Bearings Change - Old Sawmill Repair #8

[@MASI_forging]

Nice work dude.👍👍

[@AFHProjects]

Thanks! You are allowed to share this video with others 😉

[@davidfinn3771]

Great job

[@AFHProjects]

Thanks!

[@wongndeso_sawmill]

trimakasih banyak boss

[@wongndeso_sawmill]

mantap bosss 👍👍👍

[@mechniack]

With split race bearings from SKF you wouldn't have to remove the shaft 😁 and with saw blades with exchangeable theeths you last longer bladewise

[@AFHProjects]

How can I remove the old bearings without removing the shaft? These teeth can be changed. It's common to change these when they get chips off.

[@lewiemcneely9143]

@@AFHProjects I want to see this too! He may be talking about poured babbitt bearings but you still have to pull the shaft to repour them. We shall see.

[@wongndeso_sawmill]

trimakasih banyak boss

[@lewiemcneely9143]

WHAT?? No Snow and Ice? How are you going to survive without freezing half to death? And your skin is already changing color! And no MUD and Water! This is a foreign land to you! Good job on the new bearings and the grease is the life of them. I don't blame you about the blower bearings. You'll have to repair the housing before long and then you'll have it in the shop with a big torch and maybe a hydraulic press to heat and ease the shaft out of the pulley. It was roaring but constant greasing will help it last longer. I've had mower bearings do the same thing and I greased them every use and they lasted till I could put new ones in. Happy summer, CHEERS and Blessings!

[@AFHProjects]

Yeah, time is flying. Especially my right arm, which is changing skin. I also 😅 Got the welding burn while wearing a T shirt. Yeah, I try to finish up with the logs before I ripping off this blower to maintain it. Happy summer to you too! Thanks for watching and for another nice comment, Lewie! Cheers 🍻

[@lewiemcneely9143]

@@AFHProjects I've got to 2nd your hard work and brag on you some. A good job is worth bragging on since it's so rare nowadays. DOUBLE CHEERS!

[@lewiemcneely9143]

@@AFHProjects Ad I like sawing videos too!

[@lakehunter48p55]

looks like you have done this before, good job, hope all goes well.

[@AFHProjects]

Not on sawmill 😁Thanks for watching!

[@wongndeso_sawmill]

thank

[@mechniack]

The fan bearings are dry and about to fail

[@AFHProjects]

Yeah, I haven't time to mess with them. No good tools for pulling the pulley and the fan from shaft. Bearings are noisy, but no big slosh in there. I have to mill these logs and then I have more time to mess with these. Thanks for watching!

[@lewiemcneely9143]

@@AFHProjects You did the right thing. Grease, grease, grease!

[@wongndeso_sawmill]

thank you so muach