AFTER LEARNING THIS SECRET, you will never throw away the old oil filter. A brilliant idea.

AFTER LEARNING THIS SECRET, you will never throw away the old oil filter. A brilliant idea.

[@thardyryll]

After learning this secret, I will never throw away my old belt sander.

[@Ozzy3333333]

LMAO!!!

[@user-hi8ye4mc2z]

такая хрень жаль своего времени

[@eric4847]

No shit!! Just wasted all that time for this bullshit.

[@dt9913]

EXACTLY!!!

[@mikecole2023]

That is so stupid

[@13767613]

After watching the whole video, I have decided that I'm not going to keep the oil filters, but rather, I don't ever want to see it again in front of my eyes. Great, and thank you very much.

[@richiec9077]

I cannot believe you destroyed that sanding pad for the nut 😂

[@cericson3426]

Yeah I'm still scratching my head after watching this video

[@jamesglavich1426]

A warn out grinding disc would make more sense, or the 5/8" nut is pretty cheap. If the filter has bolt threads, then back to the drawing board.

[@janbenes7044]

Exactly

[@janbenes7044]

The scissors will also be happy after cutting sandpaper.

[@alainmarcoux4156]

Économies de bouts de chandelles, atelier bien équipé mais le cerveau n'est pas là 😢

[@joemamaluc312]

AFTER LEARNING THIS SECRET, you will never throw away the old oil filter..... Yes I will...😁

[@urgenmasters4379]

Ок

[@malmes999]

me too lol this isn't a secret its madness

[@jasondroyd9373]

@@urgenmasters4379 Didn't you know they make drum sanders for a grinder.

[@johnjohn4465]

LOL !!!!!

[@Joe-SN]

10000 RPM. Ihr habt doch einen an der klatsche.

[@armelind]

Wow in order to save money to make this tool, I would have to buy a welder, a couple different saws and the grinder, tear up a perfectly good sanding tool, and dull several blades cutting the 60 grit sand paper. Wow! What a penny saver!!

[@dogduckchikin7588]

yeah he aint footin the bill some one else is. school or a fab shop.

[@Maciejka1955]

Ale narzędzia by Ci zostały do następnych prac

[@armelind]

@@Maciejka1955 Yes maybe so, but since I don't have the tools now, it means, I do not do much of that kind of work. (Google Translate:) Tak, może i tak, ale skoro nie mam teraz narzędzi, to znaczy, że nie wykonuję zbyt wiele tego rodzaju pracy.

[@bobbg9041]

You can use a 4" pcv pipe with a rubber pad on it or velcro to hook on the sandpaper why cut up a good belt for the belt sander. Your better off cutting the oil filter open to look at the filter materials inside for metal shavings. This will tell you thd shap of the inside of the motor

[@gustavwieden1326]

Dobrou jak slepit dva umělohmotný pásky a čim

[@Clunk49]

I like the improvised work table at 2:04, for the band saw, making it a vertical band saw, thanks for the idea!!!!!

[@ricilgrosjean675]

Красив Работа 👍,et si la meuleuse est fixé se serait Plus simple en maniant le bois, Beau boulot Très bonne idée🤟💥

[@joserubiogonzalez2526]

Estimados cada herramienta esta fabricada para determinado trabajo. Una *idea por genial que parezca* podría tener consecuencias negativas en un desperfecto. En este caso ese cilindro no está hecho para soportar fuerzas de más de 11.000 rpm

[@user-xv5ul2lw1l]

А что просто взять гайку нельзя, надо сломать диск

[@hugomarte7264]

Estas en lo cierto no le veo sentido a eso y el gasto que conlleva Acer eso y afinar no te rinde ningún resultado

[@miroljubilic8425]

Imate pametne stvari da se pogleda i nauci, hvala vam

[@PavelMachalek-if7sc]

A tu redukci na závit vezmu KDE ??? Upeču si ji v troubě blbe ???

