Adjustable Circle Cutter || Drill Machine Attachment || Chandrabotics

It is a very useful drill mechine Adapter. In this video I have tried to say how we can use variable circle cutter as drill machine attachment.
You can buy this:--
Digital Craft 30mm-120mm Alloy Steel Adjustable Circle Hole Cutter Set with Plastic Wood Hole Saw Drill Bit Tools Hex Key for Woodworking www.amazon.in/...
Share, Support, Subscribe!!!
Subscribe: rb.gy/zau1eu
KZbin: / chandrabotics
Twitter: / chandrabotics
Facebook: / chandrabotics
Facebook Myself: / mechandrachur
Instagram: / chandrabotics
About : Chandrabotics is a KZbin Channel, where you will find technological DIY videos.
Innovation with little bit of Investment. Prioritising use of easily available materials. Could be Implemented from Home Environment.

[@Chandrabotics]

One security advise for everyone. You must be so careful when you will use this tool. Please take safety precautions because safety is the NO 1 priority 😊 Thank you all.

[@baronbaronov760]

you don’t mind your fingers, you’re working dangerously.

[@anthonyshiel4865]

If you're going to burn your way through wood why not just buy a box of matches!!

[@seismoalarm667]

I asked the question: "CIRCLES for METAL" and you represent me for WOOD!?, BARABE, and by the way they are not in quality because the OK key is processed in the screw head so it is not possible to move the knife!?, ...

[@TheseusTitan]

I would only use this tool with a drill press and clamps. Using a hand drill is too dangerous… and stupid. Wear eye protection too

[@Chandrabotics]

Exactly. Thank you for your comment ☺️

[@karwasra001]

If it's giving smoke while cutting holes ......that simply means Inferior quality Blades not sharp enough And you applying unnecessary pressure

[@Chandrabotics]

Good observing ❤️ Thank you for your comment 😊

[@Tinker1950]

Painfully slow - and you seem to be an accident in the making. The very thing I wanted to find out about this tool was never made clear - how easy is it to get both cutters accurately exactly on the same radius and both cutting heads at the same depth.

[@Chandrabotics]

Yes you are right. Still I use it for various projects.

[@drrajj9041]

The Company may try this: First get the circle mark on wood with single cutting (side) bit. Then only insert the other side bit pointing to the circular mark and tighten the screw with allen key to get radius and depth accurately aligned.. With 2 cutting bits work may be faster and smoother. Of course, this video takes me back 40 years when I used to cut 7-8 inch dia holes for speaker boxes, with single cutting side bit..

[@truthofreality7990]

Why don't you cut thicker wood like 2 inch

[@Chandrabotics]

Because it is very different 🤭🤭

[@thomasralfenson2684]

I have done very similar with woodglut designs.

[@Chandrabotics]

Great ♥️

[@drrajj9041]

The Company may try this: First get the circle mark on wood with single cutting (side) bit. Then only insert the other side bit pointing to the circular mark and tighten the screw with allen key to get radius and depth accurately aligned.. With 2 cutting bits work may be faster and smoother. Of course, this video takes me back 40 years when I used to cut 7-8 inch dia holes for speaker boxes, with single cutting side bit..

[@Chandrabotics]

Thank you Sir for your valuable feedback 😊

[@remizee]

Safety first please.

[@albarokah5977]

Untuk bor mini masuk ga yah...3mm

[@BaljeetSingh-qo1mc]

Online side send me drill bit name

[@Chandrabotics]

Check description

[@firozlakha1834]

Sar hame ye wala machin chahiye

[@Chandrabotics]

Description main link dia hain ap kharid sakte hain.

[@umeshtanwar95]

इसके कटर ब्लेड्स नही मिल रहे है kha मिलेंगे

[@khansalman7418]

I want only blades

[@markanievas7087]

go to some safety seminar guys if you like this video, this is unsafe way concern to body positioning and hand placing obviously. don’t see this comment as bad one 😊 it’s for our safetiness in work

[@Chandrabotics]

Thank you for your valuable feedback. Next time I shall definitely be more careful.

[@IceAge20017]

It's hard to use. Very loud, easily bounces back off the wood creating a dangerous situation, and you need a drill with the power of a V12 engine to cut anything but soft wood.

[@Chandrabotics]

Yes you are right.

[@j33t52]

What is the use of that other metal stick which was put at drill bit's palace. The one you were leveling with cutters

[@Chandrabotics]

That is for thin sheet. Where you do not want hole.

[@skfackt-kz3zq]

Sir isase 15 inch ki cutting ho sakati hai kyaa or isaka name ret bataao

[@integratedinstrumentations427]

can it be used for 2mm thick sheet cutting ???....

[@Chandrabotics]

Try to cut from both side.

[@kkfilms58347]

Bhai maine ek order kar laya, AC board nahi kaat paya yaar.

[@Chandrabotics]

So Sad.... Par mere hisab se bahot accha bhi nehi hain or bahot bura bhinnehinhain. Kam chal jata hain chota mota.

[@Chandrabotics]

Thank you mera video dekhne kaliea. Mera others video bhi ap dekh sakte ho.☺️

[@kkfilms58347]

Kal side blades ko sharp karke dekhta hu. Na ho to return kar dungga, electrical kaam karta hu. Socha tha panel lights ko lagawngga, ac board kat kat.

[@Chandrabotics]

Accha. Tab to ap ko prefessional set up lena cahiea. Accha wala lenge to apka kam ho jayega Sayed.

[@kkfilms58347]

Haa, sayed

[@mikhailyadav]

Horrible jig.

[@stallion63m35]

Why? Have you used it before?

[@sandeeptiwaribollywood9878]

Sir machine Lena hai

[@Chandrabotics]

Video Description main link hain order Karl Li jiea.

[@FunnyFilmShorts]

Muh mein kya he? Why not talking ?

[@Chandrabotics]

Thank you for visiting my channel ☺️

[@thambidurai7483]

👍

[@Chandrabotics]

😊

[@ashutosh3817]

@@Chandrabotics bro in how much u BUYED

[@hwfranjr]

From what I’ve seen theses things cut really ragged holes,use a jig saw safer and easy,lol

[@hwfranjr]

Good way to loose a finger,lol

[@Chandrabotics]

Nice joke 😂😂

[@bsc4462]

Waste

[@Chandrabotics]

😔