Cool video, clear no bad audio. Right to the point. Showing step-by-step instructions. No music blasting on how to vid making it hard to understand. Started to follow, already clicked on links for add on to my jeep. Keep up the good work.
@adventuredex7 жыл бұрын
Thank you! I love the feedback and will continue to make top notch Jeep installation videos!
@dominicsedillo75526 жыл бұрын
Dude....this video saved me hours of installation..step by step was on POINT.... final installation looks killer! Thanks 👊🏼
@demarcuscrump49042 жыл бұрын
What tools and sizes were needed?
@szudy76 Жыл бұрын
I subscribed because I own a Jeep 2014 wrangler JKU as well and your tutorials are soooo helpful. Keeps my husband from having to help me all the time :)
@socomt58 жыл бұрын
Just finished watching the video, honestly, I was not expecting much from the brightness of the side led's, I have to admit I am quite impressed. I will be saving this video for my side light install, Thanks AdventureDex.
@adventuredex8 жыл бұрын
+Denis Picciuolo thanks for the positive feedback Denis! They are very bright and great for being able to see to the left and right where the headlights can't reach!
@Eseugs18 жыл бұрын
I just bought these mirror lights right before Christmas and had no way of how to make these lights be a plug and play type for in the summer time when I want to take the doors off. AdventureDex glad you posted this video! This will help me a lot when I install mine! Great videos! Have watched most of your videos and I've learned something from all them.
@adventuredex8 жыл бұрын
Thanks a lot Eddie! I am so glad that this video helped! I enjoyed making it and am glad you enjoyed watching! Feel free to watch this video when doing your install. It is not extremely difficult if you take it step by step! Thanks for the support! #jeepwave
@ahreeves7 жыл бұрын
On the mirror separating aspect: put the connecting bolt back into the bottom about four clockwise turns leaving about 3/8” of the bolt away from tight. Then hold mirror extention arm, and use hammer to drive bolt down towards mirror housing, three good blows will separate the extention from the mirror housing. Time: 7 seconds
@adventuredex7 жыл бұрын
Thanks for sharing!!
@libniguerrero73635 жыл бұрын
Im not sure if anyone else has posted this. But it's easier to separate the base of the side mirror from the housing by leaving the mirror screwed in the housing so you have more support when you're hitting it
@christopherdemmer43655 жыл бұрын
Libni Guerrero this saved my day. After 30 minutes of hammering with a screwdriver, I went to HD and purchased a 4” Hex Cap Screw, class 8.8, m8-1.25x100 then screwed it most of the way into the threads and hit it with a regular hammer several times. Using the longer screw was the only way I was able to separate the parts and it only took a min. Than you
@Jefftaylor21148 жыл бұрын
I like these better than the light bars. it's more discreet and gets the job done, great video.
@adventuredex8 жыл бұрын
I agree Jeff! Thanks for watching!
@daltonaldrich45885 жыл бұрын
putting the string on the end of the old mirror will save you a great deal of work THANK YOU VERY MUCH FOR THAT TIP!!!!!!!!!!!!!
@forgingluck2 жыл бұрын
Thanks for that, this'll help a lot - getting some in in a few days that I'll have to wire up myself, looks like a really cool product. Any tips for getting it through the door panel hole if one doesn't have the power mirror harness to help fish it through?
@mets04038 жыл бұрын
So there is no way I have the patience or talent to do that. But still wanted to thank you for the video and they are freaking awesome looking!
@adventuredex8 жыл бұрын
+mets0403 Thanks for the support! If I can do it then I am sure you can! #jeepwave
@michaelwright67518 жыл бұрын
I ended up purchasing the Xprite Clear Lens Red LED Brake Tail Lights Assembly with Rear Turn Signal Reverse Lights For Jeep Wrangler JK which looked and worked just like the Anzio lights for half the price. Great test though, gave me insite and direction.
@adventuredex8 жыл бұрын
Thanks for the comment Michael! I am glad you found the video helpful! #jeepwave
@sylvanischurch34646 жыл бұрын
I have a 2012 JK Sport 2dr. It's a basic model, so no power doors, locks or mirrors. Is there an install/ wiring video for that?
