Affordable Lidl pressure washer: Parkside PHD 170 B2 test, with MJJC Foam Cannon Pro 2.0

[@sabotage3d]

Hi this was great pressure washer, but had to return as it was too loud. Can you please recommend a quieter pressure washer?

[@OCDaddyZsolt]

Hi, the problem is that most of these washers are between 92-97 dB, so not quiet at all. Parkside has one that is called "silent", but that was is considerably weaker than the PHD 170: kzbin.info/www/bejne/mJDCqISsrtCWja8

[@sabotage3d]

@@OCDaddyZsolt You have reviewed so many which were the most quiet from your experience? I need something quieter than PHD 170, but enough to wash my car.

[@OCDaddyZsolt]

@@sabotage3d I would say, some of the Annovi Reverberi machines were quieter, with the twin motor, when only one motor is used (but not using the full potential makes it pointless to buy those then). Is it too loud for yourself, or there are some noise restrictions in your area? If the former, then a noise cancelling headset could be one solution. As I said, usually these machines are over 90 dB and funnily, some that are claiming 87 dB sound louder in my opinion, then some that claim 94 dB...

[@sabotage3d]

@@OCDaddyZsolt Thank you. Anything slightly better than PHD110 silent with similar noise output? I guess I have to get something underpowered after all.

[@OCDaddyZsolt]

@@sabotage3d I think the PHD 135 is somewhere between the 110 and 170 in noise and performance also.

[@hectormorillo8547]

Great video! Based in your experience which one will you suggest Karcher K3, Stargate 180 or this Parkside PHD 170 B2? Regards!

[@OCDaddyZsolt]

Cheers :) The Parkside, as it has 3 years warranty. There is a newer version of it, you can see that test here: kzbin.info/www/bejne/gHvPopWmesh1d8k.

[@hectormorillo8547]

@@OCDaddyZsolt Great one! I would definitely like to get one Parkside C3 model. I will wait until Lidl brings it back on stock here in Hungary. Thank you so much Zsolt!

[@mxstic_7797]

What Orifice did u use on the foam cannon? Standard 1.25 or 1.1?

[@OCDaddyZsolt]

As far as I remember, at 3:09 it is the 1.1 mm and at 3:56 it is the 1.25 mm.

[@mxstic_7797]

@@OCDaddyZsoltCool Thanks. Did u have any problems with the 1.1? Any stressing or changes on the motor? Do u prefer 1.1 or 1.25? I have a Parkside 170 D2 and want to put 1.1 in foam cannon i just dont want to hurt the motor... would 100% prefer more watery foam than reducing machines life span

[@OCDaddyZsolt]

@@mxstic_7797 Had no issues with the 1.1 either. I preferred the 1.25.

[@davis1814]

Live your video. Could you please tell me what kind of hose connector this pressure washer has? I would like to know what kind of spray gun does it need.

[@OCDaddyZsolt]

Cheers, you need one like this: www.mjjc.com/products/5-spray-tips-and-trigger-gun-kit-suitable-for-lavor-electric-pressure-washers/?ref=OCDADDYZSOLT

[@OBongailas]

@@OCDaddyZsolt Thanks for the video. I just purchased a pressure just washer like that. I would like to change the gun coz the one that came with is very cheap. Have you changed the gun to the MJJC one? Can I ask which one I should buy to use it with my pressure washer? How does it works please? Thanks so much. Keep it up

[@OCDaddyZsolt]

@@OBongailas Cheers. It belongs to one of my neighbour and he didn't replace it, using the factory lance with it.This is the one that works with it: www.mjjc.com/products/5-spray-tips-and-trigger-gun-kit-suitable-for-lavor-electric-pressure-washers/?ref=OCDADDYZSOLT. I use a similar one on my Kranzle and used to have one on my Karcher K3 before. Much more convenient, with the quick release.

[@JS-fd7se]

Hi, great video. Can you post the URL/link so we can see the adaptor used (Parkside/Lavor adapter) where did u get it? I search for the adaptor and I'm seeing many different types of adaptors, not sure which one to order.

[@OCDaddyZsolt]

It is the Lavor. There is one type of it only. Link in the description, but here it is also: www.mjjc.com/collections/foam-cannon/foam-cannon-pro/?ref=OCDADDYZSOLT

[@seamusmurphy3383]

Hi. The hose and hose reel seems to be fully integrated in to the device. Is it possible to replace the hose on this with for example, a more flexible rubber hose?

[@OCDaddyZsolt]

Hi, good question. Pretty sure it can be disassembled somehow. The other question would be, since it is a device made for Lidl: Is there a rubber hose available for purchase at all?

[@seamusmurphy3383]

@@OCDaddyZsolt hi. I think there is. It would be under the generic brand name of ‘lavor’

[@OCDaddyZsolt]

@@seamusmurphy3383 👍

[@dexterkan9171]

Love your videos! Can I check what adapter you use to attach the mjjc foam to parkside 170 b2? Are you using the 1/4 quick adapter?

[@OCDaddyZsolt]

Cheers :) No, I used the Parkside/Lavor adapter, but at the beginning of the video, I didn't replace it yet. Realized it after editing and uploading, so left a note in the description about this "glitch" :)

[@dexterkan9171]

Thank you bro =) cheers!

[@donmarkon]

Hey man great video! Can you tell me which adapter PHD 170 B2 uses? Do they have their proprietary adapter or it is compatible with another brand?

[@OCDaddyZsolt]

Cheers ;) They sort of have their own. It is called Parkside/Lavor adapter.

[@nelsonbracho7913]

Thanks

[@OCDaddyZsolt]

👍

[@illegalnights]

does it have a foam cannon in the box?

[@OCDaddyZsolt]

I received the washer only, but as far as I know, there is no foam cannon in the box, only a bottle of shampoo.

[@toniosmani4919]

Does the karcher foam jet fj6 connect to a parkside washer??

[@OCDaddyZsolt]

No, they have completely different connectors.

[@toniosmani4919]

@@OCDaddyZsolt do you know a snow foam for the parkside washer,that I can buy in Germany,please?

[@OCDaddyZsolt]

If you use the link in the description for the MJJC Foam Cannon Pro, they send it from an EU warehouse and you receive it within 7 days. Choose the one with Parkside/Lavor connector.

[@AratoBalazs]

Miért nem lehetett ezt a tapasztalatot magyarul is elmondani???? Persze hogy magyarul egy darab videó sincs fent!

[@OCDaddyZsolt]

Majdnem az osszes videom fent van magyarul is...

[@AratoBalazs]

Bocsi én voltam a hülye, nem néztem meg a többi videód. 😉

[@OCDaddyZsolt]

👍

[@AttilaSimoncsik]

Pacek lett ocskosom

[@OCDaddyZsolt]

👍

[@markusdetailing516]

Hi, does the canon fit to the parkside 150 models also ?

[@OCDaddyZsolt]

Hi, of course. As long as it is either with Parkside/Lavor connector, or any other, which is available at MJJC.

[@markusdetailing516]

@@OCDaddyZsolt thank you so much

[@markusdetailing516]

Got the gun today..... It fit's !!!!! So happy 😅✌️

[@OCDaddyZsolt]

@@markusdetailing516 Enjoy :)

[@markusdetailing516]

Hi Zsolt, hope you can help me again. I have ordered the Short Trigger Gun from MJJC for my Parkside. Yesterday i have received a message that they dont ship to germany because of the tax. How did you get your gun to europe ? Any tipps ?