Advanblack stretched saddle bags install

I'm continuing my rear end conversion project on BlackBird (my 2020 Electra Glide Standard) from a stock look to the Advanblack Dominator fender with stretched saddle bags and stretched side panels.
In this video I take you step by step in fine details through the process of replacing the saddle bags from stock to Advanblack stretched ones.
Check out Advanblack website to find this beautiful conversion set up :www.advanblack...
=====================
Find more information , Merchandise and contact me forms on my website - holyshift.us/
- Donations:
www.paypal.com...
----------
Follow my Instagram : / holy_shifttt
FaceBook Page: / holyshifttt
----------
Bike set-up
The lights I changed on the Harley Electra Glide :
- Head light - Halo effect ALL LED - amzn.to/3vIBF58
- Chrome bezel around head light with turn signals - shrsl.com/3aqsl
- Rear Signal Light - amzn.to/2MSz0RV
- Tail Light - amzn.to/3cY5W6a
- Blacked out saddle bag reflectors - amzn.to/3cVpIkj
- Gear Shifter linkage - amzn.to/2IOgKKB
- Phone mount - connected to Quad Lock ball and phone case : amzn.to/3abUPsf
and that is connected to a RAM mount system :amzn.to/3rDRU1c
- Black Bolt and plate to connect the seat Hand tighten - amzn.to/366EqU5
- The luggage rack on Amazon - amzn.to/37R6MTd
- The Docking hardware magnetic caps - amzn.to/31XSwEG
- The smoked tail light was bought on Revzilla - search :"Drag Specialties Laydown Taillight Lens For Harley item: P404017"
- LED Light Bulb used for smoked tail light : amzn.to/2GZtNIT
- Fairing wind deflectors : PBYMT - amzn.to/34qy2oy
- Chrome Front Axle Nut Covers - amzn.to/39o0pWV
======================================
Gear I wear:
- The RIDING kicks - Bilt : Dexter - amzn.to/3hX2QCm
- Helmet I'm wearing (with face cover )is a Bell Rogue - amzn.to/2ER2Up7
- Helmet I'm wearing (Half helmet) is a Crazy ALs' beanie - amzn.to/30L7tKf
- Harley Jacket - Trenton - amzn.to/2B7VVGi
=============
My video gear:
- Camera I use the most - iPhone 11 : amzn.to/2XZ3vwn
- Motovlogs and sport scenes:
- GOPRO HERO 10 - amzn.to/30etrHz
- Body "CAM" police style ,INSTA360 GO2 - amzn.to/3D9WMQZ
- The video shots that look like a drone is following me really close and video taping me are taken using a 360 camera mounted on a selfie stick:
- I use - Insta360 one R - amzn.to/3IbcWNU
- Insta 360 invisible selfie stick - amzn.to/3s5xDTR
- Waist belt mount for selfie stick - amzn.to/3s7DAzp
- Sound track - Sony voice recorder - amzn.to/3gvSOaY
- Microphone connected to it - amzn.to/3hYtf2y
-----------

[@alexramirez2959]

I like the fact that your just a regular dude with crappie tools just like me . I guess I will be getting myself some advan bags thanks

[@HOLYSHIFT]

Haha the frigin torx thing ! Who uses that Shxt !

[@borealmetalworx]

That totally changed the vibe on that bike - mint and the apes just fit in now brings it all together. Great work.

[@DavidSmith-fw6uj]

Love from Mississippi USA 🇺🇸

[@JimHalo784]

What a big change to the back end. Looking good

[@thomaskrakowka6311]

Fantastic doesn’t even look like the same bike grate job

[@randyboisa6367]

Damn! Those bags set that bike off bro! Shes lookin sweet!

[@frankhabib5748]

Sandy: now the Tuchus transformation is complete. Mazel Tov!

[@GlidingOnTwos]

Looks 100 times better!!👍

[@user-qw3zt9vl4n]

She is really looking good Sandy..

[@steved4382]

Thats a beautiful transformation, night and day difference!! Thank you for introducing me to the Advanblack site. I never heard of their products until watching your KZbin videos so thank you for that!

[@HOLYSHIFT]

Cool man ! Thanks for visiting me here

[@tommiller8714]

Amazing transformation; looks awesome! I like the look (sound & performance bump) of the 2-into-1 exhaust system and exhaust cutout configuration on the bags [re: opening for exhaust pipe on right side (front brake lever side of the bike)].

[@mikespillane1838]

Looks great Sandy !