@adventuredex6 жыл бұрын
Thanks for the comment! Its the same process just use a snake to fish the wires through the door. Hope that helps! Thanks for watching!
@julienagostini79523 жыл бұрын
Hello, thanks a lot for your video, we followed it step by step to make it, but one of my side mirror sis missing one of the 3 little screws behind the mirror, I was wondering if you knew what kind of screw is it to buy one, thank you
@adventuredex3 жыл бұрын
Glad you found it helpful! Now sure on the screw as it’s been a while since I did this install. Thanks for watching
@julienagostini79523 жыл бұрын
@@adventuredex That was a fast answer, yes that was very helpful, mostly the string trick, and no problem, I just didn't want to have to take one out again 🤷🏻♂️ thank you tho
@taadventures63127 жыл бұрын
Great video man. Just installed a pair of led mirrors. Not those but basically same thing. Only problem I’m having is the turn signals only work if the spot lights are on. Not sure what’s up.
@adventuredex7 жыл бұрын
That is strange, you might of wired the whole thing up to a switch instead of having them independent! Thanks for watching!
@MManiac9118 жыл бұрын
I just saw these this month and was wondering if I could find a video of them, they look awesome. Did you wire both LEDs to the same toggle switch? Also, you had to cut the white/red wire for the indicators and splice the wire into it correct?
@adventuredex8 жыл бұрын
Thanks for the comment bro! I already had my pod switch prewired so I ran the two positives from the LED mirrors connected them together and connected it to the switch. For the indicators, if you have a true splice clip you don't have to cut the wire, you can clip directly onto it and it makes the connection very easy! Hope that helps! Thanks for watching!
@TGRoman868 жыл бұрын
Awesome video brother, thank you for the step by step tutorial.
@adventuredex8 жыл бұрын
+Titan Ro thanks for the positive feedback! #jeepwave
@michaelscott20633 жыл бұрын
I love those side mirror lights is it possible you could send me info on how to get them wow man I did not think that they would throw that much light from one side to the next that’s awesome
@fernandochavolla61896 жыл бұрын
Can you explain more how to install this side mirrors to me please im lost and dont know what to do i love watching you videos just in this installation im having a hard time hope to here from you soon and thank you for your KZbin channel it helps alot
@jakestcloud49476 жыл бұрын
I cannot seem to find the indicator light wire on the factory harness. I’ve searched using a tester with no luck. Perhaps the amperage isn’t high enough to power the mirror indicator light? What color is the stock oem indicator light power wire on either side of the vehicle? I’ve tested the indicator light right to the battery and it illuminates just fine
@Ro3Go6 жыл бұрын
Badass Dex! I've got a mirror I gotta change out. Some idiot hit my jeep mirror on the left and gotta replace. Thanks for the instructions.
@adventuredex6 жыл бұрын
Anytime Luis!! 🤙🏼
@williamsarosy22527 жыл бұрын
What type of rosin solder did you use to wire? And as far as the quick disconnects, what size were they (12-10 AWG, 16-14 AWG, 22-18 AWG)? Thanks! Can't wait to do this to mine! :) Keep up the vids!
@adventuredex7 жыл бұрын
Thanks for the comment William, Unfortunately I don't know the answer to either questions. The quick disconnects that I would recommend are these (amzn.to/2nJUNQu) Thanks for watching!
@oscarlebron46784 жыл бұрын
Hey, Dax, I was enjoying this video, but I have a couple of issues with it. First, during the wiring phase you connected the ground wire to the frame and you already had you quick connects on the other two wires, but where did you connect those too? You went from the negative ground to soldering the other three wires and you lost me there. Also, while serpentining the wires to the other side, how would I connect those?
@USfoolsgold7 жыл бұрын
After watching your very helpful video I bought a set of these. Unfortunately I couldn't get over the large gaps between the glass and new housing so I sent em back. Great video though.
@adventuredex7 жыл бұрын
Thanks for sharing! What large gaps?
@USfoolsgold7 жыл бұрын
On the set I ordered from Amazon there was a large gap between the outward side of the glass mirror and the new led housing. For me, the mirror looked way too small in that housing. Got mine from Lantsun on Amazon.
