Air Bagging a Chevy Crew Cab in my driveway

[@DJDOUBLE077]

Sweet ride...hope I get to live out that dream one day

[@joeyangeles5530]

Damn good work,that crew cab gonna look sweet

[@twistedc10]

Thanks brother. Thanks for watching 🙏💯

[@Teresuhseeyou]

Keep up that good work love the content!!!!

[@twistedc10]

Thanks fam 👍🏼

[@yomommajumprcables]

Damn I wish you lived in Va. Awesome work

[@twistedc10]

Thanks bro . I appreciated 👍🏽👊🏽thanks for watching 💯

[@jfjteldelasierra6222]

Mismo chasis? Se ve bien

[@metalhead24922492]

Where did the bag mounts & rear link kit come from ?

[@twistedc10]

www.airbagparts.com/

[@dangtz1985]

Hey homie, question do you need to drop it first with control arms, A arms etc then do bag setup for the front? I know the rear for sure C notch and 4 link but not sure about the front. Thanks!

[@twistedc10]

They sell a bag kit up front . To do it the correct way. www.avsontheweb.com/

[@16AZG]

Need this for my 2014 gmc sierra ASAP. Money talks very interested

[@luciousesimi3165]

any idea why my mountaineer toes out when i air out and toes in when i air up it can only be driven at a certain height bc the alignment goes everywhere the slightest amount of movement ruins it all and i can’t back up or the front end airs itself up and toes in any idea why it like that i can’t figure it out

[@twistedc10]

I have no idea bud…..

[@makepeace2850]

Great job bro👊.

[@twistedc10]

Thanks bud thanks for watching 🤙🏽🤙🏽

[@alexismoreno4706]

Nice job 💯

[@dragon123443]

Hey bro do you remember how you ran the wiring into the cab from the manifold? I'm bagging mine too but I have an extended cab

[@twistedc10]

Yeah!! You could purchase the kit at www.avsontheweb.com/…

[@dragon123443]

@@twistedc10 lol yeah I have one already. Did you just drill a hole in the bottom or stick it through an existing grommet?

[@twistedc10]

Drill a hole under the door trim and use a grommet…

[@joshua2677]

🔥🔥 can you post the parts needed to do this i would really appreciate it

[@twistedc10]

www.avsontheweb.com/

[@christophergarza510]

Do you still have the single driveshaft or did you switch to the dual driveshaft

[@twistedc10]

No customer change it to a 2 piece drive shaft. Thanks for watching 👍🏽

[@ryancraker7456]

Where you relocate the stuff under the hood?

[@twistedc10]

Someone else took care of that relocated the ecm fuse box and water resovor.

[@inlovewiththegto4559]

Beautiful ride bro! I've got a 2000 ext cab, but I gotta replace my rear bags. Think the ss6 bags would work??

[@twistedc10]

Thanks bud,thanks for watching 🤙🏽 and depends on your application. Either the slams 6. Or slam 7s just depends on your setup

[@suavecitosgarage4258]

Bigger bags usually give a softer ride. Im running the KP Components rear setup on mine and the Dominator 2600s ride real nice.

[@tombowman3058]

Hey man, what size wheels and tires are you running? Not sure if you mentioned it and I missed it lol

[@twistedc10]

Thanks for watching bud and it’s was a customer truck I believe there were 24s

[@tombowman3058]

@@twistedc10 cool cool, thanks man. Getting ready to start the process on my 06 crew cab, just trying to get all the info I can before I start. I’m an OBS guy so everything with the 99-06 is new lol

[@twistedc10]

Nice brother this truck I callab with someone else did all the fabrication all I did was just install the airbags and wiring.

[@chatobalencian1504]

What bags are you running in the front also what kit are you running all around whats all done to the front any drop spindles or just regular ones any mods done up front or is everything in stock locations?

[@twistedc10]

Thanks for watching and yeah drop spindle’s battery relocated fuse boxes relocated air intake also modified hot up avs for your air suspension needs 99-06…

[@twistedc10]

www.avsontheweb.com/

[@jrmrbigj]

How much you charge to bag same kinda truck.

