axial ryft removing pre glued tires and new bead locks

axial ryft removing pre glued tires and new beadlocks how to we all have tires we like but plastic pre glued wheels we don't here is how I remove them and install new ones
follow me on Instagram ➡️www.instagram....
Amazon wheels➡️www.amazon.com...
#ryft #axialryft #rbx10 #ryftmods

[@BasBoyRC]

I was lucky with my wheels, the nuts fitted and then had the tool issue. The fake callipers did need filing down, you heat gun does work well and have used that way. LOL you did not want to stink out the oven, truth you did not want a rolling pin from your misses.

[@AdventureTimeRC]

Lol so true Malcolm she would beat me silly 🤣🤣

[@meirdeaph]

😂❤

[@matthutch5919]

Awesome information 👍 Thanks for sharing your knowledge, greatly appreciated 👍

[@AdventureTimeRC]

Thank you very much I really appreciate it

[@BasskingRc]

Thanks for the tip those are the rims i ordered for mine

[@AdventureTimeRC]

Thank you for watching I am still using them have held up really good

[@LesAdventuresdeschtisNomade]

good 👍👍

[@RCplamodel]

*Thank you for sharing such a great video! 👍👍👍*

[@AdventureTimeRC]

Thank you very much my friend

[@ShenRC]

Nice upgrade those look bad to the bone on it!! man you put a lot into this ryft.👍

[@AdventureTimeRC]

Thank you Steve I know its a money pit but I love driving it lol

[@meirdeaph]

✌️😎

[@c.k.hobbyshop3351]

Nice work well done looks good 👍

[@AdventureTimeRC]

Thank you very much

[@GuyonaMoose]

I built the kit version. I blew out two hexes. Gorilla brand super glue was a bear and I ripped badly 3 of 4. I like the tires. I need a new set. SSD makes nice adapters now that work on the wheels and they hold good and tighten normally

[@AdventureTimeRC]

Lol the RYFT is so mean I break something almost every time I drive it it really loves to tear up wheels

[@rc.terminator]

I like the way you did the tire removal never seen it done like that thanks for the share

[@AdventureTimeRC]

Thank you very much brother its always worked for me

[@Del350K4]

That's a good tip, pushing the rubbery part of the handle of the pliers down and sort of rolling it.

[@AdventureTimeRC]

Thank you Del it was a happy accident the first time I ever did it because my hands were getting sore now I always do it this way

[@canuckcrawler8522]

Nice informative vid ,thank you

[@CactusCrawlersRC]

Awesome! Thanks for the neat tire trick!

[@AdventureTimeRC]

Thank you for watching

[@RCRoads]

Thanks for sharing. This video really helped. All those tiny bolts around the bead locks probably take for ever to install but they sure look awesome.

[@AdventureTimeRC]

Thank you very much I really appreciate it

[@RCPM18_4x4]

Great vodeo my friend good job 👍👍

[@AdventureTimeRC]

Thank you very much

[@mattiasrc]

Looks nice, great job. The Ryft will benefit from a little extra width.

[@AdventureTimeRC]

I noticed that to I like these wheels hope they hold up

[@Fonzierc]

They are pretty cool I have the exact same wheels on the mauler . great video 👍 Brent

[@AdventureTimeRC]

Thank you very much I am hoping they hold up to the abuse I really like the wheels

[@Fonzierc]

@@AdventureTimeRC they might be ok for crawling but bashing around I doubt it ( hopefully it will be okay ) as we all know the Chinese alloy its a bit on the soft side and I know you give your rigs a good ol'bashing 🙂

[@MRBRUSHLESS]

Awesome video my man nice tutorial for removing wheels from the bead locks great job thumbs up

[@AdventureTimeRC]

Thank you very much I appreciate it

[@CarminesRCTipsandTricks]

GREAT IDEA!!! 🤘💪👩‍👩‍👧‍👧👌 I have done the Toaster Oven method before..... Messy, pisses off the Wifey, and takes much longer. I've got a Heat Gun and Rubber handle Pliers, I'm TRYING that!!!

