How to fix a leaking commercial wall mounted two valve faucet

Replacement Hot Stem→ amzn.to/2ey1h13
Replacement Cold Stem→ amzn.to/2ey216f
Or just replace the whole thing→amzn.to/2dRxsdc
This is a commercial wall-mounted faucet. A simple fix as long as you don't also have to replace the shut-off valve under the sink. If you don't want to disturb the shut-off valve under the sink, an alternative is to shut off the water at the main valve that supplies the house or business. That valve is usually located outside.
SUBSCRIBE→ www.youtube.co...
•••••••••••••••••••••••••••••••••••
The camera I use: amzn.to/2ec3wTx
My backup camera: amzn.to/2edXF1e
Super handy tripod: amzn.to/2dfVRTq
Wireless Mic I sometimes use: amzn.to/2dAgquC
•••••••••••••••••••••••••••••••••••
Business Inquiries: please email me from the About page:
/ adamdiy
Disclaimer:
This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not AdamDIY and or Adam Hill. If you are uncertain about any step of the process, or feel unsure about your skill level, seek a more authoritative source.

[@nadorosa]

Thank you so much for Posting this!!! I fixed the sink at my bakery!!! FYI for anyone with a commercial sink the flat washers is the 1/2” o.d. Size

[@andresusilo1]

Thanks 😊

[@adamcross4270]

I just wanted to say thanks. I have this exact faucet and need this exact repair. I really appreciate you posting this video it helped me out a ton.

[@gingerfaye6319]

Thank you so much! I am a senior on a fixed income and | was able to stop my leaking faucet with spending about $1.50 on new washers.. Excellent video.

[@willgreen7600]

Thank you so much! I was about to buy a brand new faucet for $100+, but all I really needed was a package of washers for $3.50

[@drejal]

Thanks! I just bought a house with a leaky commercial faucet in the garage. now I can see it's relatively simple to fix myself

[@AjiNoPanda]

My shop's mop sink was leaking and thanks to this video I managed to fix it on my own. Thank you so much!

[@thecheesecakeboutique-yout4821]

Thanks, Adam! This seems simple enough for me to handle at my bakery. 😅Don’t need any more bills right now

[@lynda_lee994]

Cool! Thanks for making this video! My kitchen faucet is a wall mount like that and just started to leak. Take care!

[@muniznick]

I carry an inexpensive assortment box of washers that include brass screws and also a small box of o-rings to cut down on parts runs, my svc rig is like a warehouse. When I go into eateries I try to park my service rig right in front of their doors/windows and have gotten a good amount of new restaurant customers who need emergency service.

[@tonyhuang4760]

Great video. I had a leaky faucet at the restaurant where I work and this video helped me fix it. Thank you.

[@PacoOtis]

Dude! Thanks for the video! We owe you a beer! Please describe how to remove the body that remained in the faucet. Ours are in terrible shape and quite hesitant to be released from the faucet.

[@kayto9311]

So helpful!! What about an issue where the faucet knob just spins - even when tightened via the top screw?

[@paulrichards8323]

Just what I needed to see. Thanks for this video!

[@officialbunners]

Thank you! This was the perfect video! Really appreciate you sharing your knowledge and helping people out. All the best to you

[@FroggFroggy]

Used this video to fix a leaky CHG w/ assorted washer pack from Lowes (used the 00 17/32"). Thanks!

[@DV-ll9zq]

Thank you so much :) We have the same problem and don't know how to fix it. Your video is very helpful.🤣🤣

[@richardweiner6405]

Very nice video, Adam! This is the first one of your videos that I’ve seen but I already hit the like and subscribe, it was that good!

[@Cubikins]

I have one of these in my house kitchen and needed to know how to fix this type of leak, thank you so much,

[@ToadLiver]

Appreciate the video as I was looking for a commercial kitchen faucet. Had the same problem. Never saw the original washers so I had no baseline to compare but they were definitely worn. I also laughed at your comment when you said, "If you have any questions - just ask them for help." The typical response is... "This isn't my department, but let me look it up for you and see if we have them in stock." Ha. Also, did anyone else take note of Lowe's doing away with their 'Help Speakers' notifying employees that a "Customer Needs Assistance in the ___________ Section?" Customer service seems to be a thing of the past...

[@justinadair5154]

Nice redirect on the red vs blue thread lock! That would be a bummer next time you have to replace that washer.

[@justinstolowski5622]

Thank you for the video it was very helpful and saved alot of time trying to figure out what was wrong...

[@paulcooper889]

Thx u for sharing 🙂 saved me lots of money

[@southernjoe9728]

Thanks man .!! You may have just saved my skin.

[@brucebender5940]

Changed the washer and still drips. Is there a seat that can be changed.

[@raytom5758]

Thanks man! Very helpful. I was able to fix my faucet.

[@TheCompound01]

Have the same faucet on my kitchen sink. The hot water was leaking. Replaced washer with a new one. Stopped leaking for a few days. Then started leaking again. Wife just keeps trying to tighten the knob. Could a small flat copper washer be added to the washer. To help stop the leaking. Or would it damage the valve sitting. Thank you.

[@reptilelover4ever]

God bless you for this

[@dmthom]

I am wondering if this fix would apply to, not leaking, but water coming out very slowly.

[@robyarroch5712]

How do you adjust the handle positions? Say i want them at 6 o'clock orientation....

[@DavidRodriguez-me4ny]

Very nice job!! thank you for share those tips.

[@brandonfoy9583]

Thank you so much! Which section of Lowes was that that you found All those washers? I went the other day in the toilet section and they had some but nothing like that.

