Get it here: bit.ly/425HPh8 Don't forget to use a coupon code "JT Makes It200" for 200$ off! By following my link, you can use my coupon code "JT Makes It200" for 200$ off! Or you can read more about the Gweike Cloud G2 in my very detailed website review article here: hobbylasercutters.com/gweike-cloud-g2/ *Links can be are affiliate links. I earn a small commission at no extra cost to you. This enables me to keep make review videos like this to you for free!
@thepbref7 ай бұрын
Great review, but the code does not work.
@Creutzfelder6 ай бұрын
Two Important updates: - GWEIKE lists the G2 now as "Compatible with Lightburn" and - Your discount code has expired. Thank you for the video. I really enjoyed watching it
@a.enguerrand51208 ай бұрын
Great review ! How do you compare it with the Commarker B4 ? Similar price point at the moment!
@JTMakesIt8 ай бұрын
You can also watch my review of the Commarker B4 and decide on the differences kzbin.info/www/bejne/gqe4poiFg7unnqc
@renaissanceman84246 ай бұрын
I tried your same settings for the coin image on a brass coin I bought in bulk on Amazon. I let the machine run for an hour and it still didnt leave any engraving. It was barely marked. I have no idea what Im doing wrong, but I feel like I've adjusted every setting I could find and it just wouldnt remove any material. Im thinking about just returning the machine.
@silentrainr4 ай бұрын
I wonder why your question wasn't answered??🤔🤔
@MrTimelessWinter7 күн бұрын
It might be that the focus is slightly too high or too low. Then it looks like its working, but its not actually doing much. Thats just my though. Since the focus point it very very narrow
@scanchrisyegАй бұрын
I cannot get mine to leave a mark on most stones. I have triple checked the focus, settings, etc. Not sure what I'm doing wrong. It engraves everything else just fine.
@JTMakesItАй бұрын
What speed and power settings you are using? And what kind of stone?
@scanchrisyegАй бұрын
@JTMakesIt i have tried low and high power, low and high frequency, I have tried a variety of stones. Worst part is, I have seen videos of 20w fiber lasers doing deep stone engraving. So I'm truly baffled as to why I can't get mine to leave more than a faint mark.
@JTMakesItАй бұрын
@@scanchrisyeg try different stone. It should be able to mark stone easily at 500mm/s and fullcpower. Does it engrave metals normally?
@scanchrisyegАй бұрын
@@JTMakesIt It has no problem with metals. I have tried a few different stones.
@JTMakesItАй бұрын
@@scanchrisyeg this is very strange. I never had any problems with stone on any fiber laser, even with 2W infrared diode laser there was never a problem. did you try dark and smooth stones too?
@Engage_Cards14 күн бұрын
Purchased one, Looked used when it arrived, I too could not connect to wifi, The USB sent with it, had the incorrect Config. Information. The Fixed cable from power supply to laser head had a short or bad connection causing the laser head to sometimes not turn on with the power supply. The only thing I asked for was a replacement be sent with an RA number so I would not have down time. Answer was no, So I ordered a different brand while dealing with the return. Not yet a company I want to deal with.
@jenniferdean78736 ай бұрын
Hello there, I loved your video. I had a parcel arrive today and it was blocks so now I know what they are for! I was wondering if you could help me. I have the same machine but the 110mm version. I really want to engrave rings (inside and out) however, I cannot seem to do it. I have the chuck tool and the rotary tool. I have asked g.weike to help, but I don't get very far. The rotary tool spins as it should, but the writing is just a mess. Do you have a rotary tool? Have you gotten it to work? Do you have any advise. Thank you for your time. X
@JTMakesIt6 ай бұрын
What are your settings? Is the machine in focus? What do you mean by engravings are a mess?
@matthewphinbow28347 ай бұрын
Are you filling\hatching the text for the wrench? What settings are you using please?
@JTMakesIt7 ай бұрын
Yes it is hatched. For general engraving, 500-1000mm/s, 30kHz, 30-100% power, 0.03-0.05mm hatch. Experiment to see what works best
@emilyraybabin8 ай бұрын
Are you able to add attachments for cylindrical objects? Such as rings?
@JTMakesIt8 ай бұрын
Yes, check the link link in description and you will see that they are also selling rotary attachment especially made for small objects like rings.
@vandalcustomleather98884 ай бұрын
Would this machine be appropriate for engraving/stippling polymer pistol frames?
@JTMakesIt4 ай бұрын
Maybe it could work, but for more versatility for plastics I would use MOPA: kzbin.info/www/bejne/iXOZh3qsgatjr9k
@JimmyWRe3 ай бұрын
I think this should work with Lightburn 1.7 and above
@tlsnv58857 ай бұрын
JT, Awesome video, what kind of file is the coin?
@JTMakesIt7 ай бұрын
Thanks! I googled "Star Wars Coin vector file" and found it
@mikasmith90964 ай бұрын
This is very informative! Thank you.
@JTMakesIt4 ай бұрын
Glad it was helpful!
@MrPanTarei7 ай бұрын
In your opinion is it worth to pay a lot more for this one or commarker b4 is better value for money?
@JTMakesIt7 ай бұрын
I have reviewed ComMarker B4 too. You can watch my video. ComMarker has smaller focus spot and supports Lightburn, this one is more versatile since the head is separate. It depends what you need.
@Makeup3602 ай бұрын
What will you recommend me for my jewellery business I want to start engraving F1 xtool or this one? Does F1 actually engrave or just mark the metal?? Which one is more affordable I m so much confused
@sadafafzal1732Ай бұрын
What is better?
@Makeup360Ай бұрын
@@sadafafzal1732 xtool is better option
@tungnguyen-mc4dz4 ай бұрын
do you have full instruction how to use the software ? i tried but the manual way less information about software
@JTMakesIt4 ай бұрын
You can check online for Seacad software tutorials, it is almost the same software.
@cruzlazaro95685 ай бұрын
Can you do deep engravings on gun?
@JTMakesIt5 ай бұрын
It works great on steel. If you let it run for multiple passes it can go pretty deep.
@chrisfalcon98048 ай бұрын
How many passes on the coin?
@JTMakesIt8 ай бұрын
Around 10 passes plus a cleaning pass
@bowstobourbon7 ай бұрын
Having a hard time deciding on this one vs the F1
@JTMakesIt7 ай бұрын
Watch my review of the F1 too. In my opinion, the F1 is easier to use because of the xTool software and it is more versatile since it can engrave wood too, but for strictly metal engraving, the G2 is much more powerful. (You can check my review of ComMarker fiber laser too, to het a hang on what fiber lasers can do)
@bowstobourbon7 ай бұрын
@@JTMakesIt Thanks! Watched both and i think i might go for the s1 with the 10w and get the ir addition for a larger work size, thanks so much!
@JTMakesIt7 ай бұрын
@@bowstobourbonYou are welcome!
@sebastianramirez12834 ай бұрын
This machine can use ezcad software ?
@JTMakesIt4 ай бұрын
I think it only works with their version of EZCAD. Quite similar software
@dharmeshgindra92267 ай бұрын
Price ??
@JTMakesIt7 ай бұрын
Link in description
@TheLouisianaHobbyGuy5 ай бұрын
The company name is actually pronounced, "gee-wee" 🤪 I was corrected by a tech on a phone call.
@JTMakesIt5 ай бұрын
Thanks for that, these companies can be a bit of a tongue twister sometimes :)