Agora Models Build the 1961 E-Type Jaguar 1:8 Scale - The Spokes and Rim - Part 1

If you want to get this for yourself head on over to Agora Models at
www.agoramodels.com . You can also head on over to their Facebook page at / agoramodelsuk
There is also a Facebook group to compliment this build at
/ agorajaguar
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my Patreon channel at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media:
www.linktr.ee/worldofwayne
My Amazon Store
If you like anything you see in these videos I have an Amazon store here. Check it out
www.bit.ly/worldofwayne
www.bit.ly/worldofwayneus
Get Amazon Music at
www.getamazonmusic.com/worldof...
We are building the 1961 E-Type Jaguar in 1:8 scale over 12 packs. This is bought to you by Agora Models.
#jaguar #etype #agoramodels

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@julianmhall]

Makes plank on frame look simple! Now /that's/ dedication to modelling!

[@nigeldeacon3271]

I've just started the wheel . First thing I did was tape the jig and rim together to eliminate a potential source of movement. I'm using thick PVA on the rim as it holds the spoke in place whilst giving wiggle room to make sure everything aligns properly.

[@davidbassett4577]

Now this is one NOT to tackle on “car crash Tuesday”!!! Or whilst you are on the Kraken Rum or Heineken! Well done with this part of Wheel one!

[@WorldofWayneUK]

Lol. It’s has been scaring me. I cannot lie

[@djstehle9061]

You are a man of great patience!

[@derekaxtell3016]

Just finished routemaster and ordered the Jag, was worried about the wheels so thank you so much for this video...excellent

[@rick_fortune]

Centauria's Ferrari 250GTO uses small bits of double sided on their wheels. Works well in their videos.

[@TDax]

I spent many 'happy' hours in a muddy field at LeMans with a full sized one of those wheels on my lap, cleaning the spokes with a toothbrush....took bloody hours lol

[@WorldofWayneUK]

I bet that was fun lol

[@TDax]

@@WorldofWayneUK the first hour was ok..l,after that it gets a little boring.

[@barrywhitlock141]

That was good but that is only the first wheel. You have to do it all over again and again.good job

[@raymond7880]

Great work Wayne. Very therapeutic. Must clean out the spokes on my classic!

[@donreid6399]

Good lord! This is only slightly easier than if you'd had the actual size rims and spokes on the E-Type and built the full-scale wheel!

[@mikeking2539]

Catching up with sprueVerse Live! Missed it the other night. Did not know it was Phil's 1st livestream. So was confuse at first. It will be cool to see you and Phill together in the US.

[@michaeljohnwicks2328]

Wow. Well done Wayne. I know I would have struggled with this part.I thinkI would have been like Clarence the Cross Eyed Lion at the end of this. Lol.

[@bobbybates2614]

It's the ultimate test to see if you start getting frustrated and losing your temper lol

[@et9]

Thanks Wayne

[@drn6073]

Very good Wayne that's what I call a wheely good build👍😁😁

[@WorldofWayneUK]

Lol

[@astraman1970]

Glad to see you using the advice I gave you a while back! As I’ve built the coupe version already and the wheels were a nightmare!!!

[@longtimelurker3591]

Agreed

[@dummbephotos]

Oh what fun, now you only have to do that three more times. Looking great.

[@mikehipperson]

FOUR more times, that was just the spare wheel!

[@TDax]

4 more times.....I assume the model has a spare wheel?

[@bedfordshiremodeller4491]

@@TDax All of these models hav sparewheels. I sell the sparewheels TBH as it's just uneeded excess weight

[@TDax]

@@bedfordshiremodeller4491 so as I suggested, it's not 3 more wheels to spoke, but 4

[@bedfordshiremodeller4491]

@@TDax Yep

[@rodadams8422]

Wow!! Talk about having nerves of steel fantastic job well done 👏

[@aztekdummy]

a welcome surprise video. Wayne the "spokesman"

[@WorldofWayneUK]

Lol. Very good. That made me laugh out loud which , in turn, got me strange looks from all the folks in Starbucks

[@pattersonmichael]

lol good one!

[@heavymetalit370]

Wow that had to take some patients awesome

[@mikeking2539]

🥺😱😱😱😖wow I can't imagine myself doing that. Well done 👍. (Haven't got to either as I don't have the kit. 🙂) Looking forward to more next week.

[@brnc77]

Hey Wayne, don't know about over there, but here in the states that's called lacing the wheel.

Na das wird ein Gefummel. Das Ergebnis überzeugt. Gruß Mario

[@WorldofWayneUK]

es brauchte sicherlich ruhige Finger

[@paulreynolds1510]

11 hours I sat down and did all 5 wheel for last jag build

[@milanondrak5564]

Wow they may be a little bit fiddly but the results look way better than a moulded or cast wheel would have looked.

[@longtimelurker3591]

Monotonous,boreing ,a bit fiddely is an understatement,I did some of these on the De Agostini release,OMG never again please , however as you say compared with Eaglemoss's DB5,s moulded ones they "look" far superirior.

[@plastiksurgeon9129]

Those wheels are kits in themselves! It is time consuming, but very well worth it in the end. I got pack #4 about two weeks ago…..I haven’t started mine as of yet. Been building something else for a show coming up next year, so I’ll keep all the packs safe until I can get going on it. Thanks for this clip Wayne…..I’m going to save it for future reference as I’ll probably need it! ☺️

[@pierreboone568]

well done

[@805madmike]

Gawd……and I thought the plug wires on the 917 were tedious….wow!