[@twistedc10]

Currently not doing air suspension sorry bud

[@betoriosjr5777]

How much would it cost to bag the whole truck bro

[@twistedc10]

Thanks for watching bud this truck we didn’t do any type of fabrication work i just install the air suspension compressors wiring ect .. but I know that prices have escalated would have to call it in . Depends also on the set up you looking for and what wheels u trying to lay

[@Lowpsi]

Wheels aren't gonna hit the air line while turning?

[@twistedc10]

Negative I check for clearance wile stalling them 👍🏽. Thanks for watching 👊🏽

[@Lowpsi]

@@twistedc10 good deal,was just curious

[@JoseGarcia-pq1uh]

What system did you have on it because I’m lookin at some but don’t want it to sound like the compressor I want it to sound like yours when airing out

[@twistedc10]

Depends if you running valves u could use mufflers to silence the air being dump or . U could run a valve block there alot quieter… go on avs.com www.avsontheweb.com/

[@franciscoalvarado5142]

What kit are you using bro

[@twistedc10]

Avs kit.. thanks for watching

[@arejay5563]

Nice

[@twistedc10]

Thanks brother 🙏

[@randyhernandez375]

i’ve been wanting to bag my chevy 03 single cab.. and i can’t find good jobs in my town so kinda sucks :(

[@twistedc10]

Thanks for watching bud🤙🏽 what town you from ?

[@randyhernandez375]

@@twistedc10 i’m farrrr i’m all the way in tennessee 😔

[@randyhernandez375]

@@twistedc10 good video tho 🔥

[@twistedc10]

@@randyhernandez375 thanks for watching and supporting my KZbin channel 💯 big s/o to people in Tennessee 💯

[@danielz7936]

I have a 02 Silverado single cab if I wanna lay frame with 24 is a hyrdroboost conversion needed or am I fine without doing the conversion

[@twistedc10]

Would highly recommend the hyrdroboost u would also need to relocate fuse box and water resovor and air intake also fire wall must be tubed to lay frame . Thanks for watching 👊🏽

[@arejay5563]

👍

[@JrsKustomz]

Where can i get that link bar bro?

[@twistedc10]

Thanks for watching bud, and on the website @www.avsontheweb.com/extended-harness-for-avs-or-evolve-mv4c-valve-to-accuair-elevel-switchspeed-ecu/

[@jesusnavarro4362]

What kit is this

[@twistedc10]

Looks like parallel 4 link bags over axle with pan hard bar.. some else put it together. I just did the plumbing and bag installation

[@Smpgarage]

looks like its a AVS kit

[@raulcarrera1840]

Bro que modelo de airbag usaste en la parte delantera??

[@twistedc10]

SS7. Gracias por ver 🤙🏽. slamspecialties.com/W/product/ss-7/

[@raulcarrera1840]

@@twistedc10 gracias y muy buen trabajo bro saludos de chihuahua mex. 👍🏻👍🏻

[@twistedc10]

@@raulcarrera1840 Estodo compa arriva chihuahua 🇲🇽

[@arthurramirez5305]

Where Are you located carnal? I want you to bag my 83 chevy stepside for me.

[@twistedc10]

Central cali bro hit me up on IG..

[@arthurramirez5305]

@@twistedc10 i added u bro my name is Sidewayzbreezy 39. Arthur Ramirez

[@andrerivas1317]

Hey i love your channel man, i have been trying to bag my 03 silverado but people i talk to say that i need air struts. I see on this build you just used normal bags, how did you do that?

[@twistedc10]

Most definitely it could be done bro this truck I did not do no type of fabrication at all someone else did I just did the air management install but they have pre fab kits visit www.avsontheweb.com/

[@josenavarro1025]

What air tank and compressors were used on that ?

[@twistedc10]

380 Viair dual c.. with a 5 gallon aluminum tank .... thanks for watching bud 👊🏽

[@marthajauriqui5434]

👍 nice

[@SupremeVictoryStudios5377]

build my truck please

[@twistedc10]

Let’s get you booked in 👊🏾