AEROX Super Stock or 63mm Bore ? | What to get?

Facebook page: / twistedteej
CVT Set: Speed Tuner by Mickey Mazo
CVT Set configuration
Pulley & DF: Speed Tuner v2
Bell: Speed Tuner
Fly Ball: 9 / 10
Center Spring: 1500rpm
Clutch Spring: 1500rpm
Clutch Lining: Speed Tuner Clutch Assembly
Torque Drive: K2 Speed Touring profile female sheave
Engine Setup
K2Speed Piston Dome 58mm(STOCK SIZE)
K2Speed Stage 1 Camshaft
JVT Valve Spring
Injector: 130cc 10holes
Throttle Body: Stock
#TwistedTeej
#Aerox
DISCLAIMER: I do not own the rights to this music. No copyright infringement intended

[@RandgriZ04]

Meron na mga superstock ngayon na Camshaft nalang at valve Spring nalang papalitan.. port and polish nalang para hindi lumagitik.

[@YuriMoto26]

Galing sa stock meaning ng super stock. Minodified lang

[@ambertv.6111]

Sir goods ba ang 14t gearing for Aerox? Superstock set up + jvt buong gilid

[@TwistedTeej]

Hi katoda for high speed gaming yan oo pwede, kung need arangkada need maghabol sa timpla ng bola 😁

[@henryarcangel7633]

Katoda, naka superstock nadn ako :) nag break in kaba pagka super stock mo ? mga ilang KM ?

[@TwistedTeej]

Hi katoda yes for around 100kms break in process ko then aun ariba na 😂

[@TwistedTeej]

Hi katoda yes for around 100kms break in process ko then aun ariba na 😂

[@henryarcangel7633]

@@TwistedTeej haha slamat katoda, RS, lagi ako nka tune in sayo planning ako na ilagay ung K2Speed na half sheave

[@allenusmanmacabalang2217]

Katoda sa break in period Ilan dapat ang takbo?

[@TwistedTeej]

@@allenusmanmacabalang2217 hi katoda sakin inadvice nuon kahit 100kms na chill muna

[@hearthjaycatub5282]

Malagitik po ba ang super stock at normal lng ba yun

[@pinja2842]

Boss balak ko mag superstock, meron na akong r15 piston and cams stage 1, hindi ba plug and play yun?

[@melvinocampo1149]

sir ano cons ba super stock sa long ride at ano ngng fuel consumption ng super stock compare s stock tlg ? v2 aerox kse ako ngpplano ako n mg superstock salamat

[@TwistedTeej]

Hi katoda honestly minimal ung napansin ko during long ride around 35-37kpl reading nka abot kame sto thomas batangas from pasig full tank tapos nag pa karga na ko ulit nung nasa alabang na kame pauwi around 2bars pa nattira nuon and around 3liters nakarga sa motor

[@rinzsaquing201]

62mm or 63mm? Ano mas ok?

[@kammalili7160]

63

[@johnbrando2666]

@@kammalili7160 mas malakas sa gas nga lang

[@ch1llzipagan654]

Cams stg1, forged dome piston tapos jvt buong gilid kaya ssob?

[@emiljunumerez2613]

mas ok po b sir pgngsuperstock iportpolish yun mg valve pocket din?pero need n dn b mgpalit ng injecktor?

[@TwistedTeej]

Naka valve pocket na ang gamit kong piston katoda kaya all goods na.. pero sa mga di bet mag palit ng piston good na gawan ng valve pocket tlga ang stock piston may nka ganyan nrin samin nuon.. injector ko is 130cc 10holes di ako agad nag palit kasi nag sparkplug reading muna kame bago ko na advice mag palit nrin ng injector to make combustion better 😁

[@ImCarlo24]

Hindi ba mabilis mag overheat sir?

[@TwistedTeej]

Hi katoda so far nung na byahe namin to papunta kila OC sa bulacan 60kms bakbakan takbuhan namin 90-110 kasama si cartridge fm di nmn umilaw na over heat kahit nka 97octain gas ako 😁

[@ImCarlo24]

@@TwistedTeej maraming salamat katoda👍 pero need tlaga mag upgrade ng radiator? If mag forged dome piston din ako? Thanks

[@TwistedTeej]

@@ImCarlo24 not at all for radiator katoda! Kayang kaya parin ng stock yan 😁

[@ImCarlo24]

@@TwistedTeej maraming salamat ka toda, more power, ride safe.👍

[@TwistedTeej]

@@ImCarlo24 always welcome katoda RS and stay safe🔥

[@riderninja1779]

hello katoda superstock din ako..maingay lang yung cams ko,,okay lang ba yun?