[@wobber999]

And I thought re spoking a cycle tyre was hard, well done wayne

[@steve1315]

Nice work dude , as stated by others much patience and steady hand needed

[@rickgregory9616]

Great video! Actually, I saw Agora's video on this, and though it looks tedious, it also is appealing to the amount of detail work involved. Gives a since of accomplishment! Bragging rights. Frankly I look forward to getting this build. I think the idea of micro-drop of glue may be an excellent recommendation; but I think I'll try to accomplish it without glue. One thing I like to say is: "No glue was used during the construction of this build!"

[@stevegraham4336]

well done on doing the wheel, what till you do the through spokes, i done the one with deagostini.

[@davidspencer8373]

Like video

[@dashriptide]

well only 4 more to do at some point in the next 8 packs of the type E after this one then. wonder if they got you g doing 2 in one pack and 2 in another or stretching them out like track sections. Also yeah the like i mentioned its all in the last 7 stages of the DB5 build you basically slap all the car together they defiantly changed a lot since that through the delorean and into the later cars like ecto 1 and jeep willy 2which makes more sense.

[@CodesmithSoftware]

Makes me think about doing the windows for the Enterprise D lol

[@udomartens9733]

Super 👍👍👏👏❤️❤️

[@anthonyhoward4718]

As I'm on the bi monthly plan I will have to wait until March for my chance to go mad. Fitting the 'eyes' on part 139 of the Bismarck was bad enough!

[@WorldofWayneUK]

I still have to do that. Going to make time for it next week

[@jeffd7557]

This has got to be the ULTIMATE " busy work " stage , why would they not just mold the spokes and rims together , it's not like it hasn't been done before 🤔

[@rodadams8422]

Because that my friend would be taking the excitement away far better to do each individual spoks than premolded like Wayne said it comes from the heart. If your not a into making models you wouldn't understand

[@dashriptide]

i want to say the DB5 was done with spokes molded and something about them was off or not enough spokes in the mold. and people modified them to be real like these are. and since a lot of the car is build it does give it a hand crafted novelty that you as a builder can point out that you actually put all the spokes in those wheels 1 at a time. ive been subjecting my mom to waynes videos and shes getting the idea that even though they are a lot of money the time you spend building them and then seeing them for yourself just how huge they are kinda justifys it. and watching wayne build a model is cool to see and follow but when you the guy in that chair building the samething wayne and others show on here you start to understand just how heavy and how big and complex they get to be with each model having different parts, not to mention it sets that model apart from another

[@plastiksurgeon9129]

Nothing beats the appearance of real wires than using ACTUAL wires. Tedious, but those of us that have been building a long time know how patient one has to be, to accomplish a certain “appeal” or “appearance”.

[@blue89irocz28]

The spokes are alot more simple than a Pocher1935 Mercedes .They had spokes and the fereal the spokes went into .Talking about small parts each wheel had around 200 parts or per wheel.

[@jeanlaverdure227]

Hi Wayne I really enjoy all your videos as they complement perfectlt the instructions. Was wondering why you put some glue on the first spoke and not on the others. Was it to keep the whole thing stable?

[@WorldofWayneUK]

Yep. Funny enough when I redid the spokes I never used glue at all. Just a steady hand

[@jeanlaverdure227]

Thanks for the prompt reply. I did many Pocher wheels in the past. I think these will be easier

[@larrysorenson4789]

At $800 bucks it better be the finest available.

[@richardslezak1274]

I may have missed it, but what was the total time to put all the spokes in? And you have the patience of a Saint to be able to do that in one sitting.....

[@WorldofWayneUK]

It was about 35 mins

[@kevinpayne5584]

God I love the way you answer people and get right back with there answer, you sir Wayne are brillant and a wonderful human being , I could only try to be as great as you are to people , this is why you have been given to the world Wayne to make others daytime shine. It's an awesome gift wayne, and I treasure you sir , sincerely kevin

[@jasonshiers5771]

If I tried this it would end up square.

[@mikeburnitt403]

I think I will put mine on some scale bricks instead.

[@WorldofWayneUK]

😂😂

[@julianmhall]

Would it be easier to do all the hub end first [for each level] and then attach the outer rim?

[@WorldofWayneUK]

Could be. I prefer to just get whole thing done and dusted

[@scottrandell4281]

I think if you look at what you did again, you'll realize you have the spokes wrong. The top spokes should only cross 2 of the bottom spokes. Yours crosses 3. You can see this in the Agora instructions at step 13 onward. You did exactly what I did. When you take it off and start the A/B spokes in the next stage, you'll find they won't work. I had to remove all mine and re-do them to only cross 2 spokes. Otherwise the next step, which is actually much harder than this step will never work and look right. I used double sided tape after trying to do it without glue or tape, that's a waste of time. Could be wrong about what you did, but having done and re-done mine a few times, doesn't look right.

[@WorldofWayneUK]

Lol you made me panic then. The angle of the pic is deceiving it touches the third spoke but only crosses 2 . I counted the diamonds and have 24 and it looks like the pic so I think we are good to go

[@scottrandell4281]

@@WorldofWayneUK good to hear. I just know how frustrating it is to undo those spokes and start over.

[@felimmahony]

Would have struggled with this but Wayne why you glue as the top that you screwed hold's the whole lot together you recommend glue them

[@WorldofWayneUK]

The glue I put on is microscopic. Just enough to hold in place while I work around but not enough to stick it permanent

[@felimmahony]

@@WorldofWayneUK Ok thanks Wayne good idea

[@thomaskelly8216]

Hi buddy where do you get those models from you have so many

[@WorldofWayneUK]

Different companies. I try to put the links in the video description

[@et9]

Wayne, Have you got a problem with 28 and 27 been wrong way around?

[@WorldofWayneUK]

? 28 and 27 .

[@et9]

Stage 27 and 28 of the jaguar

[@WorldofWayneUK]

@@et9 ahh haven’t got that far yet lol