Add Juniper devices to your EVE-NG lab | Quick Labs

In this video I demonstrate how to add juniper images to my EVE-NG lab environment.
Below are the links used in the video to add the Juniper switch to EVE-NG:
1. Free Juniper switch/router image download page
www.juniper.ne...
www.juniper.ne...
2. EVE-NG naming convention (how to name folders and device images)
www.eve-ng.net...
3. WinSCP easy to use file transfer application
winscp.net/eng...
4. (Fix permissions) Run the command below on the EVE-NG virtual machine
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
5. For step by step instructions on creating an account with Juniper, view the link below:
supportportal....

[@spikes.4687]

Thanks Brother 🏵

[@burnsybob70]

Excellent. Straight forward, very good video! It worked.

[@funwisely]

Thanks for tutorial.

[@kezieiwueke2868]

Great videos, thanks Jon. On the vQFX-PFE device, I get this error that says "No more network devices" and "No bootable device", I get the same error too on vMX-VFP when I try to install the vMX appliance but the control plane works just fine. If you've run into something similar and have any pointers, please feel free to share. Again thank you so much, your content is amazing!!

[@jongreenit]

Thank you for your kind words Keziei! I usually encounter that error when EVE-NG is unable to recognize the software image name specified in the qemu folder. Double check the naming convention used for software image folder and file names to match the requirements in order for them be detected.: www.eve-ng.net/index.php/documentation/qemu-image-namings/

[@TheAv0lution]

Same issue here. Image names match..

[@oshrigermay3676]

Thanks for sharing

[@zoltron30]

Sweet man!!! Worked to a charm!!! The PFE and RE are shown in 1 Junos box but how do you connect to another PFE and RE box with the Ethernet interface?

[@jongreenit]

Glad you were able to add the devices to your lab. On the vMX you can connect the ethernet ports from one PFE to another PFE. However on the vQFX the interfaces are swapped, you'll have to connect the ethernet ports from one RE to another RE.

[@ThelongWatches]

Hi Jon, Any alternative link to download switch and router image? Thanks

[@jongreenit]

Try this direct link to juniper's software portal: support.juniper.net/support/downloads/?p=vjunos-router This second link should direct you to all of juniper's free virtual lab images: www.juniper.net/us/en/dm/vjunos-labs.html

[@buikien1501]

Hi,I tried to access web-management GUI on EVE-NG but it doesn't work.Tried the lastest vJunos ,even CLI edit have command for enable this services. Did you tried to access GUI,does it work for you ?

[@jongreenit]

What error are you getting?

[@burnsybob70]

Hi there Jon, I am having a wee problem with Eve-ng and the vQFXRE and PFE images which maybe you recognize and can help. My Eve-ng lab is up and running with the vQFX RE and PFE images and everything looks ok. However the Interfaces are displaying different labels depending on the type of command/show command I enter. When I connect the devices it shows the xe-// Ports. I can also configure the xe-// Ports. But when I do a show interfaces terse, the CLI displays the "em" Ports 0 - 14, not the xe-// Ports. If I do a show interface xe-0/0/0 etc it displays "device not found". Do you recognise this? Maybe I did something wrong somewhere - i've no idea. Thanks for any advice

[@jongreenit]

Interesting, this would be a new one for me. Have you tried re-adding the software images to EVE-NG, or installing a different software version for the vQFX appliance? Optionally, since from the operational mode command show interface terse, it appears the system sees the virtual interfaces as "em" ports instead of "xe" ports - try configuring the "em" ports with IP addresses in config mode and see if that reflects in the new output of "show interface terse"

[@khurramaziz2430]

Hi jon , when i try to download it say "Software download entitlement is granted for customers under the following scenarios Juniper Product within the first 90 days of the hardware warranty period. Juniper Product which is currently under an active maintenance contract. Juniper Standalone Software Subscription which is currently active." and there is no download link. Can i get a link the these files ?

[@jongreenit]

Hi khurramaziz, to get access to the virtual images you must create a free account with “evaluation access”. This will allow you to get access to images like the vQFX, vMX, and vJunos Switch. Here’s a link: www.juniper.net/us/en/dm/vjunos-labs.html

[@ivanplevneliev4612]

Hello, all I get when I start the device and open the console by clicking on it is black screen on the console. Can you help? P.S. I have found a fix! The filename should end with .qcow2 in order to work!

[@jongreenit]

Thanks for sharing the fix Ivan

[@myanmartiktok2293]

i do not see xe 0/0/0 to Xe 0/0/11 interface in juniper router.

[@jongreenit]

which device are you working with? Some devices can take about 10 minutes to fully boot up

[@myanmartiktok2293]

@@jongreenit image is vQFX RE and i can not see xe or ge interface . I only see em interface root> show interfaces terse Interface Admin Link Proto Local Remote lc-0/0/0 up up lc-0/0/0.32769 up up vpls pfe-0/0/0 up up pfe-0/0/0.16383 up up inet inet6 pfh-0/0/0 up up pfh-0/0/0.16383 up up inet cbp0 up up demux0 up up dsc up up em0 up up em1 up up em2 up up em3 up up em4 up up em5 up up gre up up ipip up up irb up up lo0 up up lo0.16384 up up inet 127.0.0.1 --> 0/0 lo0.16385 up up inet 128.0.0.4 --> 0/0 inet6 fe80::200:f:fc00:0 lo0.32768 up up lsi up up mtun up up pimd up up pime up up pip0 up up pp0 up up tap up up vtep up up root>

[@anupvishwakarma8162]

could any one provide vqfx image as I'm not able to download the image from website

[@jongreenit]

At a glance it looks like the vQFX is not available for public download however can download the new Juniper vEX switch using the link below: www.juniper.net/us/en/dm/vjunos-labs.html

[@muntasirkhan6968]

Hi..My LAB is working but could not able to download the Juniper router/switch image file. When I try it said "You have encountered this error because your account privileges do not currently permit access to the information or service requested. Software download entitlement is granted for customers under the following scenarios." If it is free then why I am not able to? Apart from that if you have the image can I have that?

[@jongreenit]

Hey Muntasir, ensure the user mode “evaluation access” is selected during the setup process when creating a new free user account

[@muammerergin7765]

Arifin mençıstıra attığı gölü izliyordum, nerelere geldim.

[@jongreenit]

Running into any issues?

[@chetharjit]

How to add Cisco devices

[@jongreenit]

@David Bomball has some really good videos on how to add Cisco images: kzbin.info/www/bejne/j3y8laRpjNySeZIsi=BgQzhU9D75N8__Um