[@AdventureTimeRC]

Thank you Carmine this has always worked for me not much smell either

[@CarminesRCTipsandTricks]

Well Brent, THAT'S a major selling point for the Wife!! 😊

[@SpringWoodsRC]

Wish I had a heat gun one tool I've not had much use for😂 l thats a good quick way of getting them off, I found boiling them in water for half hour was easyer for me an it doesn't destroy the plastic rims an no smell 😂👍 hope ur keeping well pal 🙋‍♂️✌

[@AdventureTimeRC]

Lol I have normally already broke the wheels thats why I have to get metal ones ryft is insane 😅 😳 🙃

[@SpringWoodsRC]

I don't think that it the ryft that's insane more like your insane with that trigger finger 🤣😂🤣✌🙋‍♂️

[@jasonanderson7020]

i just bought the vitavon 2.2 beadlocks, and im having a bugger of a time , ive got one mounted up so far but ill keep at it lol.

[@hellorc7678]

Hey you got them. Nice video and good info

[@AdventureTimeRC]

Thank you very much Jason and Lizz

[@panzadeviborarc9613]

Great video info Bro!! Have a great day!!

[@AdventureTimeRC]

Thank you very much brother I appreciate it

[@dramacidalrc9714]

Yes for 40$ they look great!

[@Chris18RC]

Wow 😍😍👍👍 nice video my friend 😊👍

[@AdventureTimeRC]

Thank you very much my friend

[@801rccrawlers2]

Heck ya. Another great tip. I baked mine wife still hates my guts

[@AdventureTimeRC]

Lol I bet it stunk that old wet foam stinks lol

[@jeffparryncc1701]

I soaked my tires in Acetone for 6 hours. It turned the glue white, but that's it.

[@AdventureTimeRC]

Never tried that before

[@NCmountainsYouTubeChannel]

The first time I baked off. RTR tires my wife come home. Thought I was doing something else. I was like hell no I got tires in the oven The terrible odor they go away.

[@AdventureTimeRC]

Lol thats funny I bet it smelt terrible

[@teamsargentrc6399]

Very nice! Great Job Done. Need to get that nightmare of a reserver out of my ryft, losses bind almost every time it's shut off...

[@AdventureTimeRC]

I had the same issue turn off the avc and make sure its on a level surface when you power up not a problem since I did this

[@teamsargentrc6399]

@@AdventureTimeRC thanks Brent... 🤜🤛👊

[@RC-CARS-WORLD]

I didn't think that those tires are so big comparing to your hands, or are your hands small 😋, great video my rc friend 👍💪

[@AdventureTimeRC]

Lol the tires are really big love them

[@rctrailcats3492]

Best way I've seen. Now I want to get a heat gun. =)

[@CarminesRCTipsandTricks]

Gary, I'm surprised you don't already have one! 😲🤔

[@meirdeaph]

I think i got mine for less than 20 an it works million times better than the regular haircut kind. the tires im saving with it cost lot more 😊

[@Marino_RC]

This is what i need ... thx for sharing this trick... stay innovative my friend 👍

[@AdventureTimeRC]

Thank you very much my friend

[@907arcticrc6]

Awesome video Brent, thanks for sharing. I have alot of Maxx tires too Do now . Lol Have a good one my friend stay safe 👍🥶👍

[@AdventureTimeRC]

Lol thank you very much Robert 💯

[@islandrc-duke1972]

cool information and nice bead locks

[@AdventureTimeRC]

Thank you very much brother

[@joespafford6499]

Question, we're those the 35mm wide set?

[@AMAZINGRC]

I have run into this quite a bit. I always purchase hex extensions. I have always had good luck with them. The black 1.9 aluminum rims will not fit over the portal axles on my SCX10III. I have 8mm steel extensions on each wheel to make room. I now have just enough room for the wheels which makes me super happy. Love the video.! Watched every second of it.!!