[@NoName-xf2nf]

Sandy doing a great job with your bike (make it your own)

[@ryanm8456]

Really looks great. Changed the whole look of the bike. Advanblack really took care you.

[@HOLYSHIFT]

Yeah they did

[@jamesbecker5977]

Awesome illustration! That's exactly what I was looking for! A new proud subscriber here. Thanks.

[@robertfagan8833]

The bike is coming along beautiful Sandy.. the rear looks awesome.. great content

[@kevincarnes7598]

Great job Sandy!! It changed the whole look!! Looks fantastic!!

[@tonytaylor1019]

Back of bike looks way better now. Nice job Sandy. Sounds great also. The bars are nice and perfect height also

[@robertogonzalez6971]

Very nice Sandy looks awesome. Stay warm it's 87 here in Puerto Rico 🇵🇷

[@deplorable4584]

Really sweet. Good job

[@dennisknoblauch4700]

Looking good my friend. This is the style i dig. Great job.

[@dalewhitt727]

Awesome! This is a good change!

[@jessedemayo4883]

Looks sick sandy!!!!!!

[@HudsonMoto]

Looking good Mr Holy Shift! I like!

[@arthurnava4518]

Looks good 👍 and great video 😎 Art from Reno NV 😎

[@easyglider1307]

Looks Sweet Sandy. Sending you some warmth from Sunny Florida

[@louisgoldfond6326]

Sanddyyy I love it. Bike looks really really cool. The 2 into 1 pipe now looks really good 👍. Looking awesome buddy. Enjoy. Be well

[@danpomm8632]

Nice upgrade Sandy, looks awesome ✌🏻

[@joeadams8972]

That looks amazing!!!!

[@HOLYSHIFT]

Thanks

[@cabby316]

That looks so clean now eh, nice work Sandy, 😎😎😎

[@georgedefuria9304]

Looks great brother

[@NoName-xf2nf]

Also love planes how much trust on the plane you fly

[@HOLYSHIFT]

73000 foot/lb each engine

[@NoName-xf2nf]

@@HOLYSHIFT that’s a lot of horse power but brother I Absolutely love airplanes

[@onlyhereonce7290]

I like the look of those bags. I’d buy them. But we know where they come from. Like you, I wish they were USA manufactured. You just made another great video. Thank you for sharing. My 2021 Indian Chieftain turned Roadmaster has slammed bags. Which hug the exhaust. It’s a great look. Same as the look on your bags. And those super sexy Cadillac style tail lights. !! Tbh, that’s my favorite part of that conversion. Good job.

[@streetglideboy412]

Good work Big Pimpin! Looks great!

[@brucesaunders3075]

Really awesome looking, what a big difference! 👊

[@richardboggs260]

Good job Sandy Looks very good!!

[@Americanpatriot602]

Looks great!

[@bradlozano2571]

Looks good...Its got that lowrider look in the back👍😎

[@boissellenh110]

Looks really good! Nice clean look

[@rjlopatic]

Looks great Sandy. Hey it was 62 and sunny in Knoxville TN today😄.

[@HOLYSHIFT]

Thanks a lot buddy! ….🤣

[@andrewmartinez2810]

Looks good !!

[@ACADLOU]

Very nice additions. I have the same cam, fender and bags.

[@warbar95]

Looks good Brother. GOD BLESS

[@gtime7916]

Hey Sandy. You have really made your bike, yours. It really looks nice. You will have to stop calling it an Electra Glide Standard and start referring to it as an Electra Glide NSS (Not So Standard)

[@onlyhereonce7290]

" Electra Glide Special ". That’s what I’d call it now.

[@HDVIBE]

Great suggestion on the new name for his bike. 👍👊🇺🇸

[@joesbuell]

Sandy you may want to get an extension for your exhaust tip so it protrudes just past the cut out.

[@HOLYSHIFT]

Do they have anything like that? That’s a good idea

[@joesbuell]

@@HOLYSHIFT what brand sand diameter is your system? You can buy just Google them. 👍

[@Bullwolf1965]

Very nice!

[@kellybgliding]

Oh yeah! Looks awesome H S !!!!!

[@lifeliners1]

Very pretty

[@MrOdin68]

100% good Job,100% better 👍🏻👌

[@carolinarider5237]

AWESOME! 🔥😎🤟

[@hectorsantiago321]

Very very cool

[@HOLYSHIFT]

Thanks buddy

[@josephmirigliano8728]

Looks great 👍🏻

[@chadcox9296]

Looking good!!!

