Parametric Facade Modeling - Warmińska Shopping Gallery

[@naotoohbuchi6321]

I'm an architecture student at a Japanese university. This tutorial video is a great way to learn GH! I'd like to share this video with my classmates!

[@AdamArchh]

I am pleased to hear that. love to japan.

[@ghulabshahbuilders4304]

🎯 Key Takeaways for quick navigation: 00:06 🏢 Tutorial on parametric facade modeling with Grasshopper 3D for Warmińska Shopping Gallery in Poland. 02:30 📐 Covers voronoi diagram creation, scaling geometries, and dimension control. 05:07 🔄 Explains number remapping, bounds, and surface thickness adjustments. 12:43 📁 Concludes with transferring the pattern to the main surface for facade modeling. 16:47 🙏 Thanks for watching this Grasshopper 3D parametric facade modeling tutorial. Made with HARPA AI

[@farouktaoulilit7942]

I hope that your videos will never stops ! keep sharing new projects with us, good luck. Thank you

[@rsalelwani]

As usual, you are the best!

[@AdamArchh]

Thank you, rsalelwani.

[@manimahmoodzadeh236]

As an architecture student, it was an incredible instruction. thanks for your consideration about what we students need!🙏🏻🙏🏻

[@Wabidesigns]

Great work. 🤩 Waiting for next video 😬 👍👍👍👍👍

[@AdamArchh]

Thank you

[@dorukkepce7586]

Harika bir video daha Adem hocam, ellerinize saglik. Anlatim hizi mukemmel, ne cok yavas ne cok hizli. Diger videolari merakla bekliyorum.

[@AdamArchh]

Desteğiniz için teşekkürler. Eğitimlerin devamı gelecek.

[@aeonaces2692]

Excellent!

[@AdamArchh]

Thank you

[@zeynepdereli2801]

Super job🔥🔥🔥

[@AdamArchh]

Thank you

[@merveozen9554]

Thank you so much for the support and data.

[@AdamArchh]

Thank you too Merve.

[@namelsslol]

Good job ,keep it up 😍😍

[@AdamArchh]

Thank you

[@HeshamMahmoud92]

Brilliant .. thanks for sharing this valuable tutorial :))) Keep up the amazing work

[@AdamArchh]

Glad you liked it!

[@cr4nkk623]

Thanks you so much for your videos, they well structured and easy to understand. Thumbs up!

[@AdamArchh]

Thank you

[@sayedfazlahmadsadat3115]

Great 👍

[@AdamArchh]

Thank you

[@Matamjid68]

Wow 😍👍🏻

[@AdamArchh]

Thank you

[@usagi14days]

what a beauty❤

[@BojalilGtz]

Perfecta demostración...

[@AdamArchh]

Thank you

[@brunomarinhomonteiro3526]

Great work! Thank you for the explanation!

[@AdamArchh]

Thank you

[@Nadmad4455]

Great tutorial. Can you explain to me why in the last steps surface won't connect to move? It says "Data conversion failed from extrusion to surfaces"

[@dailyfootballpredictions9663]

This looks so easy.. i can do it with eyes closed. :)

[@AdamArchh]

This is great

[@baichunyuan4307]

Great tutorial! The final model will have a break in the seam that looks out of place, how do I fix it so that it looks seamless at 360 degrees?

[@AdamArchh]

Hi, it’s possible, i will send you a video.

[@baichunyuan4307]

@@AdamArchh wow, thanks a lot🥰

[@ycc614]

@@AdamArchh I have the same confusion,Can I have the video? thank you!

[@ycc614]

@@baichunyuan4307 I have the same confusion,Can I have the video? thank you!

[@Imitating]

Would I be able to get the video as well?

[@vladrad4228]

I have a problem on last stage (surface morph): geometry lost "extrude"/the geometry is displayed without thickness and baked without thickness as well

[@RobertoGarcia-lz1st]

Eres tan increíble!!!!!! 👏🎉

[@AdamArchh]

Gracias, amigo

[@jennifer3362]

Perfeckt

[@AdamArchh]

Thank you

[@utkarshanand209]

1. Data conversion failed from Extrusion to Surface this error is showing while connecting geometry to surface @ 13:36

[@utkarshanand209]

also not able to create facade as shown after the error

[@AdamArchh]

Hi, do you use Rhino 8?

[@utkarshanand209]

@@AdamArchh yes i am using version 8

[@kushribadia1991]

Same problem.

[@ShriyamShukla-m1l]

thankyou

[@ferdipauner8674]

awesome video...all ur video broo..

[@AdamArchh]

Thank you

[@ЕвгенияОшуева]

I am fond of your videos. They are really cool! I would like to get help. I want to put this pattern on my own not square surface but patter fill it only as square part. What I do wrong? Also, I want to cut with blade already baked shape it goes wrong. The mistakes appear...

[@HabibaEhab-je5bz]

The tutorial is very helpful, i just had a question, how can u add an opening to make it look like a door?