[@briceallemand2951]

Pas mal,j'ai fait ça avec du tube PVC épais pour travailler des tube en fibre de verres( propulseur d'étrave pour bateaux),mais je trouve que le double face est un peu léger en résistance je préfère la colle neoprene ,pour l' avoir éprouvé ça tien bien🤗👍

[@kaysmeh]

Ju je

[@bebetofafi]

Parabéns pela aula... Agora eu aprendi a trocar um pneu de trator... 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@JoseLuis-oq3kx]

Pérdida tiempo jejeje y pensar que hay desocupados

[@dragannikolic1943]

Sta cemu to kad imaju specijalne i jeftine slajferice za drvo.

[@alainmarcoux4156]

Incredible, I would be so shy to post such a video, we all know a tool for this purpose and we call it, à belt scander. 😅

[@jetdr]

After watching this, I will for sure throw away all my Oil Filters and get a better sander!

[@jorgenarcizodiazegg1473]

Ok. Buen trabajo gracias

[@shimxininahi8024]

O lixamento redondo de uma superfície plana cria saliências irregulares. Tira de lixa plana para superfície plana não áspera. O projeto de reciclagem pode lixar superfícies curvas, mas o filtro usado serve apenas para reciclagem.

[@Marcelo-hf5zr]

Show boa ideia !👌👌👌👌👌👋👋👋👋👍👍👍👍👍

[@srstep4647]

Приветствую! А мне одному кажется, что Тем грибком, что распилили как донора, дерево обрабатывать значительно удобнее А гайку, гораздо проще купить Вместо того, чтобы портить готовое изделие? В общем, лайк за находчивость, но на мой взгляд приспособление абсолютно бесполезное Т.к. не надо изобретать велосипед, он уже существует

[@user-rb9jv9wq4n]

Я и написал ему.че гайку найти не мог нужную?

[@user-fr8dq3km4h]

Тьі - посмотри, скоко "Вэ Дэшки"" выливает!! Нерациональный!

[@andizfonseca4655]

Parabéns!!!! aprendi a desperdiçar o meu tempo. Gracias, por perder mi tiempo

[@hayatsanayi1238]

Aylak bakkal ayvasını tartar adlı çalışmasını izledik urgen ustamızın. teşekkürler urgen dayı 🎉🎉

[@user-hb5pn7bi8q]

Последнее время ролики с названиями: бриллиантовая идея, секрет и т.п. смотрю начало, затем поолистываю, а в конце вижу результат... Лучше огонь добывать трением! Быстрее приходит удивление на сколько человек продвинулся в развитии...!

[@urgenmasters4379]

Ок

[@user-dj9xc8wm8g]

Понравился кожаный фартук и смывка. смывка хорошая!

[@franzfelder100]

Fácil... requer apenas umas peças, máquinas, ferramentas, paciência e desperdício de material e de tempo! Ótima opção para quem não tem o que fazer!

[@eugeniosouza2702]

Oh, tio! Será que o problema não está em você? Desmerecendo o trabalho do próximo! Será que vc é bem mais talentoso? Reflita melhor! Humildade não faz mal a ninguém!

[@jorgealllonso4515]

Nossa muito inteligente, ja tinha uma base para colocar um disco de lixa, e fazer o serviço ,ai ele destruiu o suporte para fazer isso, perder tempo e mais trabalho!!! PARABENS!!

[@bradmottishaw467]

I just went to my garage and threw away 5 brand new oil filters so that I will never be tempted to do anything this insipid. Thanks for the reminder of "The right tool for the right job" by showing the opposite.

[@user-kn5yv6ir1r]

Узнал секрет,но всё равно выкинул старый масляный фильтр!😂😂😂

[@grzegorzprusko6316]

Oczywiście ten psełdo sekret był dobry 40 lat temu tyle że wtedy i kątówki nikt nie miał bo były trudno dostępne i drogie.

[@tirexi93bamberg3]

😆

[@user-zg2vz7pq5j]

И я тоже 🤦🏻. А зачем его держать, у меня две шлифки не каждый месяц работают, зачем ещё хлам в доме? 🤠🔥

[@ROVITTv]

Good job Sir.

[@mamaicupjayachanel2512]

wow..mantap..sangat luar biasa..💓👋👋👋👍👍👍🙏🙏🙏

[@felipealbertopenapupo3379]

Por favor, cuan sencillo es encontrar otras formas de hacer esto, Por favor!