@adventuredex7 жыл бұрын
Yah that is usually how they are!
@tazin8r4 жыл бұрын
Just wondering why you didn't use a three terminal connector where you used the three "Quick Connects" to extend the wiring for the LEDs? Would have made it much easier to disconnect when you take the doors off
@matpinato88927 жыл бұрын
6 and half hours later! lmao. Just got a pair of these same LED mirrors will install tomorrow thanks for the tutorial buddy
@adventuredex7 жыл бұрын
LOL Thanks for watching Matt! Goodluck with your install!
@Nerdblurt5 жыл бұрын
These are on my list as I like the smoke turn signals and the lights
@scottmacarthur62235 жыл бұрын
Great Video. I have a more basic 2013 wrangler, roll up windows, manual mirrors, this shows me I can add these even though I have the manual mirrors. Thanks again.
@buildersmark5 жыл бұрын
How about a led kit that you cut your mirror housing & install. Note also it would be good to purchase some OEM connectors to create harness from led wiring through door panel to give more professional installation.
@johnpsmith83565 жыл бұрын
How can you wire these to your DRLs and turn signals? I used a splitter running the turn signal wire to both but either one works or the other but not both. Any suggestions? Thanks!
@adventuredex5 жыл бұрын
I don’t believe they can work simultaneously
@rossmitchell9599 Жыл бұрын
Sir, I have a 2019 jeep wrangler,and would love those Mirrors, will they work on my Jeep?
@dab0yhdizzle6 жыл бұрын
Did u Plastic dip your wheels ? Looks nice
@adventuredex6 жыл бұрын
Yes, thanks!!
@carlosm8097 жыл бұрын
I'd like to get those for my 1997 80's series. Looks awesome! Can it be done?
@adventuredex7 жыл бұрын
Thanks for the comment! It could be done but it would have to be custom fabricated! You could possibly get a very slim flush mount LED and mount them behind the mirror. Hope that helps! thanks for watching!
@TheJohnhazelair7 жыл бұрын
How'd you wore to driver side door then to the wiring pod? I connect wires to driver door wires, then I tap into those to run to pod/turn signal?
@adventuredex7 жыл бұрын
Yes, you only need to connect the two LED's. The turn signals get wired individually cuz they are controlled separately by each side. Hope that answers your questions.
@chrissullivan17566 жыл бұрын
Those mirrors are so sick ! I will buy some for my jeep
@adventuredex6 жыл бұрын
Thanks!!
@waltervilellajr.77736 ай бұрын
Muito bom este vídeo , boa técnica , obrigado 🙏🏼 e que sigue fazendo más vídeos 🎉
@FROSTY4206920024 жыл бұрын
Does this work with Jeep gladiator 2020 since everything is usually the same on wrangler
@caospop8 жыл бұрын
Where did you get the LED turn signals, and the color changing LED lights inside the jeep.
@adventuredex8 жыл бұрын
Thanks for the comment! I have videos on both items on my channel but most parts you can find on my online store! www.adventuredexonline.com! thanks for watching!
@amirtv24798 жыл бұрын
Great videos man. I love them. They really helped my jeep look great
@adventuredex8 жыл бұрын
Thanks Amir!
@amirtv24798 жыл бұрын
AdventureDex up load more
@redneckindustries7 жыл бұрын
Too much work!! I'm just going to duct-tape flash-lights to my mirrors :)
@adventuredex7 жыл бұрын
LOL that could work too! Thanks for watching!
@GoBrentSpence4 жыл бұрын
LOL... Good Luck with that... :)
@RockyXTV8 жыл бұрын
Awesome video! I've had my eye on a set of these for Project Dirty Willy.
@adventuredex8 жыл бұрын
+Rocky X TV they are sweet! Glad you enjoyed! #jeepwave
@hughes17657 жыл бұрын
Hey man! I have heated and power mirrors on my 2015 Sahara. Will these replacements also be heated and power mirrors?
@adventuredex7 жыл бұрын
Thanks for the comment! Yes, these will work with no problems!