[@rommel_e_romero_alva]

Thank you sifu

[@AdamArchh]

Thank you Po

[@mohammedfaizan4345]

amazing Adam, but I have a question, how to blend the beginning and the end of the serfice ... cuz at the final result there is a line the split the shapes... U know what I mean .. right?

[@ZAKarchitects]

Brilliant

[@AdamArchh]

Thank you

[@룰루-g7b]

Hello. Thank you for your good video!🙂 I'm trying to pull it out with a 3D printer, but the object is thin. How do I increase the thickness of an object in grasshopper?

[@AdamArchh]

Hi, download Pufferfish plugin. Make use offset surface to give thickness. - food4rhino.com/en/app/pufferfish

[@ararena4075]

great job

[@AdamArchh]

Thank you

[@williamstorruco5829]

When I put surface on the minute 13:15 , it turns red and it doesn't work, what should I do?

[@AdamArchh]

If you are using Rhino 8, you might encounter such an issue

[@sunilmk6787]

How can get the software for beginner's ?

[@AdamArchh]

www.rhino3d.com/download/rhino-for-windows/evaluation

[@alisalim80]

Great video as always!! I've been searching for a tutorial for KAPSARC building , It would be great if you can a video demonstrating that. Thanx in advance

[@caganmutlu1634]

If we are going to change material of layer 2 to glass, can we make glass panels on the facade?

[@AdamArchh]

Of course.

[@gauravchandragoswami4144]

I couldn't store the extruded geometry to a surface. Am I missing something?

[@AdamArchh]

Hi, do you use Rhino 8?

[@gauravchandragoswami4144]

@@AdamArchh Yes... Is there any alternative way? I tried baking the extrusion and exploding it and joining it back but the surface module doesn't take a polysurface either...

[@AdamArchh]

@@gauravchandragoswami4144 - This script for Rhino 8 - drive.google.com/file/d/1X7qDhI_GPIVtdLBdujMLMEnIXDi_SbWa/view?usp=sharing

[@gauravchandragoswami4144]

@@AdamArchh Wow Adam... Hope to meet you someday in the future...

[@gauravchandragoswami4144]

And thank you so much!

[@cgimadesimple]

super useful

[@nwen_b.b56]

Hi Thank you for your tutorial. In case I want to embed that pattern into an existing geometry I did in Rhino, which command should I be using instead of making a geometry in Grasshopper like you did?

[@rahimbelabbes4806]

thank you sir!! , just a question how can i know all the fonctions ? how do i know how it works can you give a method of learning

[@rajendrameena150]

How to scale all voronoi as a whole to form a border after scaling from individual origin.

[@saraspina1710]

Why the comand surface is red?

[@LJ-jp7yt]

We also can Use the point to do

[@JanazahF-16]

ابداع بكل معنى الكلمة ..لكن ما اسم هذا البرنامج ؟؟؟؟

[@AdamArchh]

شكرا،, Rhino Grasshopper 3D

[@humbertotoscano7726]

How did you learn to do all that? It looks super difficult

[@AdamArchh]

I guess with a little more work. It's easier than it looks. Trust yourself.

[@aminka9755]

@@AdamArchh my I know what’s your major Mr. Adam

[@AdamArchh]

@@aminka9755 Interior architecture

[@freerunner0123]

For the W domain in surface Morph, why do we give the value as -0.1?

[@AdamArchh]

Because we are entering the extrude value as input. It is the thickness of the surface we will cover.

[@vinsenbagaskara]

why i can’t see the layers when baking geometry on last step?

[@AdamArchh]

I don't know

[@vinsenbagaskara]

@@AdamArchh layers were made from?

[@3dmedium648]

Does it possible with deconstruct domain square and make the varanoi pattern separately? And match with the design?

[@3dmedium648]

Upto my understanding, If we made without deconstruct domain square it will overscale the varanoi patten . If we use extruded surface as a domain, it will scale with in the required limits scale? Right

[@grafixartsMarrakech]

the biggest issue with this method is the seam line that is quite ugly. is there a way to make a seamless voronoi?

[@studio_20x30]

Can this be performed by the voronoi 3d tool also? Without making a 2d populate and with 3d populate

[@AdamArchh]

There is a 3D voronoi component but it doesn't work like 2D logic. Type ''Grasshopper Voronoi 3D'' on KZbin.

[@fivosans]

Can the Voronoi pattern be applied to any surface or geometry?

[@AdamArchh]

Use Map To Surface component

[@fivosans]

@@AdamArchh Thanks for the quick response. It really helped. Keep up the good work!

[@cameroncooper8618]

Hey Adam, did you remove with Audry Imas Pavilion?

[@AdamArchh]

Hi, yes, I went back and watched the videos and deleted a few.

[@blastme0ff]

HI thanks for the great explanation on this! Just wondering if it is possible to vary the sizes of the cells as well?

[@AdamArchh]

Hello, of course you can change it. You can change all the parameters you want. Duplicate or subtract Populate 2D points to change dimensions.