[@sebastiaoroquedelimaroque4411]

Show valeu muito bom 👍🏾👏🏾👏🏾👏🏾🇧🇷

[@alittanagak2629]

Güzel fikir Teşekkür

[@urgenmasters4379]

belki daha iyisini yapabilirsin🛠️🔥💪

[@luigicappello2575]

Bonne idée bravoooooo.

[@user-ph6tl5tu6n]

Если хочешь по едалу фильтром или отлетевшей от него наждачки, можно сделать.

[@cozzyinternet4706]

brilliant idea indeed!! 😃 cheers for sharing!! 👍

[@raquelgarcia2980]

Excelente 👏👏👏👏👏👏👏

[@user-zw6fn5fy6b]

особенно мне понравилось как ( майстер ) добывал гайку на 14ть . жду ролика как из машины сделать самокат .

[@user-jm3ws1ww3g]

100% И я охуел! Мастер на всю голову!

[@srstep4647]

А я не помню, возможно там левая резьба? Как мне кажется, гайку купить намного проще

[@srstep4647]

Удивило в этом ролике всё Чел, ради гайки распиливает грибок для обработки дерева Тот самый, которым дерево обрабатывать очень удобно Из всего этого получается довольно странная приспособа Вовсе не уверен, что такой штукой обрабатывать дерево удобнее нежели тем самым грибком по дереву

[@user-gq3wj6pm5v]

@@srstep4647 болгарк конец это точно. 😅

[@urgenmasters4379]

🐈‍⬛

[@stephenhewitt5835]

Cannot believe you destroyed a sanding disc to get a locknut!

[@motactr8018]

I was gonna comment the same but decided to check if anyone else had already beat me to it! Lol

[@lexloose2112]

Ha, 3rd, had the same thought!

[@davetrevino1361]

yeah baffled me. Checked my local home depot and proper drum sander kit starts at ~$10 meaning the cost of the disc and the sanding belt are nearly the same price making this pointless and dangerous.

[@user-gn6di6fw3s]

Машинке придет кирдык очень быстро,большой момент нагрузки от фильтра с наждачкой на маленькие шестерни ушм.

[@hanemesmat2823]

ماهى الماده الرشه على الفلتر ماشاء الله افكر جميله الله يبارك فيك استاذ

[@adelistorres6366]

Muy buena idea pero todo ése proceso es más costoso que comprar uno nuevo... aquí en mí Venezuela hermosa

[@workonitm8]

I've never seen paint stripper work that good ! That's some really great stuff.

[@cozzyinternet4706]

me too!!

[@johnmccoy1254]

I don't know exactly what he's using but the Zep chemical company makes a product called Zep Off and it will do that to just about any automotive paint and will melt a fog onto plastics such as headlights and taillights.

[@timbabeu2005]

Oil filters are flimsy. That's going to bend and mangle someone's hand.

[@wilfridkolarik6110]

Very good ideas for the quality video and one job with the professionalisme. Very nice and champion.

[@krzysztofpramor3815]

Ile szlifierek to wytrzyma😮już fibra jest dużym obciążeniem. Ale kreatywne i niebezpieczne

[@user-rc1tl4op2j]

Смотрел до конечного результата ,за это время в ручную шлифанул куб досчечеков .

[@urgenmasters4379]

Два

[@user-rc1tl4op2j]

@@urgenmasters4379 два с п ире куром .

[@srstep4647]

😉)

[@albertorossi9937]

It would be cheaper buying a ready-made one

[@KH-je3sp]

7 minutes and 40 seconds of my life I'll never get back.

[@knobsdialsandbuttons]

Clever idea 👍

[@urgenmasters4379]

Ок

[@shemya071]

На кастрюлю тоже можно так сделать, если ручки отпилить и гайку ко дну приварить.

[@urgenmasters4379]

Будет круто 🤟

[@matheusesteves4599]

Muito bom ,porém eu ainda prefiro deitar fora ,é bem mais fácil

[@urgenmasters4379]

bem, se não for necessário

[@HenryLive365]

Mucho trabajo para un resultado inesperado

[@urgenmasters4379]

así es

[@paullarsen1330]

My angle grinder is around 20,000 rpm . this looks a bit dangerous for such a high rpm.

[@codefupanda]

That right there is what is called over engineering. Also known as a solution looking for a problem, and under delivers.