@awesomeamador19756 жыл бұрын
Great video! I was nervous to try this but I feel better after watching this video. Side question, what interior rgb lights did you get? Thanks again!
@georgerabel46176 жыл бұрын
Good video. Are those LED side lights legal for highway/street use? And are they adjustable for more forward use?
@adventuredex6 жыл бұрын
All depends on your local laws! Thanks for watching
@ahpamericanhandymaninparis43533 жыл бұрын
Hi I did install the two mirror with the LED light and everything work perfect, But the problem that I have right now it’s with the one wiring left for the Brinker, Also in my turn signal adapter I have just two wiring black and white what should I do to make it work ? Thanks
@marypoppins95967 жыл бұрын
I’ll never do this but I’ll still watch
@adventuredex7 жыл бұрын
Haha Thanks for watching!
@casmo38alicea407 жыл бұрын
I was watching your video onto how install your LED lights side mirrors my doors have power locks power windows but not my side mirrors what can I do
@adventuredex7 жыл бұрын
It makes no difference in the installation, follow the same steps! Thanks for watching!!
@armandomrgl856 жыл бұрын
Great video, I was looking at your build list because I like your grill with the light bar installed to check out the grill & didn't see it listed, I checked out the links you provided is that custom?
@chantalxox3 жыл бұрын
Question: I have these and love them but on one, the light went out so only one of them work. Can they be replaced or do I need to change them all the way out?
@original_silverdee4 жыл бұрын
Well this video helped me decide to buy the mirrors, great video Bro, thanx!
@michaelmixon24798 жыл бұрын
Good video! I might have used a door panel tool. They are really cheap and lessen the stress on the clips.
@demarcuscrump49042 жыл бұрын
Where to get tool?
@michaelmixon24792 жыл бұрын
@@demarcuscrump4904 Local auto parts store will sell them in a set.
@123456fco6 жыл бұрын
what caliber fuse did you use and did you wire the 2 mirrors to the same switch in your pod ??
@adventuredex6 жыл бұрын
Just a standard inline fuse will do. You only need 30 or 40 Amp. Thanks for watching!
@123456fco6 жыл бұрын
thanks installing them today
@adventuredex6 жыл бұрын
Awesome good luck!
@LouisCaputo8 жыл бұрын
Nice video. I think I'm a step closer to buying these now!
@adventuredex8 жыл бұрын
Thanks Louis! These are awesome! Totally recommend
@robertofals49844 жыл бұрын
I have a 6 botton switch that goes in the inside of my roof, where you say that you have two possitive, one goes to the signal light. Does the other one go on the switch box or where does it go??
@laylowmafia70722 жыл бұрын
So when you have your parking lights on does this turn in the indicator on the mirrorsV
@TheCscottfry8 жыл бұрын
These look great on your jeep!
@adventuredex8 жыл бұрын
Thanks alot Colin! #jeepwave
@chantalxox8 жыл бұрын
I love these!! Already looking into getting these. They're gorge!
@chantalxox8 жыл бұрын
Question!! What lights do I need to purchase to match the LED mirrors?
@adventuredex8 жыл бұрын
Thanks for the comment! Yea, they are always!
@adventuredex8 жыл бұрын
What do you mean match? Where are you planning on mounting the lights?
@TheJohnhazelair7 жыл бұрын
Gorge? No offense, but you typed out every other word- why not finish typing out gorgeous? Ugh society today. "Let's make fetch a word".
@chantalxox6 жыл бұрын
TheJohnhazelair Um... Why do you give a shit about how I talk? I'm a chick, not a dick so if I want to say gorge, I can. And yes, I made fetch happen. 😉
@ronniegriffin36716 жыл бұрын
(looking at the front) my right side indicator has two white wires one with green stripe and one with a brown.... my left had red and brown..
@adventuredex6 жыл бұрын
When you are unsure just use the process of elimination! Hope that helps!
@akamike1027 жыл бұрын
my jeep is a 2010 door panel is diffrent and my mirrors are not powered or heated any suggestions yo make it work
@adventuredex7 жыл бұрын
Its the same process just the bolts on the door are in slightly different places. Thanks for watching!
