Air Pressure Switch Install on Portable Air pump

This Video about adding or installing Air Pressure Switch , which help small air compressors to turn off when its not in use while connected with car battery , this is detail video , used Ironman4x4america Air Compressor for demo .
still did not find the perfect way to make hose for this pump but trying
Parts details below
Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4" x 1/4" x 1/4" NPT Female Pipe
tinyurl.com/yj...
Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4" Barb x 1/4" NPT Male Pipe
tinyurl.com/yh...
Fitting Adapter 1/4” Male NPT to M12 x 1.25 M12X1.25 Male Metric Coupling Stainless Steel Pipe Gauge
tinyurl.com/yz...
CompStudio 70-100 PSI Air Pressure Switch Tank Mount Type Thread 1/4" NPT 12V/24V for Train/Air Horn
tinyurl.com/yf...
Air hose fittings and Air Coupler Plug: Air Compressor Quick-Connect MNPT Male Plug Kit (Industrial Type D, 1/4-Inch NPT Male Thread, Solid Brass, 2 Piece)
tinyurl.com/yh...
Smittybilt 2781 5.65 CFM Universal Air Compressor
tinyurl.com/ye...
AIR CHAMP PRO 5.65CFM - 12V HEAVY DUTY PORTABLE AIR COMPRESSOR -Ironman 4x4
tinyurl.com/yf...

[@bryblanch]

Great tutorial. Using the shrink tubing gives it a clean look. 👍🏼

[@Adam-ox6zy]

Nice job. Makes these units much better to use. Thanks for the tute. 👍

[@lylewilshire]

Very technical term for the Allen key. " One of these things".

[@pete3103]

Absolute champion exactly what i was looking for

[@gmcworkshop1186]

This video was big help very good job thanks

[@TheQuirby]

Excellent video tutorial

[@tjaartrichards4865]

Hi, great video. Can you confirm the correct thread size for the male nitto connector going into the compressor. You said it was an Australian standard but I cannot find the correct part. Thanks so much.

[@T4TEST]

honestly i don't know but please see the detail in the description , i found correct adapter , its better to replace parts that easily available in US market , thanks

[@walterhughes5765]

The fitting you need is 1/4" npt male to m12x1.25 male adaptor

[@grn9209]

Are you going to mount it permanently in vehicle? Great job 👏🏼

[@irfanspace]

i m not mounting because this may damage the pump also its not hard to use just few minutes and u good .

[@EyalGrossfeld]

Great video. Helpful I can hear you say that the fitting that threads into the compressor is an Australian standard M2? Is that correct? M2? Are you sure? Because in the link you gave at the description to Amazon item there is nothing about M2? So i need to look for 1/4” to m12x1.25 in order to use the correct fitting. Please explain what is the M2 that you are saying in this video. Thank you.

[@T4TEST]

sorry for that , its actually M12 , not M2 , link in the description from where i bought this one and that the one it cost most , i tried to change connectors to 1/4 NPT because this is what we have available easily in the USA market and on very lost cost , i got these 1/4 NPT connectors from home depot , i was worried that if something get damage while i am travelling how i am going to replace that if not available so i replaced all of these .

[@nigelcollins5537]

Good video. Checking the adaptor you used was M2 to 1/4?

[@T4TEST]

i changed everything to 1/4 even on the Compressor .

[@danielpazzon]

Hi, instead of a fixed pressure switch, is there any 12V digital pressure switch option so you can select the desired pressure so the compressor stops when reached? Thanks!

[@T4TEST]

plenty of options available in the market , those battery optional portable air compressor .

[@danielpazzon]

@@T4TEST Thx I already have a compressor similar to yours, I was planning to modify it but I prefer it to stop at some specific pressure value. I'll look for a digital pressure switch.

[@ken-w]

Is the small black wire going into the motor a thermal overload?

[@T4TEST]

the tinny cable that going inside in the compressor you have to cut and to put Auto Shut switch in between , this cable is coming from Relay then going to switch and from switch output its going inside in the compressor and you have to cut in between . i hope i answer your question. no Thermal in the compressor as far i know.

[@ken-w]

@@T4TEST I found that it is a thermal overload switch.

[@miguelalagao973]

Mag kano pag kasama tangke at compresor

[@johnparks8216]

How to fix an old pressure switch on a 2 gallon husky air compressor

[@T4TEST]

i am simple diy dude , sorry can not help you .

[@oozger1]

Nice but you should fit relay because it will Burn switch in future