[@srab4865]

hello bro where can I find the file i did not find it in membership

[@AdamArchh]

Hi, contact us on Insta. We will send you the file. Insta: AdamArchh

[@erencaba4815]

Hocam merhaba yeni ogrenmeye basladim programi extrusiondan domain e bagladigimda kirmizi error veriyor yadimci olursaniz sevinirim.

[@AdamArchh]

Merhaba, aynısını yaptığınız halde bu sorunu yaşıyorsanız muhtemelen Rhino 8 kullanıyorsunuz. Eğer öyleyse; extrude edilen yüzey polysurface olmuştur. Çözüm olarak surface oluşturmanın başka bir yolunu kullanabilirsiniz.

[@tamanjongchoh8249]

Interesting video just dont know how to get to this level of fluidity grasshopper

[@AdamArchh]

Thanks. Actually, you know. You have taken the first step by following our channel.

[@aluettevegaruiz5842]

hello i am learning grasshopper and i was wondering if i could have a few private lessons please

[@zn10999]

Tanks Adam. That's great but I couldn't watch it all because my trypophobia was on level max 😅

[@AdamArchh]

Thank you Ahmad. No problem.

[@danielmonzon4912]

hi, where is the file, i can´t find it.

[@AdamArchh]

Hello, can you contact via DM: Insta: @adamarchh

[@edcooper12]

How can I make that with a rectangular hole?

[@ukaszenki2367]

What is grasshopper?

[@AdamArchh]

It’s a parametric modeling software

[@omar.7428]

Can u plz tell me the name of the software?

[@AdamArchh]

Rhino Grasshopper

[@lifeexpert8498]

It's way too hard for me to learn it 😢😢

[@raghadrizk1143]

المبتدئ من اين يبدا بالغراس هوبر لو سمحت ؟

[@Hi-pd2xf]

selam, senin yaptıklarını takip ederek aynısını yaptım sonucunun aynısını alamadım sonucunda volonoi çizgilerin içerideki scale çizgileri kalıyor yardımcı olur musun? düzeltmesi değişmesi gerekn neler? rhino 8 kullanıyorum.

[@AdamArchh]

Merhaba, mutemelen Rhino 8 kullanarak modellediğiniz için bir sorunu yaşıyorsunuz. Videonun başında oluşturduğumuz şekle dikkat ederseniz; yekpare bir yüzeyden oluşmaktadır. Sizin oluşturduğunuz yüzey birden çok yüzeyden oluşabilir. Eğer öyleyse yüzeyi oluşturmanın başka yollarını deneyin. Örneğin Rhino'da modelleyip Grasshopper'a aktarmak gibi. Başka bir sorun yaşıyorsanız lütfen daha detaylı açıklayın.

[@Hi-pd2xf]

​@@AdamArchh benim yaptıklarımın dosyası size yollamamı sansı var mı?

[@AdamArchh]

Instagram'dan gönderebilirsiniz. @AdamArchh

[@Hi-pd2xf]

@@AdamArchh gmail var mı?

[@Hi-pd2xf]

@@AdamArchh gmail var mı?

[@Mark-ft8yx]

Very nice result. I am not familiar with this software. It looks like a steep learning curve. I was watching with the hope of somehow reverse engineering your strategy in SketchUp. May I ask if you have any idea if this is possible in SketchUp? Again, nice work on the result. 👍

[@AdamArchh]

Thanks. You can do this using SketchUp. But I don't think you can do it with this method and this speed.

[@Mark-ft8yx]

@@AdamArchh Thanks for the reply. Can I ask if you know what keyword I would search to try find a tutorial dor this in SketchUp. I'm going to guess that this video will have people asking this question for some time. Thank you in advance.

[@tuna98khan]

Merhaba, eğitim videolarınızı sürekli takip ediyorum ve gerçekten çok iyiler. Rhino'da yaptığımız karmaşık veya parametrik bir formu lazer kesiciye gönderebilmek için nasıl hazırlayabiliriz?

[@AdamArchh]

Merhaba teşekkürler. Bu konuda size bir kanal atacağım birkaç videosu var.

[@AdamArchh]

kzbin.info/www/bejne/hWKbc2eNrLamers kzbin.info/www/bejne/a4DHlp-OrJiYgKc

[@tuna98khan]

@@AdamArchh Yardımınız için çok teşekkür ederim. Size bir konu hakkında daha danışmak istiyorum. Eğrisel yüzeyli modellerle çalışmalarda özellikle maket yaparken çok daha zorlu oluyor bununla ilgili bir tavsiyeniz var mı?

[@AdamArchh]

​@@tuna98khan Eğri yüzeyli formlar elde etmek için en iyi program Rhino'dur. Bu konuda çok sayıda subd eğitimi hazırladım. Maketle eğri yüzeyler elde etmek biraz da iyi malzeme bulmakla ilgilidir. Maalesef öğrenciyken biraz zor olabilir. Bununla ilgili Frank Gehry'nin maket videoları ilham verebilir.

[@Jed49]

Oh my hella Trypophobia !!

[@AdamArchh]

Oh sorry

[@dafagry5025]

Kok ge geli ngeliat nya

[@AdamArchh]

Thank you