@timmcnulty37958 жыл бұрын
Great video Dex! Do you think the turn signals on the mirrors could be wired into the side markers so that they're constantly on like the turn signals over the wheel arches ?
@adventuredex8 жыл бұрын
Thanks for the comment Tim! You can essentially connect them to anything, however I wanted to have the same function as the turn signals so I connected them directly to the turn signals. Any power source will work tho! Thanks for watching!
@simondavis96627 жыл бұрын
Is there a way to install this on an 08? I have power locks/windows but no power mirrors.
@adventuredex7 жыл бұрын
Thanks for the comment! I am not exactly sure on the fitment but I am sure they make ones that are suitable for the 08. Power windows are not necessary. Thanks for watching!
@USfoolsgold7 жыл бұрын
07-17 are the same.
@adventuredex7 жыл бұрын
Same body but not the same interior so it makes the install slightly different! Thanks for watching
@airbornepalma6 жыл бұрын
How do you wire the blinkers
@adammichener55307 жыл бұрын
Where did you run the wires through the firewall?
@adventuredex7 жыл бұрын
Through the firewall under the drivers side dash! Its a rubber grommet that you will see! Thanks for watching!
@TopNoTchVSOP2 жыл бұрын
Every time I put my key in the ignition mines stay on even while driving.
@victorcuevas5179 Жыл бұрын
Hook up to a switch and for indicators, red and white cable
@casmo38alicea407 жыл бұрын
I have a 07 Jeep Wrangler X the door has power locks and windows but not the View mirror what can I do
@adventuredex7 жыл бұрын
What do you mean by view mirror? This can be done to an 07 with regular mirrors. I installed it last week on an 08, it is slightly different but the same method! Thanks for watching!
@jonathanEricStaffordRealtor Жыл бұрын
Just installed… everything seems good except the indicators are just on the dont flash when I turn or emergency the just stay running and I made sure I hooked it up to the corresponding yellow wire on light harness
@victorcuevas5179 Жыл бұрын
It's the red and white wire
@danielavargas32908 жыл бұрын
When did you get that new grill!!?
@adventuredex8 жыл бұрын
Thanks for the comment Daniel! It is a photo type that I am testing! Should be available on www.adventuredexonline.com soon! Stay tuned for the video!
@MrKrooKedTv8 жыл бұрын
AdventureDex Whats Soon & How Much?
@elvispolanco72708 жыл бұрын
hey bro. I've been trying to tint my soft top from a long time now and I couldn't. Any tip?
@adventuredex8 жыл бұрын
Hey Elvis, thanks for the comment but I am not sure what you mean by tint your soft top?
@Teutobog8 жыл бұрын
Nice pro tip with the string!
@adventuredex8 жыл бұрын
Haha glad you like that! #protip
@danielgonzales94137 жыл бұрын
Is there any tip if i did it without the string? I cant get my cables through
@adventuredex7 жыл бұрын
+Daniel Gonzales use a snake!
@patrickryan31087 жыл бұрын
What kind/gauge wire do you use to extend for the lighting
@adventuredex7 жыл бұрын
I usually stick to 14/16 G Thanks for watching!
@jonathanEricStaffordRealtor Жыл бұрын
@@adventuredexvideo shows a 10-12 …
@adventuredex8 жыл бұрын
Thanks for watching! I hope you enjoyed! #jeepwave
@socomt58 жыл бұрын
Off subject, where did you get your color ac covers? the Red really sticks out, and I think that would look good in my gray jk! Great vid btw!!! and happy new year.
@adventuredex8 жыл бұрын
+Denis Picciuolo Thanks a lot Denis! I have a DIY video on how to paint the vent covers! Check out my other videos! Thanks for watching! Happy new year
@kennyconley83838 жыл бұрын
AdventureDex when hooking up the power of the lights that color wires did u hook it up too in your jeep at the bottom? that's where I got lost at. and trying to put it on a switch. confused
@danielgonzales94137 жыл бұрын
AdventureDex i have a problem i think i installed in a bad way my mirrors connection cables, is there a way you can show me how to do it without the string u tie to the cables? I took it out without a tie string on the cables of the power mirrors
@adventuredex7 жыл бұрын
+Daniel Gonzales no worries just use a snake to feed the wires through. You can get one at any hardware store!
