Adding Fog Lights to a Car or Truck That Never Had Them? Watch These Complete Install Tips!

[@1AAuto]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

[@ishwarclement4521]

Finally, a detailed video with clear instructions. Thank you very much.

[@cabonitajr]

I've seen so many tutorials and by far this is the most helpful one. Thank you

[@JuanitaLouw756]

At least, clear guidelines that is understandable to people without any knowledge, thank you.

[@itsflav3224]

This tutorial helped me install (correct the installation from the previous car owner) fog lights to my 04 rsx. THANK YOU!

[@jamesanderson4014]

That is a good video. I have stripped all the wiring from a 300m special including the mirrors which are colored painted to my 1999 Chrysler Concorde. the 300m, concorde and LHS have the same fuse box locations and Chrysler supplies power to all positive slots that are not used on LH body stlye. I have all the modules and keys and locks. Just looking a good dash. Oh, I did leave the wiring to the power train and engine.

[@BestMods168]

Really good video. I recommend supporting businesses like this that go put of their own way to educate us.

[@tabathahancock9507]

Great worl! Very well detailed. I wish I had you here to do mine!

[@1AAuto]

+Tabatha Hancock Thanks for the feedback!

[@markforster6457]

13:43 - Could you plug the piggyback adapter into the empty fuse slot next to the blue fuse? It shouldn't be a problem because the piggyback adapter has a fuse. A learning question. Thanks!

[@travisdrum6760]

LOVE THESE HELPFUL HOW TO VIDEOS!!! THANKS GUYS!!

[@googlreviews7813]

Great video, I'll be installing new foglights on the Toyota CHR next week, this will come in handy. Thank you.

[@johnafleenor2986]

That poor battery is the epitome of “lack of maintenance”. Geez. 🙄

[@rrrttt1112]

QUESTION Regarding the red wire that goes from the switch to fuse box that you said at 2:43 that you wanted it to be wired where the key is off, that it was not powered. Is it possible to connect that wire to the low beam power wire? Since there is a relay, wouldn't that connection be sufficient? I am thinking that way, it disconnects each time the lights are turned off, thus having the fog lights behave as they did from the factory. Is this a possibility?

[@llretro686]

what if i already have fog lights but they are DRL and i don’t have a button to press them on & off (buick lacrosse leather)

[@workutadesse2355]

Thanks, Brother it is a good teaching for me. GOD bless you. I have one problem with my car. that is when I go to night time the head lump is dim, Brother do you have a video about a head lump(A short lump is good but a long lump is dim) for Toyota 2003 automatic model

[@jmezxx]

followed this for my 14 tc , ty very much 👌🏽

[@one2869]

Watched twice. It's a very informative video. I didn't see or hear mention of these turning off with high beam. I honestly can't see how it would with this installation and kit. Where I live, that is completely illegal and i would fail an inspection. Did i miss something? If i didn't, do you offer kits that allow it to work with the high/low beam? Thanks for any info.

[@soldiersvejk2053]

Some Toyotas are pre-wired while some are not.

[@oliknow]

would be a good practice to add protection over the red wire before the fuse. if it rubs through or something it can cause a fire.

[@MosheGavrielBinkovitz]

Hi, thanks for the professional video! I understand and imagine that the principle is correct and suitable for any type of vehicle, but do you have a video or tutorial for a Kia Sportage?

[@adambbbbbbbbbbbbb]

GREAT VIDEO helped me install foglights on a completely different car lol

[@eloymelendez4571]

Would this be the same process for any car without previous fog lights. I have a 2017 Mitsubishi outlander sport without fog lights

[@ScottyPlop]

Is the positive line connection to the battery necessary 👀 because this is not a plausible option for the new 2025 Camry lol

[@juancacho2152]

Question???? Did you have a video of how install fog lights to Nissan Kicks 2023 or this video works for any car ???? 🤔thanks.

[@smnkm4ehfer]

What about on a ford taurus SHO that doesn't offer them on any model at all? They don't have OEM trim pieces or mounts, nothing, not even an aftermarket.

[@mohdasriismail5326]

This video help me alot.. Thanks

[@1AAuto]

+Mohd Asri Ismail Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@raymuniz113]

My car has already these wires installed because I wanted fog lights and my car didn’t come originally with them. I had an electrical mechanic do the work. So now I need to replace one of the aftermarket fog lamps because the LEDs stopped working. So could I just replace the lamps without replacing the wiring if the fog lights are from a different manufacturer? This seems too complicated for me. I would greatly appreciate a response.

[@nunyabizness2564]

Hi, I was quoted $150 to install lights to a mitsi galant ( I supplied the Parts and wiring) Looking at your videos I'm wondering is that's too much?

[@MarkAlmendralTV]

best tutorial ever

[@johnm7882]

Sir you are the man. Whatn an awesome video. Very clear and precise explanation.

[@bobg1685]

Nicely done.

[@johnwinchester9654]

I have a 2023 jeep compass that for reasons unknown didn’t come with foglights. I’m trying to find a modifying kit to add them at a reasonable cost. I’m not sure anything is available, but wonder if you guys have a kit or even some suggestions. I’m not sure if I need to cut into existing cover or purchase an entire piece with foglight bezel and brackets etc.