[@cocoemerge313]

Great video! I'm having the same problem with my mop sink. I feel confident that I can fix it myself now. Thanks! :)

[@MyKonaRC]

How do you replace the whole unit?? How do you take out the part(the liner) that is INSIDE where the tap sits?

[@michaelbruguier8029]

Very helpful I am now a fan thanks I work in a casino

[@harishbhasin7395]

How to replace this faucet brass seat where this rubber sites?

[@__comic]

What if it’s stripped and it just keeps on turning ? Should I replace the whole handle ?

[@HealingPonds]

thanks very much for posting this i tried everything the best part for me wash the link to the new stem i ordered one that should fix it

[@BoundlessSocietyOffiicial]

How much did you charge to fix that job

[@erikandersen4440]

Thank you for this video!

[@Thursday-ck7hx]

That was very well made. Thanks for the help!

[@angry.8]

Thank you for sharing!

[@abelcerrillo2162]

What did u charge for that repair?

[@Mmmpastaa]

What kind of screw is in the valve holding the washer in place?

[@tylerc5311]

Support your local plumbing supply stores instead of the big corporate giants like Home Depot and Lowes. I'll be honest, prices will be maybe 5% more expensive at the smaller stores, but the service you get at a professional plumbing supply shop is unbeatable and goes a very long way when tackling home projects!

[@AvvieLanche]

I bought this Chicago Faucet from a supply store, and for $350 I do NOT expect it to have the leak that I am going to repair tomorrow

[@jesuszavala9150]

You are totally right I prefer to spend a couple of bucks more and getting tutoring about a project at my local shop than going to home depot where many times they don’t even know about what they sell if you are lucky and get help

[@rodolfoclavarrios5240]

You video save my day

[@reginarandolph5223]

Thanks for posting

[@larscall2778]

Hi I replaced the faucet but I still have a drip coming from the junction behind the hot water valve?

[@kylekirby6424]

Thanks for the tutorial! I love your videos.

[@premaratna8370]

Great video

[@cassandragonzalez1930]

nice work at a restaurant and I'm the maintenance guy need to know how to fix this sinks new at this job

[@torres870rem]

Nice video. P.s. The problem is that many times at the big box stores, they do not know anything. they are just organizers.

[@AdamDIY]

Right. Sometimes you find the guy who really knows his stuff. The Lowe's near me has some great people. But I know what you are talking about.

[@torres870rem]

+AdamDIY Yep.

[@7vanzzy7]

That whole piece doesn't want to come out after loosening the nut?

[@Lunchboxh3ad]

I have the opposite of this. Neighbor cranked on my handles and now it won’t turn on no matter where the handle spins. Any ideas?

[@martinpretorius4875]

Just turn the washer around. Saves time and money.

[@kevincao844]

Thank you

[@jessyacevedo102]

What if before removing the handle it free spins like the handle literally has no open or shut power it just free spins if you spin it like a disco ball. We tightened the center screw to turn off the water. Any idea what could be wrong with it? I could really use your help.

[@yeshuayeeyee7430]

Little late to this but sounds like your handle has lost its teeth. Gonna need a whole new faucet

[@kaga1]

how do you get T&S B-1120-LN Hot Stem off? i loosen the nut all the way but it won't come out when i try to pull on it.

[@duggydugg3937]

kaga was it a cartridge faucet ?

[@jeanallan1579]

REALLY GREAT VIDEO..Thanks

[@frankyanez1604]

I replaced Krowne compression valves with new 1/4 turn ceramic cartridge valves and change seats but faucet leaks from spout. Why I am very puzzled.

[@vikings844]

Im tring to fix the same problem. Except the screw that holds the washer is striped and wont tighten! Is there a way to fix that also the handle is hard to turn

[@znrctrnn]

vikings844 get a new stem.

[@rividizd]

Very helpful. Thanks man

[@firstpowergeneratorscanada5789]

good video. Thanks, DF First Power Generators

[@Atown76703]

How much do you charge for that type of job

[@jlopez9202]

What happens if I can't remove that small washer screw just keeps spinning

[@dariuscherry3119]

washer size ??

[@FuntoWatch888]

Hi i replaced a quarter turn cartridge but somehow it turns 360 not sure whats wrong. Please advise.

[@billzerkeley]

How would you remove a handle that is stuck on one of these?

[@vankhoth2136]

Well inform!

[@torres870rem]

Or you ask the guy of that section of what you need and he said "I have no idea I'm going on break".

[@molohe39]

good job

[@daylate]

Using the Chanel #5 backwards. Tsk tsk tsk... Them handyman be going wild.

[@antran4465]

Thank you soo much!!!

[@kimberleymckay5949]

I can't screw the damn thing back on the faucet now😱

[@TaylorBritzz]

Respect.

[@sissymarylen15741a]

Well that's never coming apart again without heat

[@johnnyjunior4716]

never put thread locker on that.....

[@Marb6]

I couldn't get past the removal of the big nut at the bottom

[@tannerhunt2438]

What if the other valve is leaking 😅

[@prod.enzoshawty2948]

You should compare the two valves see which one is causing the problem and which one isn’t

[@johnkrim8377]

Why don't you use an adjustable wrench on the CHROME nut and learn which way to use a pair of pump pliers?

[@intelin123]

Theres always a shitty hater like you

[@rosier.9957]

I did not donate. Ot was automatic. Stop it

[@Ryanrock2]

flip the washer over, done

[@deanb949]

Hacking chit up over there aren't ya? Will be leaking tomorrow doing that lazy $h!+

[@Texasmade76]

Bro invest on a basin wrench.

[@pauldurand3840]

Wow clueless

[@MattMcDonaldSD619]

Thanks ! Great video