@davidjohnson39776 жыл бұрын
OMG!!! I have been "beating the ever lovin shit" out of this thing and I cant get it to separate.. The wiring does not scare me off this project but not being able to separate this mirror has me stumped! In the feed there is a post where he says rotate the mirror till it clicks. But is that after you loose it from the housing? I really like your videos but I really wanted a closer look at this base I'm beating the shit out of. Any clues?
@christopherdemmer43655 жыл бұрын
David Johnson I found that the fastest way to separate the two parts was to use a longer mounting screw instead of a screwdriver. I purchased a 4” Hex Cap Screw, class 8.8, m8-1.25x100 then screwed it most of the way into the threads and hit it with a regular hammer several times. Make sure you are holding the mounting bracket and not the mirror bracket. Using the longer screw was the only way I was able to separate the parts and it only took a min. Also make sure you don’t screw the screw in all the way because you don’t want to damage all the threads in the housing.
@jbrugggedjeep11207 жыл бұрын
Hey Dex, I'm doing the LED mirror install and ran into a snag. The T40 bolt on the bottom of the mirror is seized, so I can't get the housing apart. Have you ever come across this issue? Thanks!
@adventuredex7 жыл бұрын
Yes! Use a lot of penetrating spray and take your time! Try hammer a million times! Only other way is to buy a whole new housing! Hope that helps! Thanks for watching!
@jbrugggedjeep11207 жыл бұрын
Thanks for the advice. I figured it out by putting the mirror back on and breaking it. If anyone out there is doing this install you may want to do this, especially if you live in the cold and snow of the North.
@adventuredex7 жыл бұрын
Glad you got it sorted!
@jbrugggedjeep11207 жыл бұрын
Yes indeed, got it sorted and they mirror lights look damned good. Thanks for the vid. Wish I could send you the done pic.
@adventuredex7 жыл бұрын
+JB Ruggged Jeep Thanks man! Send me a pic on Instagram!!
@mcginn9976 жыл бұрын
What if I only want the indicator? Can I leave the other two wires tied off?
@RubiconUnlimited8 жыл бұрын
awesome glad to see a local Toronto supplier! how do you think these will hold up? how's the build quality? thanks for the awesome install
@adventuredex8 жыл бұрын
Thanks for the comment! They seem to be good quality! The housing is exactly the same as the Mopar so as long as you don't hit them on anything they should last! Thanks for watching!
@YOUNGGGGQI8 жыл бұрын
Will the heat mirror work after this been installed?
@adventuredex8 жыл бұрын
Yes, everything get reconnected and works perfectly! Thanks for watching!
@MManiac9118 жыл бұрын
I've also been looking at those headlights, are they DOT approved? Do they have a daytime or toggle-able light that isn't so bright, kinda like Halo's? I think I like that look better then the JW and halo style. I see a lot of people around town running those halos while parked, not sure that's a good idea haha.
@adventuredex8 жыл бұрын
Most LED's are for off-road use only. I wouldn't recommend running bright LED's on the road, it can be a hazard to on coming traffic. You can check out the range of LED headlights at www.adventuredexonline.com/shop thanks for watching!
@ArawnTheUndead7 жыл бұрын
Could you hook the side mirrors up to ur brights instead of the switch?
@adventuredex7 жыл бұрын
+Justin Manning Yes, they can be hooked up to any power source. Thanks for watching!
@georgerios68478 жыл бұрын
do those mirrors come on a 2004 Jeep Wrangler
@adventuredex8 жыл бұрын
Thanks for the comment! These mirror are recommended for the 2007 to present JK's. I am not 100% whether they can fit older jeeps! Sorry
@christophermichaelson90507 жыл бұрын
Your wire stripper has an "insulated" and "non insulated" area for crimping connectors. You are using the "non insulated" area for crimping your insulated connectors. Just thought you should know.
@adventuredex7 жыл бұрын
Thanks for the comment Chris! I appreciate the insight! Sometimes in rushing you make mistakes!