[@anatolpieruszka3388]

6:28 genialna fabryka kurzu! Sama krasiwaja, ot czto...

[@1Dakashi]

What is the paint remover you used?

[@gilmarparaol5677]

Acho mesmo que ele queria era mostrar as suas ferramentas kkkk

[@dioguitoramram]

e eu achando que ele iria recuperar o filtro para reutilizar kkk

[@Bianchi77]

Nice info, thanks for sharing it :)

[@TheHighKirk]

Interesting re-tasking of something disposable, good if you don't already have an alternative.

[@estil555551]

Genial super

[@GreccoRussoM]

Daña un disco de lija para hacer otro excelente 👌

[@EE-ih9nt]

Comentario irónico o realmente te pareció bueno esa flor de cagada?

[@GreccoRussoM]

Es como el francés que sacaba dientes sanos 🤣

[@EE-ih9nt]

@@GreccoRussoM sí un dolobu total! 😁

[@rond5661]

I can do the same thing with my belt sander without destroying anything and not wasting all that prep time with the filter. No thanks.

[@rchrdschmidt]

Thanks for sharing.😊

[@belkhirbenhalitem5909]

عمل ممتاز جدا

[@petrov5107]

Взял распилил шлифовальный круг, чтобы добыть гайку, когда можно было этим кругом шлифовать 🤦🏻‍♂️ сука гений просто 🤪

[@mattholmes2589]

When you realise it's just a 15mm bike wheel nut.

[@bogusawszczepanik4703]

This is the best free software Ive seen. Respect.

[@user-lw9zb2up7k]

Эту работу можно спокойно сделать и безопасней из того шлифкруга, который разломал ради гайки.

[@Trantekli]

Сними про это видео умный человек!!! Первое видео будет как раз на канале

[@SKG1974]

@@Trantekli & έρ*

[@lupilloguerrero6556]

🤣🤣🤣🤣

[@user-eg3ic2nz4b]

Для этого существует ленточная шлифмашинка.

[@stevenjordan6389]

What did you spray on the filter?Worked really good.

[@kirdot2011]

Paint remover obviously

[@vadimshink9257]

Зачёт твоему рабочему фартуку!

[@lexin.6483]

Насадку наждачки для ушм для шлифования сломать, чтоб сделать приблуду для шлифовки только побольше и не удобную. Не понимаю 😲

[@user-bd5pr6ye6q]

Из за гайки разломать шлифнасадку это верх совершенства

[@danielbordagaray6047]

con el trabajo que lleva me compro una lijadora de banda y listo

[@michaellewis6446]

I believe I'll keep throwing away my oil filters and just use my belt sander I already have

[@Pixel-uh6rd]

Мастерю деревянный АКМ, Готовлюсь к могилезации. Идея годная.

[@donaldfrazier5244]

No way of getting that 7 minutes of my life left

[@eugenegress5896]

Like my Father InLaw said Manny years ago, You got to spend alot of money to do all these handy dandy tricks and Tactics. The average person is not going to make that kind of investment, but to the Person who already has a Mirid,of tools, they can have fun with all the You Tube creations, and Creative they are indeed!!

[@Dan-cn3ei]

I never seen so much work put into something that there must be a dozen different ways to get a tool that would do the trick

[@davetrevino1361]

Terrible idea. Any balance issue, poor weld, or tape lets loose and someone's getting hurt. A typical disc grinder is hitting 9k-12k RPM. Really don't recommend anyone trying to replicate. You can get a whole drum sander kit to use with a drill (lower, safer RPM) for about the cost of the pad and belt you sacrificed. Or save up and get a belt sander which would be the right tool for what you are demonstrating your DIY drum on.

[@urgenmasters4379]

it was a creative experiment and in my opinion it will turn out well

[@davetrevino1361]

@@urgenmasters4379 Um, no. It might test fine, but poor balance and hardening in the weld area mean it will fatigue badly and fail. Given the rotational speed of an angle grinder that's a dangerous scenario. I just hope no one is foolish enough to try this themselves.

[@user-bv5xc7xg5y]

Приблуды как раз на одну доску делать тебе нех.