[@685HamoBoy]

Very helpful thank you brother ❤

[@AtomSquirrel]

What I don’t understand is the kit I got came with a wire jumper for the switch where I guess I’m supposed to get power by clamping it onto a hot wire for the parking lights. It’s like a little razor blade and you close the little door onto it to I guess tap into the wire. Should I cut that off and wire it into a fuse tap?

[@RaptoMc]

excellent video! thank you

[@evegtrrz28]

Hey im looking to get this whole kit for my 07 avalon , i cant seem to find everything shown here on your website . Do you have a link or the whole kit bevause i only see the lights not the wiriing for them

[@revelionxation1286]

Hello 1A Auto. Was there any pre wiring harness for the fog lights?

[@PhenomProductions23]

I'm trying to add square or Rectangular Fog lights to my 1976 Firebird in the front bumper in the open space next to where the Amber parking lights / turn signal flashers are. Will this Kit work for that?

[@miketheman08]

@1AAuto Can't find the wiring harness kit that includes everything anymore on the website. Is there a direct link?

[@alfredo042295]

I install a fog lights in ford edge everything work good the only problem the white lights keep blinking when driving the car

[@turbojay1616]

Best, Thankz sir.

[@wilsoneashoian5789]

Sir, how can I connect the power wire so that only when engine is running fog lights come on to avoid the battery drainage?

[@ProbabyPeter]

My suv didn’t come with fog lights. Just plastic inserts. They have the fog light HB3 connectors down there but no power. I checked the fuse box n it has a slot for fr fog relay & fr fog blade fuse slot. They’re both empty. I’m just trying to figure out what type of relay n amp fuse to buy n insert… even after I do that how will I turn them on?😂

[@richardsantana1482]

I wanna know it that light fits on Nissan versa 2007 to 2012. Thanks!

[@leevaughn321]

My base model 09 corolla has factory plugs installed. I installed bezel and lights, plugged them in but they are not working. Lights tested good. Any suggestions?

[@kriolenpillay5784]

Could you have used the fuse tap on a blank fuse spot

[@nathaly4846]

do you have fog lights and switch for 2018 chevy silverado?

[@Netvoedelo-y2p]

Hi, I would like to watch exactly the same, but for 2023 RAV4 Hybrid ! Thank you

[@kuroyukihime3026]

Hi can you make video that you can make side mirror to hand manual to power side mirror

[@jud2820]

You guys sell the kit, do you sell the glass separately?

[@1AAuto]

+Jud We do not sell the glass separately at this time.

[@jamescoleman4083]

love this video

[@leslieporter-murray1490]

You can come and put fog lights on my galant..😊

[@sohailahmed3101]

Sir where you put yellow wire

[@colinblaas3592]

But what if, you can replace your already existing round lights switch to one that also supports front fog lights, how would you wire that up?

[@yourcousinbobo]

There’s none for a 2020 Audi A3 Quattro?

[@bellluna9017]

ChrisFix vibes.

[@dancearoundtheworld5360]

i just got a plastic tube and gave it a sharp end to make the tool, whatever works

[@guyhxggxns]

What wiring harness did you use? Is that a universal wiring harness?

[@1AAuto]

+Guy Higgins Our fog light upgrade kits we carry include all of the necessary hardware and wiring harnesses to add this feature on your vehicle.

[@faezalaziz932]

does this apply to any car?

[@krishneil2012]

What make and model is this car?

[@Luna-dt1nt]

Nice vid

[@Jake-rg1tg]

What do I do if my battery is located in my trunk?

[@floyd1526]

but battery bit dirty ....but all good with lights

[@carmellowash1770]

I need head lights for a 2007 chrysler aspen

[@1AAuto]

+Carmello Wash Thanks for watching. Please take a look at our website for the parts you need! 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@AnimeRick86]

Excellent video, now I just realize my car doesn't have fog lights. SMH😒

[@CharlieAshmore]

I would like to add fog light to my 300 chrysler

[@kotastrophie]

That 2nd red hot wire is confusing me

[@jeremiahdevoe9950]

Anyone here for a Toyota Yaris?

[@Jumaratif]

Eazy explained

[@1AAuto]

+Jumar Bey Thanks for the feedback!

[@miguelcalmo2005]

Does anyone know why one of my dog lights is brighter than the other ?

[@SteveV74]

That battery though…..

[@MA-vm6jl]

Why can’t u show how to wire it so it doesn’t require a switch. More of a factory look

[@radicalttc]

Problem most people don't know when to run them. They blind everyone they meet. Same with idiots that drop.the rear of their pickup. They can do that but have no idea how to adjust the headlights. Thank God they have been banned in S.C. an N.C. after a couple of people got run over. Because the driver couldn't see them. Now it's lawsuits and jail.

[@anonymousperson4363]

You assume we all drive that car.

[@M.B-f6o]

This installation is, by far, NOT a professional installation. Those grounds and the positive-to-battery terminal connections will corrode in no time!!