]

From a 12V supply, if its a 3V, 50mA strip, you must drop 9V. So 9V / 50mA = 180 ohms in series with the strip.

[@fatH2591]

You've been sending what???? 3:53

[@vincei4252]

Very cool. I just bought all colors of your high quality noods.

[@azimalif266]

Couldn't find the flex LED filaments in Bangladesh.

[@lawrencepietschker8473]

What resistor would I need to run these off a standard 18650 li-ion cell

[@bannerman100]

LED devices need to be current controlled. If the LED needs 3V at 50mA, then to power it from a Li-Ion battery (which is 4.2V when fullly charged), then the resistor must drop 4.2V minus 3V, which is 1.2V. R = V / I, 1.2 / 0.05 which is 24 ohms. (For convenience, you can use a common 22 ohm resistor as it's close enough.) I recommend that you check out the many free basic electronics online courses.

[@scottketcham5746]

Does it hum like L wire?

[@usuario448]

can be cut?

[@TechnoChic]

Whoa. I need to get me some of those noods. Can we dream: A world with neopixel noods in the future... (future)...((future))..... 🌈

[@ConsultingjoeOnline]

Very cool LEDs

[@crackwitz]

non-flexible? "uncooked"

[@iamjiroe]

We need 6500k white 😪😪😪

[@RJ_Eckie]

Won’t accept anything besides High Quality N00ds from this point!!

[@NiCadHeliPilot]

Well, if I ever do another night helicopter build, I know what I'm gonna be using in place of EL wire. =^/.^=

[@max10eb]

OK that was funny, n00ds, LOL

[@KwizzyDaAwesome]

How do I be you when I grow up? (am 34)

[@tyttuut]

I don't usually pay for noods, but...

[@_peaboy]

Very puny....

[@glotrim]

if your impressed with that you better get your diapers ready for GloTrim