[@AdventureTimeRC]

Thank you Brian the problem is I can't find hex extensions for the m5 axles on the RYFT i think normally they are m3 or 4 they made them bigger on the RYFT so I can't find any hex extensions i love using them to on most of my crawlers

[@meirdeaph]

I glued black momba tires on crush lock wheels an needed thicker foams or inserts and dont think i was soposed to use the glue but seemed like a good idea at the time😅 im totally going to do this an fix them. 💯💪👍

[@grbii916]

What is the brand name of the wheels I can't find the color of the wheels you have in the vide.

[@LRCR]

Nice Looking Beadlock Wheels 💯 The Orange matches the Cage too 😁👉 Great tip on the tool handle usage with the Hot Plastic's ✌🤠👍 HFLPRCing 👍😎👍 AOAH 🌟 RCF4L 🙏 Stay Safe and Play Healthy Brother Brent

[@AdventureTimeRC]

Thank you Larry I appreciate it brother hope the wheels hold up to the beating lol

[@mypassionrc-studioxd40lous66]

Very very cool, love the wheels, and thanks for the tip removing the preglued tire. Needed this I have some nice tires I want to put on metal wheels, yes sir Thank you 😎🤘

[@AdventureTimeRC]

Thank you for watching Lou glad you found it useful it has always worked good for me

[@dramacidalrc9714]

Is this the orange crush build?

[@AdventureTimeRC]

Thats a great name for this rig thank you for watching

[@SteadfastRC]

This was really good, I have struggled with using the oven and boiling water to unglue tires, it's always a huge hassle and I've never had it work very good. I've done the homemade thin wall thing myself before LOL.

[@AdventureTimeRC]

Sometimes you just have to make your own tools lol heat gunboats always worked for me

[@cgdoublezerorc]

Nicely done. I was setting up a set of new wheels & tires myself this weekend. In past I've always boiled my tires to get the glue bead to break. I don't know what happened to my old pot. I might have to "borrow" the heat gun from work one day. Anyway an update video on my channel coming soon on my new tires, wheels & shocks. Rock on!! 00

[@AdventureTimeRC]

Thank you I have never tried boiling myself always did it this way might have to try it

[@RcNickster709]

Holy Screws.. JAZUS man!!!! And the wheel nut. I assume the Regular little "t" wheel wrench that everyone has, wont fit in there either? Huh!! That sucks. lol When it came to removing tires. I have found that Boiling the tire for a couple of minutes .. seems to work pretty good. The rim stays in decent shape as well. Only did it a couple times though. But Brent those new rims look pretty awesome on the rig brother. It will look good out there.. ;) Did you see the Ocean of Ryfts at axialfest? I saw a video on the course they had setup for them. Looked pretty cool. The ryfts were so new they all looked like they were stock. It was a fun event by the looks of it.. :)

[@AdventureTimeRC]

Yeah the RYFT has 8mm hex nuts everything is bigger on this rig really having fun with it

[@norcalrc]

Killer technique for removing pre glued tires. And perfect timing because I noticed that my stock rims are rounding out too

[@AdventureTimeRC]

Thank you brother the plastic just can't handle ryft power

[@kellykuretich6366]

😁😁👍👍

[@AdventureTimeRC]

Thank you for watching if you would like to see all the things I have done to my RYFT here is the link to my Playlist ➡️kzbin.info/aero/PLgREREWARLFbwK51E5ywttFQuCrSgpfsQ

[@RCWAN87]

🤩👍💯

[@AdventureTimeRC]

Thank you very much my friend

[@arsonist3013]

Don't buy these rims. I bent two in one mild jump.

[@AdventureTimeRC]

Bummer I haven't broken mine yet and I have been pretty hard on it that sucks sorry to hear that