@demarcuscrump49042 жыл бұрын
What size bolt and tool is needed?
@Nunyabizn3ss7 жыл бұрын
How are those mirror lights holding up mate? Still happy with them?
@adventuredex7 жыл бұрын
+Marshmellafella Awesome, still work and look great!!
@baljeetsangha98846 жыл бұрын
Very helpful!! My next mod!
@adventuredex6 жыл бұрын
Thanks!!
@cautiontext8 жыл бұрын
hey dex order these from your Canada friend and got charged for two sets. The number is not working to contact them.
@adventuredex8 жыл бұрын
Thanks for the Comment! I will contact him for you and have him contact you directly!
@JeepAccessoriesGTA8 жыл бұрын
cautiontext Hi there. our phone number is 416-624-1357. please contact us to review your order. can you also provide us with your order number. Thank you. -Neo Jeep Accessories GTA
@cautiontext8 жыл бұрын
Jeep Accessories GTA awesome thanks!
@cautiontext8 жыл бұрын
Good doing buisness with you Neo. Thanks Dex!
@JeepAccessoriesGTA8 жыл бұрын
cautiontext No problem. Thanks for shopping at Jeep Accessories GTA.
@ronnielarry53013 жыл бұрын
My question is where to hook up the switch if I have no accessory panel of switches!? I don’t understand how to do this as there is no instruction on how to connect the switch and where to run the power for that switch. This is a bit of a challenge for someone like me. I can run the wires to the turn signals no problems and the ground, but the Main Power for the switch and led lights is a bit confusing as there are NO INSTRUCTIONS how to do it!! Don’t understand why all the praise for a clear missing portion of the install on the opposite side!
@christophermartinez53143 жыл бұрын
Excellent installation
@vanillascoop117 жыл бұрын
wow dude... that's a ton of work. great video tho
@adventuredex7 жыл бұрын
Thanks alot bro!
@GinKasai7 жыл бұрын
Will these work with manual mirrors?
@adventuredex7 жыл бұрын
Yes!! Thanks for watching!
@Nunyabizn3ss7 жыл бұрын
Thanks, I'll get them in short order. Will mention you in the notes.
@hersonvalle3 жыл бұрын
I can’t wait to do it to my Jeep
@jayeparker92815 жыл бұрын
my passenger mirror came apart with no problem, I am about to give up on getting the driver mirror apart.....whew....good video very helpful.
@morecrapforputdowns6 жыл бұрын
The current link in the description for the led mirrors aren't working =/
@adventuredex6 жыл бұрын
Thanks I will fix!
@H3ctiK1007 жыл бұрын
I did not attach a string to the end of the mirror Any advice on how to feed it back thru
@adventuredex7 жыл бұрын
Damn Hector! Your supposed to watch the video in advance! LOL Use a snake tool to pull the wire back through. Hope that works! Thanks for watching!
@brentking45385 жыл бұрын
Dex, do your power mirrors work with these lights?
@christopherdemmer43655 жыл бұрын
Brent King the answer is yes
@robbieginn46356 жыл бұрын
will they work if you don't have electric mirror
@123456fco6 жыл бұрын
does this work if i have no power mirrors
@adventuredex6 жыл бұрын
Yes, same exact thing!
@srinidhit82987 жыл бұрын
Is the product shipped internationally
@adventuredex7 жыл бұрын
Yes, contact Neo at JeepAccessoriesGTA and tell him AdventureDex sent you!
@srinidhit82987 жыл бұрын
AdventureDex I want the inside mirror too with it I want to fit it on my Mahindra Thar (Indian jeep)
@Jeep797 жыл бұрын
That's a great video dex thx i like those mirrors nice
@adventuredex7 жыл бұрын
Thanks Yaniel!
@billyshavers74146 жыл бұрын
Do they sale one for the YJ Jeep?
@patrickbond90648 жыл бұрын
any coupon codes ? i want to buy a brush guard.
@adventuredex8 жыл бұрын
Thanks for the interest Patrick! Email me for a coupon code: Info@adventuredexonline.com Thanks for watching!