96 FORD Ranger Auto LOCKING Hub And ROTOR Removal 4x4

[@aDIYCarGuy]

The stock caliper bracket bolts are 15mm or something close to that...

[@tinman1955]

15. I just took mine off. Appreciate the video because I didn't know how to take off the brake rotor.

[@fryertuck8387]

Thanks dude! This is the only video I could find for the auto locking hubs and replacing the bearings!!

[@jasonmock848]

You have no idea how much you just saved me lol. I really appreciate it. Btw its the same on a 94 mazda b4000 too!

[@edgauthier157]

Great video exactly what I was looking for

[@phillipblack1272]

Thanks man for the simple vid I needed to know where it all goes stupid bro took it all apart and then said I can't do this and asked for help. Thanks man again

[@aDIYCarGuy]

welcome man!

[@zephyr-ss2ie]

super helpful. was totally confused on how to get it off.

[@joevanblarcume8469]

Very helpful thank you. Just asking how much for the transmission and the transfer

[@lucasgallegos1413]

Thank you so much. Very simple and easy video. I’ve watched so many others and yours Happened to be the best!!

[@rirogoose]

While watching your video, namely the part where you reference possibly using a hammer and chisel to remove the large nut, I noticed your chisel is mushroomed and cracked --- I highly advise you to grind that off. Because if you strike that chisel and that piece breaks off, it can be like a .22 and cause bodily harm. I had to have a piece removed from the back of my hand that punctured a vein. And please wear safely glasses. Stay safe!

[@aDIYCarGuy]

will do, thank you

[@tnathnigcoltd1401]

Please I need your number wattsap

[@whiteboy8291]

What part of town you in

[@jaimealberto4564]

So, is it possible to re install the wheels without those hubs and have it running? I mean the bearing would be enough ? Awesome video thanks

[@koltonshotrods]

How tight do you put the spindle nut? Like a normal wheel bearing?

[@megadeth934]

150 ft lbs. You need the special socket and a torque wrench. It lists this in the clymer manual you can get at oriellys for $30

[@Arcturian1111]

At around 1:05 what is that part called.

[@aDIYCarGuy]

cam assembly

[@deborahcuster8142]

what is the difference by the location of the splined washer and the other 2 washers ? from my experience , the thin washer and the plastic thick washer on on the out side of the splined wahser, and , those 2 are larger inner diameter than the splined washer.

[@Sip28]

I saw a extra hold on the 4x4 hub does a little screw fit in there because there is no screw in mine.

[@austinfleece9378]

Where did you find the special socket for the locknut?

[@aDIYCarGuy]

I used a chisel 3:11 but you should be able to find the socket online or at an auto parts store

[@mudflapraceteam5443]

Thanks...helped me out tremendously

[@outn8900]

Es muy peligroso a que los valeros tengan ese grado de desgaste

[@farmboysdelite]

Torque specs on nut?

[@brandonrogge1859]

Do you still have those spindles?

[@chelysgarage1457]

where can you get the cam assembly from. I don't find it anywhere online. Is there a junkyard or some NOS place you know about. If you have some let me know I'll buy it.

[@brandonjensen7344]

What was that name for the round part you just pulled off mine is broke and can't find one

[@danieldurrant8144]

Any reason why the automatic locking cam wouldn't go back on after disassembly like in the video?

[@MichaelSmith-wf3vb]

Do you still have any parts left it's a long shot .looking for a cam assembly

[@aDIYCarGuy]

Sorry I don't

[@salscrofano7870]

I got a 93 ranger with the same hubs do you know which manual hub fits them. It’s exactly what you were working on

[@Lray4x4]

Someone get this guy a can of brake cleaner lol.

[@aDIYCarGuy]

already covered lol: kzbin.info?o=U&video_id=kUe74WegWEU

[@stvargas69]

And a broom

[@brianorozco2843]

Do you know where I can get the nut for the auto locking hubs. I can't find it anywhere

[@ericwilkes238]

Where can I get the clutch for a 95 ranger

[@aDIYCarGuy]

probably an auto parts store, ebay, junkyard

[@ericwilkes238]

I see it's called a cam assembly

[@gabrielgranados388]

Donde compro las tuercas, que quitaste,? tengo una Ford 150 1996 y se me barrio una tuerca

[@tnathnigcoltd1401]

Hello. I need this ford ranger brakes disc and hub. can you help please get for over there

[@aDIYCarGuy]

I don't have the truck anymore sorry

[@TheSilliestGoose516]

Got any tips for where to find a decent tube bumper for the front end? I've been building on this truck for going on a year now and can't find any thing outside of OEM stuff

[@aDIYCarGuy]

It's probably tough to find aftermarket parts for these older Rangers, maybe jegs, summit, ebay, amazon, jet, bonanza, cabelas

[@13bravoredleg18]

James Duff has bumpers...

[@jasonsmith-yo2mb]

You still have anything left off this truck?

[@aDIYCarGuy]

nope it's all gone

[@lemkelegion]

The auto hubs actually worked well but people burnt them up cause they didn't back up 10 feet to disengage them...

[@parkercole6351]

What

[@JulianGuevaraphoto]

Will this work with the 1994 Explorer? Thanks in advance

[@vascoiriondo6609]

Yes man is very similar if its not the same

[@superseriousreviews1168]

You the realest. Thank you.

[@jimmiesowder5665]

Hello. Do you have the a a locking from 96 ford 4wd .. I NEED ONE. HOW MUC

[@damiansailas6296]

I need the hub cap for my mom's truck. 94 ranger

[@ericwilkes238]

Any body got a cam assembly for a 94

[@jesusthecholo8007]

#W83241 part number for the hub socket

[@mr.salammander139]

Does anybody know the name of the tools

[@aDIYCarGuy]

The tools I used are a jack, jack stand, pick, hammer, and chisel. They make a hub nut socket that you can buy if you want.

[@mr.salammander139]

@@aDIYCarGuy ok, thanks

[@mr.salammander139]

@@aDIYCarGuy do you happen to know the size of the socket

[@aDIYCarGuy]

@@mr.salammander139 It's 2-3/8 like this: amzn.to/2Pt4ywp. If you're reinstalling, there is a procedure to follow to properly tighten everything: www.explorerforum.com/forums/index.php?threads/my-1st-gen-front-brake-job-diary.122696/

[@tnathnigcoltd1401]

Hello

[@thestoneage7213]

Please I hope you see this I need the wheel bearing from inside the cap I don’t know how to take it out if someone has some advice on how to replace it let me know

[@ericwilkes238]

Wish I had found this before I destroyed my hub cluch

[@ericwilkes238]

I mean cam assembly

[@timmorris4483]

Good pic great

[@kenberscheit948]

another one of fords "better ideas"

[@stevenbarlow1945]

Those are not 3/4 bolt heads they are 19mm. Everything on the vehicle is metric. Yes some will seem to interchange but the actually donot.