[@TwistedTeej]

Pag gnun pwedeng valve clearance din kya nag iingay cams pero wla nmn problema ung ganyan

[@rykenzzz4313]

ano pinaka matindi mong maintenance bukod sa langis sa superstock lods

[@TwistedTeej]

Langis lng tlga katoda eh tuwing 1k kms palit na tlga agad langis.. wla nmng special na maintenance na nadagdag ..

[@YuriMoto26]

Ako 2500km pa super stock latest sakin.

[@biennkarlocorpuz8356]

Kuya twisted okay lang po ba naka Stockport sa superstock? Papa superstock po kase ako. R15 v3 piston Rs8 cams Rs8 +15 touring na Valve spring Valve seal po. Salamat po sa sagot 😊

[@TwistedTeej]

Hi katoda as far as i know kapag nag high compression ka kailangan medyo lumuwag ung intake at exhaust ng head pra ma punan ung magging new compression ratio ng engine.. better ask sa mag kkabit kung possible ito kasi sila nag ccalculate.. performance wise mas mainam nka port

[@biennkarlocorpuz8356]

Salamat po kuya twist ❤️ ridesafe po always big fan nyo po ako nila kuya OC ❤️

[@biennkarlocorpuz8356]

Kahit po yung cam bearing sa stock cam po pede po yun ikabit sa racing cam po?

[@TwistedTeej]

@@biennkarlocorpuz8356 always welcome katoda maraming salamuch 😍 soon balik kme by pass pra makapag speed kain ulit kila OC 😂

[@TwistedTeej]

@@biennkarlocorpuz8356 yes pwede yan katoda.. dipende sa cams mo kung mkka ingay sa cam bearing.. kung may chance pwede mo na isabay pra isang bukasan nalang

[@kendelatado1606]

Ka toda nag palit kaba ng base gasket at head gasket?

[@TwistedTeej]

Katoda nega all gasket stock parin ✌️

[@dizonjeffreys.7408]

sir pano po kung yung superstock set eh , pag binirit bigla eh prang lunod

[@TwistedTeej]

Never experienced katoda nag lean ung akin on the first part ng SS ko then upgrade ng 130cc 10holes injector naging ok nmn sya

[@jomelmarasigan]

Goods kaya 62mm allstock as in salpak lang

[@AriesaMedi]

Hindi mo magagamit ung power ng 62 mo kung stock Brad mag cams ka at valve spring solve

[@eugenelusdocjr8429]

Paps pag nag superstock ba may tendecy na maging sirain din or any issue? Natatakot ako mag pa superstock baka sumakit lang ulo ko

[@TwistedTeej]

Hindi nmn bossing basta right compression ratio lang pra di stress + better duration lobe ng cams

[@mohsenmilan8491]

Sir ask lng safe ba superstock sa long ride like north loop or bicol ride? Ganun kasi lagi byahe namin. Balak ko magpasuperstock dahil mabigat din ako mga 115 kg at lagi may obr. Para lang sana di lang ako mapagiwanan. Need ko rin ba mag palit ng gearings like 14t?

[@TwistedTeej]

Hi katoda yes as long as tama lahat ng pag kkagawa and alaga mo sa superstock.. kung ppalarin wla nang masyadong requirements balak ko pumunta nang baguio ulit kasama si twisted misis sa bday ko kung papalarin.. pra mapatunayan kaya parin ilayo ang mga super stock 🔥.. wag kna mag gearings ma compromise ng sobra ung arangkada mo kung same tayo eh talo kung di laging mahabang stretch kalsada sainyo..

[@mohsenmilan8491]

@@TwistedTeej salamat sir! 😁

[@erikjohnsales637]

Anu po pwedeng gawin kapag di lumalagpas sa 7k rpm kahit nka ecu na?

[@TwistedTeej]

Luhh di naman katoda grabe na aachieve nmn ung higher rpm sa pag ttimpla ng panggilid.. and nka depende rin sa angle na ginamit sa pulley..

[@samuelcabalteja1867]

Idol sana mapansin. Ano po magandang Gearings sa Aeroxv2 naka 63mm. Thanks

[@frylmadjus1947]

(2)🥺

[@michaelzamora3688]

boss twist tnong k lng kpg sa super stock ilang rpm bago lumabas ung VVA may npag tanungan kasi ako kpg sinuper stock ung motor ko 3500rpm plng daw lalabas na VVA?sana mapansin salmaat boss..

