Adding light to a 2023/2024 Harley-Davidson touring motorcycle

[@ldubb9621]

Nice Video Chris! From the back Grady is Killing it! Nice work bruh!

[@ChrisGlides]

Thank you. I appreciate it.

[@linhnha1339]

Nice lights!

[@ChrisGlides]

Thank you. I appreciate it. Thank you for watching

[@MinnowMoto]

Good stuff. I was thinking about the Break free light, especially on group rides. My Pan America has a thin bar.

[@ChrisGlides]

It’s an Excellent device. You will benefit from it.

[@Pete-ot2tu]

It seems that HD introduced a different CANBUS system on the 2023 Road & Street Glide CVOs and 2024 Road & Street Glide models. That’s why they introduced a new Wiring Harness and LED Tour Pak LED light. I have the same brake light problem on my 24 Street Glide and am still hoping to find a solution!

[@ChrisGlides]

Hi. I appreciate it. You are right . The tour pack LED that works that they sell is the same old one as before. All other tour pack LED’s work from all companies and from HD accept for this Signature one with the sequential built in. I believe it’s internal inside that specific LED because the same series Saddle bag lights that are connected to the same exact harness operate on all the functions including the Brake.

[@AJTStuff]

@@ChrisGlides So I’ve poured all over the schematics. There are no CANBUS connections anywhere back there and the four wires (plus ground) going into the light bar are DC +12. You have a lot of wiring experience and access to an old style bike. Do you have an o-scope you could hook up to try to see if there is any signal difference between the two bikes? Looking at the diagram, the two brake lights and the Tour Pak brake light input all split off the same wire so the input signal to all of them must be the same. Finally, have you prodded your dealer to see if they can poke around and see what options there might be in the digital tech?

[@ChrisGlides]

@@AJTStuff kzbin.infootoXMEtC9uc?si=mmRnkUJD0ztWjc2v

[@ChrisGlides]

Trybee Harley LED Tour Pack Light... www.amazon.com/dp/B0D8QCF9LK?ref=ppx_pop_mob_ap_share

[@MotorCity2up]

Chris did you ever find a solution for the tour pack bar light brake light not engaging?? I have a 2024 road glide same issue

[@ChrisGlides]

No. Not yet. I think that when the 2024 or 2025 CVO Road Glide limited comes out then there will be a BCM Flash available for this model CVO. The computers that are used to flash currently don't offer the option on screen for our bike because they don't normally come with a tour pack or light. The BCM must be flashed to "Designated Brake Light". The only other option that I can think of I just haven't tried yet. I don't want to say my idea because if it work I will sent out the hack for it but first patent my product and idea.