[@urgenmasters4379]

🛠️🔥💪👍🤗

[@cericson3426]

I guess if you have to make do that's pretty cool, but that's a lot of work for a drum sander

[@leroyhall8530]

Way more work than it’s worth must be done by someone who doesn’t work for a living

[@user-zmei125]

Да открытие века. Весь инструмент есть а вот шл.машинки нет

[@ricardonunez1311]

Hacia mucho tiempo no veía a una persona perder el tiempo haciendo artilugio, bueno fuimos dos que perdimos el tiempo el haciendo el video y yo viendo el video o todos los que vimos el video,

[@trueaussie9230]

You know you can BUY one of those 'lock nuts'?! You don't need to destroy a sanding / polishing pad.

[@SargeantKiller]

I can do the same with PVC pipe with much less effort. After seeing this amazing technology reinforces the tremendous value of my orbital sander....

[@rachmanabakarov9720]

да хорошая идея для быстрого уничтожения болгарки

[@user-xo1nd9ji5s]

Просто обалдеть,,😆

[@seeingeye14]

Flat sander better, won't leave groves from inconsistent sanding rate. Don't destroy expensive sanding pad, to get a collar washer just go buy one, better still, just use the sanding pad instead of wasting your time doing this.

[@armyvet92]

FIRST … I commend you !! It’s always awesome to see people who stop and think about creating things and about what they want to try or can accomplish !!! However, there are many other ways to accomplish this with half the effort

[@dedkotm6208]

And why would I bother with the filter when I can conveniently make the cylinder wooden?

[@joshuanorthern1863]

Exactly and it would be simpler than this.

[@johnvirgilwilliammccoy2332]

Not to mention, and destroy a perfectly good sanding disc pad. For a nut.

[@roseymalino9855]

What was the point of the pipe and ball shut off valve?

[@emanuelmifsud6754]

Many things wrong here. To grind timber with such a drum grinder needs slow speed. He is using mains power and the angle grinders I know are always high speed about 10,000 rpm way to fast. I do not know why one botherss to make such an item when I can buy a perfectly working secondhand belt sander for around $20 here in Australia. All the trouble to make it is a waste of time. The safety aspects are another consideration. A rotaing drum like he shows has the chance of injuring you. As it is not shrouded, and spining openingly the risks to the operator are much more then a belt sander. Imagine if the weld broke, that filter would fly of and potentially kill the operator. This is just another piece of stupidly thought out equipment.

[@user-wv7zk7sd4m]

Это каким же надо быть ..... чтобы разрезать из за одной гайки шлиф круг😱.....это все можно сделать не напрягаясь из простых деревяшек

[@leoiko.capital_plumbing_repair]

Просто купить их

[@aliongeli]

Atmayıp nereme sokacağım , Video daki malzemeleri nerede bulup ta aynı işlemi yapacağım , Asla atmayacakmışım😅

[@djamelfaci1310]

C'est quoi le produit que vous avez utilisé pour enlever la peinture

[@joaoqpapelaocoisavelhapidi6175]

👍 bem bolado?

[@chrisa1125]

I'm way too lazy, I would just buy whatever I need to buy to get a sander that would do the same thing. But hats off to you for the creativity! That is pretty awesome!

[@bobvecchi304]

Totally stupid. He ruined a perfectly good sanding disc attachment to salvage a shoulder nut that he could have bought for .25, then cut up a pipe nipple, and then wasted our time showing us what he used it all for.

[@onderakin3407]

I'm agree , totally stupidity

[@roldanjulianalberto994]

La moraleja es como armar una herramienta rompiendo otra .

[@pablorobertoojedagongora3069]

Innecesario hecho a perder una herramienta, pensé q reciclaria el filtro lavandolo y volver a usar,el filtro es caro

[@kekehasandogan7952]

Hocam mrb kolay gelsin yav ben baktım da göremedim her türlü envayi ceşitlilikte olan taşları toz şekline getirecek makina varmı böyle bir vidonuz yoksada bu taş toz etme makinasını yaparsanız cok iyi olacak sayğılar

[@urgenmasters4379]

Nasıl düşünmemiz gerekiyor?

[@DeepuSingh-qg3iy]

Paint removal spray name .

[@user-th4vl5wz4i]

Коту делать нечего,он от тоски Яйцы себе лижет

[@urgenmasters4379]

😁🥚🥚🔥