[@TwistedTeej]

Hi katoda hindi mo mapapalabas ng maaga ang VVA unless nka ECU ka at na program mong pwede lumabas agad ang VVA ng mas maagang rpm.. 6000rpm prin lumalabas VVA ko since stock ecu lng din naman ako.. and no need for ECU pag superstock bore lng makkinabang ng ECU.. sana naka tulong RS

[@michaelzamora3688]

@@TwistedTeej salamat sa info katoda kaya napaisip ako bkit 3500rpm lng lalabas na..balak ko kasi kaya nakuha ako ng mga info bago ko ipagawa..loc pla ng mechanic mo idol pra kung sakali sakanya na dn ako papagawa..slamat

[@TwistedTeej]

@@michaelzamora3688 no worries, taytay area si mikkonic's pde mo google maps di ka lligaw katoda search mo lng 😁

[@billygeorgelamorena861]

Idol ok lng ba palit segunyal mtrt +3 at piston ctech stock

[@TwistedTeej]

Dipende kung nka head works kna at nag reface ng head kasi bka umuntog.. better consult mech mo na nag buo nyan kasi pag nautog piston mo masakit sa damdamin

[@kathailander]

Hello papa jack... Ay, este katoda... hehehe

[@TwistedTeej]

Hahahaha malapit na tlga ko mag DJ kathai ano request mo papakanta natin kay OC

[@christianoliverenriquez7671]

paps applicable ba to sa nmax v2 ?

[@TwistedTeej]

For super stock katoda? Not really mas mataas na compression ratio ng nmax v2 and aerox v2 kaya no need palit ka nlng panggilid 😊

[@christianoliverenriquez7671]

@@TwistedTeej so hindi pala applicable na mag super stock sa nmax v2 ? mas maganda kung bore up ?

[@christianoliverenriquez7671]

@@TwistedTeej samalamat sir . rs palagi

[@TwistedTeej]

In my opinion katoda yes kasi mas maganda compression ratio nyo nasa 11.4 ata kundi ako nag kkamali? Kya pra sakin sapat nang tamang panggilid nlng or cams stage 1 for longer duration 😊

[@christianoliverenriquez7671]

@@TwistedTeej salamat katoda , Godbless you po

[@gabrielcasino1977]

Boss aerox V2 cams,gear, at pangilid okay na?

[@TwistedTeej]

Tingin ko kahit panggilid lang papalag na tlga ung v2 eh lakas humugot din katoda try ko mkahanap ng ma kka gauge na v2

[@gabrielcasino1977]

@@TwistedTeej SIGE katoda diko din alam if same lang ba gearings ng V1 at V2. at san ba talaga naka lamang ang V2 dami kasi nag sasabi malakas talaga.

[@TwistedTeej]

Katoda sa gearings sure ako same sila ng v1.. ang lamang ni v2 ang ginamit na head cylinder at piston is from r15 v3.. which is higher compression compare sa v1

[@gabrielcasino1977]

@@TwistedTeej Ahh yan pala dahilan katoda. So pangilid lang sapat na V2? Ano kaya magandang set ng pangilid boss ?

[@TwistedTeej]

Yes possible na gilid lng totodo na yan ✊.. full ST V2 ako so far nkka 126kph sa 1.4kms na kalsada

[@mr.danieljaeden3010]

sir sana mapansin.. okey po ba 63mm naka stock pipe?

[@TwistedTeej]

Naku katoda sa 62 bore alam ko pde at ang alam ko dipende sa pag kka set tlga eh

[@roldanmaltizo]

Boss ok na ba to super stock Camshaft + gearing 14t-39 + throttle body 32 mm

[@TwistedTeej]

Pinaka mahirap na sagutin yan boss honestly.. sa SS pde ka nmn mag gearings kung tlgang mahaba kalsada sainyo pero kung city lng pde stock lng pra mas mabilis mo makuha 120 kumpara sa nka gearings na hhabulin ka pag hit mo ng 120 kase mas may ddulo sila.. pde pdin stock TB sa SS basta nka headworks

[@Psalmwear]

Mas iba power ng boreup no?

[@TwistedTeej]

Sa 62 bore medyo malapit sya pero may mrramdaman mo prin difference 🔥

[@caspercanafranca9860]

Magandang tanghalee idol need po ba talaga paltan valve spring at injector ? Salamat po hnd ko pa tapos panuorin hahhaa gusto ko na din mag superstock malapit na mag 5 years aerox ko alaws pa kalikot hahah salamat ulit :)

[@TwistedTeej]

Hi katoda sa valve spring hindi nmn actually pero si injector most likely need tlga palitan pero hold mo muna pag ppalit after break in mo na tignan kung nag lean pra ma tancha mo kung ilang cc need na injector normally nasa 130-140cc injector ginagamit ng SS lagi dipende sa hinihingi ng makina ✌🏾

[@billyraydelapena4169]

Any idea sa gas consumption ng 63 bore?

