Air Ride Install Part 1 - VW T5 Camper Project

[@Graham_1978-r6e]

Loving your channel Dan. No bells and whistles from you, just plenty of knowledge that we are all grateful you are passing on. Thanks man

[@DanChambersDAC]

Thank you bud, glad you enjoy it. i really enjoy making the videos.

[@Simon_W74]

You were up in my neck of the Woods, which reminds me that I need to Pop over to Wymondham to see an old friend of mine. A very well thought out Air system that you are fitting to the van. The Landy in the background got me interest, as it looks like the body is off the chassis and someone has tucked a set of wheel in the arches. Now going to watch part two.

[@DanChambersDAC]

Installed well isn't it! The Landy is sat on a Beetle chassis! Thank you for watching.

[@JohnWD40TC02]

Great video Dan, those guys at Lowdown Transporters really know their stuff as this looks quite a complex conversion👍👍

[@DanChambersDAC]

Thank you bud, They certainly do!

[@preneshpakkiri5565]

Can't wait to see it done 🙌

[@DanChambersDAC]

Cheers bud.

[@t28wab]

Great video, glued to it even though 80% of it is way above my head🤣👇✊️✊️

[@DanChambersDAC]

Thank you bud. My Mrs said the same! Glad you enjoyed it mate.

[@LickyDischarge]

Cool! Just down the road from me. Very interesting video sir.

[@DanChambersDAC]

Thank you bud, Glad you enjoyed it.

[@johnrowell942]

Great video and looking forward to watching part two.

[@DanChambersDAC]

Thank you bud.

[@BIGmikeTheMADman]

🔥🔥🔥🔥🔥 as always.

[@DanChambersDAC]

🙏 Thanks dude.

[@timwincer128]

Just found you and am looking forward to seeing how your workshop comes together, I am disabled and spend all my time in my ManCave building Radio Controlled trucks cars tractors etc. I used to do builds like you are doing with your VW plus my three boys kept me busy doing custom jobs on their cars back in the day. Not sure what area you live in I am in sunny Felixstowe so if close by I would always come and hold a spanner for you lol.

[@s1_vbe]

Straight to the point , great video and love how happy u look when it's all done. Great job Dan and lowdown #chrishasamullet

[@DanChambersDAC]

Thank you bud. I am so happy with it! the vision I had is slowly starting to come together. Can't wait to get away camping in it!

[@RetroRewind77]

Looking good dude

[@DanChambersDAC]

Yup. Not urgent so will get sorted soon.

[@darrenparfitt1520]

Been waiting for this one 👍👍

[@DanChambersDAC]

Hope you enjoy it bud.

[@ring6630]

Great Video Dan loving it, Log burner flue should exit the building at 45 degrees for info 🙂

[@DanChambersDAC]

Thanks dude. That isn't a log burner 😉

[@colindyson8788]

I’m only half way through I hope u mention that Land Rover

[@colindyson8788]

He didn’t!

[@DanChambersDAC]

Sorry, I forgot it was there tbf 😂 Been an ornament in there for a while. It is a long term project they have on. They have done a series on it on the Dropworks KZbin channel.

[@plumpii7177]

Nice chip..

[@DanChambersDAC]

👀 that is on the to do list 😂

[@etinni8716]

This isn't 9am. Can't wait!!

[@DanChambersDAC]

Sorry man spent all day editing and literally finished uploading to KZbin about 7:45pm

[@downnoutmotors]

Part one done now heading for part 2

[@DanChambersDAC]

Thank you dude 🙏

[@wandango5913]

Loving the content Dan, I’m slowly gathering the bits to do my own, when funds allow, trying to follow this to work out the best places to fit everything underneath. It’s a bit of a mind bender following Chris because the footage is all reversed😵‍💫

[@DanChambersDAC]

Cheers bud, Yeah I forgot to check his camera and what way it was 🤦‍♂️ You will have room. Chris does explain the locations.

[@andyrew3717]

Loving the Land Rover 👍🏻 is it for sale 🤔 thanks, Andy.

[@DanChambersDAC]

Sick isn't it! It's a build for a customer but speak to Jack @dropworks as they could build you one.

[@davidramplin5291]

I, what do you use as your standard ride Height? I'm trying to get mine to a sensible low on air whilst driving. I'm accuair so if you could give a ruff measurement from ground to top of arch I'd be greatful.

[@bandit911]

Is this the same van from the first build where you sprayed it with rattle cans? Still looks great if it is, I've been curious how the paint has been holding up through everyday use

[@garethevison]

It’s a different van. Would be good to see what the first one looks like now though.

[@DanChambersDAC]

No bud different van. That one is still around. I got sent photos of it a few weeks back. It has had some changes made, not stuff I would do.

[@DanChambersDAC]

I got sent some images a few weeks back. It is still around but has had some other modifications....

[@martoonf]

Did you guys just mounted the compressors and tank with rivnuts?

[@chrisharris1442]

Hi Dan! How much does it cost to buy and fit the So-Low Suspension. I’ve got a SWB T5.1 t32 kombi??? The van looks awesome. Nice job 👌

[@DanChambersDAC]

Hi chris, best thing is to drop Chris @lowdown Transporters a message or call as there are many variables. Cheers bud, So worth doing.

[@mark_just_mark]

I wonder when we will see the ‘Chamber Pots’ merch? 😂😂

[@DanChambersDAC]

😂 Chris thought it was the best thing ever when he came out with it 😂

[@nickthorpe5990]

Will this system allow you to level the van when camping?

[@DanChambersDAC]

To an extent. You can level off front to rear ok but not much side to side due to the ant roll bars linking the sides.

[@cheesesteakjimmy2076]

How does it work for selling van on with notching structural parts ?

[@DanChambersDAC]

If you are open about what's been done it shouldn't be a problem. If someone interested in the van if I ever sold it was worried about structural cutting then it definitely isn't the van for them.

[@cheesesteakjimmy2076]

@@DanChambersDAC I have a t6 on air and with no cuts but was wondering 👍

[@brewdywilwil7298]

What make / brand did you use for your half shafts ?

[@DanChambersDAC]

They are Meyle bud.

[@admodz3292]

chip on windscreen needs sorting

[@DanChambersDAC]

on my to do list.

[@daylesmith9293]

How do we see part 2

[@DanChambersDAC]

Should be live now bud.

[@McKluskie]

you haven posted anything on the house for two months

[@DanChambersDAC]

Yeah I know. Kind of been a bit too busy keeping this channel going and building the house to be able to live in it.