[@frankhabib5748]

Sandy: did the stretch bags come with the rubber bumpers on the bottom of the bags; or did you transfer the ones from the OEM bags?

[@tlimsisnw1948]

Ordered my parts for cam upgrade

[@jasonkimble8926]

Looks good 👍

[@jamesdunn3508]

Nice. Curious if you have hyper flash on dash indicators. I have it since the Dominator fender.all lights on bike flash normal but dash ones are super fast and if you hit the brakes while turn signal is on then red security light comes on the dash too. Also I had to use the advanced black mounting knobs to get bags to clear stretched side cover and get proper gap so no paint rubs. Looks and sounds great.

[@HOLYSHIFT]

Don’t know about the light. I’ll know about the bag knobs once I install the side panels

[@a.r.o7697]

I guess you guys still like that slammed look on the east coast (I'm from NH originally)! It's all right, you'll catch up to the west coast one of these days! 14in shocks in the rear, +2 up front, and standard bags that's my set up. Harley finally caught on to that trend with the new Road and Street Glide STs.

[@MilesOn2]

Not my style, but it looks nice! You going to go for the big wheel bagger look?

[@kam08479]

Looks like your back rest is not inserted all the way into the bracket. You can also lower the backrest pad by pulling the button under the cover, slide pad lower on bar then release button. I have no gap between my seat and backrest pad but I have the pad at it’s lowest setting

[@HOLYSHIFT]

It’s the Harley seat and back rest - was always that height… I’d prefer if it was lower - to support lower back

[@michaelmclachlan4278]

Nice

[@gnt256]

looks great sandy... is that the stock seat you have?

[@f.t.w1066]

Killer look..👍👍👍🇦🇺

[@HOLYSHIFT]

Agreed! Thanks buddy

[@garrysceppa7508]

Sandy how is the stage 2 doing now that you had it for a min.? Thanks for another great install video.

[@brandoncampbell-py9zm]

What fender did you end up using?

[@danielmains4914]

Chrome or gloss black rims?

[@508knucklehead]

I love it!! I always hated stretched bags because you would have to run 2-2 or 2-1-2 Or run a dummy pipe. I love the 2-1 ‘s. Your bike looks sick! Now did that limit your lean angle? Or is it still too new to know?

[@HOLYSHIFT]

Yeah- still new to hear the scratch…👍🏻 😆 LOL 👍🏻

[@pbarre79]

Wassup bro...Great video. I have the 4.5 inch Advanblack stretched bags and just upgraded my slipons to 4.5 inch khromewerks. However, even using the adjustable mounting bracket from Advanblack to center the pipe on the right side, there is no room to rotate the pipe enough on the right to prevent it from touching the bag due to the axle nut on the right. I see you have a similar setup as your pipes appear to 4.5 inches as well, if not larger. How did you handle this because your pipe seems to be nicely centered

[@HOLYSHIFT]

I never had the problem with Axle nut touching the exhaust- so I don’t know why it’s touching on your bike..

[@pbarre79]

@@HOLYSHIFT it's always been that way on the right side. I have a '21 RGS and you know the indentation in the pipe that faces the nut, it's already pretty close to the pipe so there's no clearance. Thx anyway bro

[@HOLYSHIFT]

@@pbarre79 I guess the Kromewerks is a bit wider than my Propipe. But call up Steve from Advanblack- he told me it also works on Tab 50!Cal - and they are much wider that yours , maybe he knows a trick ….

[@pbarre79]

@@HOLYSHIFT yeah, I reached out to Steve on one of his videos. He's been very helpful with all of my installs. I know there has to be something because I see guys running 5 inch slipons with the stretched 4.5 bags.

[@alf1234552]

How many “ longest

[@jamesmitchell4975]

Looks good, but be careful because you reduced your lean angle.

[@medcook57]

U need a power screwdriver and power rachet.

[@HOLYSHIFT]

You’re right after this install I realized I do!

[@deplorable4584]

Yea Mister Holyshift get some 🔧 🔨 lol

[@UncleFjester]

Nice fenders, get a tripod and stop the handheld selfie videos!

[@leea.6101]

Not a big fan of the one exhaust pipe look on a bagger… looks uneven.. but, to each his own

[@nickricholetti754]

You miss this bike ???

[@HOLYSHIFT]

No . New bike even more fun !

[@vetter847]

Nize azz.