[@TwistedTeej]

Hindi ko massabi pero as per my 62bore katoda around 33kpl pag long ride semi walwal everytime may chance

[@johnbrando2666]

@@TwistedTeej so magastos pala pag 63mm

[@gelocastillo6812]

SanaOL malakas

[@TwistedTeej]

Naku katoda di ako yung totoong malakas 😅

[@paterineaxcelb.8393]

Super stock plan mag 62mm

[@TwistedTeej]

Go for 62mm katoda 😁

[@johnbrando2666]

@@TwistedTeej bakit hindi 63mm? ano disadvantage ng 63mm

[@swooshmoto360]

Ultimate stock 🤫

[@TwistedTeej]

Uiii may bumulong saken nyan 😍

[@reynalynlcnl]

Ano po yung Ultimate stock

[@swooshmoto360]

@@reynalynlcnl check my youtube channel po

[@TwistedTeej]

Super stock + segunyal na +3 ot +4

[@OCRider]

Budol king! Hahaha!

[@TwistedTeej]

KALIGTAS is real 😂

[@henryarcangel7633]

katoda, may superstock ba kay mikkonic's ? magkano kaya abutin gusto ko din sana e ung may Cams, valve springs ska piston na dome or pang r15 planning din sana na mag superstock 100kg din ako hehe at nag aangkas din

[@TwistedTeej]

Hi katoda yes meron din sya using ung carried nyang brand.. roughly 10k aabutin lahat yan katoda.. wag ka mahiya mag pm sa page nya mabait ung si kuya mikko 😁

[@henryarcangel7633]

Ay sge2 slmata katoda, lagi ako nanunuod sa vlog mo e since preho tayu nka speedtuner and asul na aerox, God bless bro RS alwaya

[@TwistedTeej]

@@henryarcangel7633 maraming maraming salamuch katoda RS always

[@dya_messtv]

IdoL katoda san ang shop niyan ni boss Mikko?

[@TwistedTeej]

Hi katoda sa may east bank road taytay lang eto link pra di ka mahirapan maps.app.goo.gl/chCikFQXwG9MFZQk9

[@dya_messtv]

Thank you katoda, hm inabot ng sayo paps all in?

[@TwistedTeej]

@@dya_messtv kulang kulang 10k din katoda kasama costing ng piston cams at valve spring injector ko

[@vinzegenove3171]

idol nag palit ecu kana ba boss

[@TwistedTeej]

Hi katoda.. stock ecu parin ako nkpag SP read naman nuon all good ung sunog from idle to high rpm 🔥

[@ericbulos10]

Boss san location ng mechanic mo balak ko dn mgsuperstock

[@TwistedTeej]

Pwede kay mikkonics taytay or kay phil sa antipolo 🔥

[@TwistedTeej]

Pwede kay mikkonics taytay or kay phil sa antipolo 🔥

[@TwistedTeej]

Pwede kay mikkonics taytay or kay phil sa antipolo 🔥

[@ericbulos10]

@@TwistedTeej ano address s taytay boss

[@TwistedTeej]

Mikkonic's Tune Tune Up Overhaul Engine Upgrade maps.google.com/?cid=4255261020798783223&entry=gps

[@wencycruz2145]

Rs8 cams stage1 Rs8 valve spring +15% R15 piston Piston ring Valve seals 4pccs Okay po ba tong gantong setup?

[@TwistedTeej]

Better add headworks katoda to increase ung pumapasok na fuel sa chamber pra ma maximize yung power nang high compression

[@wencycruz2145]

Pero okay napo ganyang setup? Tas headworks nalang po?

[@TwistedTeej]

@@wencycruz2145 yup yan nmn tlga usual na pinapalitan sa super stock

[@jerspeedmotovlog]

Stock is good🤣

[@TwistedTeej]

Wahahahahahahahaa sa v2 is good 😂😂😂😂😂

[@reynalynlcnl]

Goods po poba kahit Primary Gear na -1? tapos super stock po.

[@TwistedTeej]

Kung SS mas ok padin nka stock gearings pero kung gusto mo mag gearings.. pde ung gearings ng nmax mas ddulo sa aerox yun ✊🏾