Airfix 1/48 Supermarin Walrus 'Silver wings'. Full build with aftermarket in one video.

I build and review Airfix's 1/48 Walrus with some aftermarket

[@ralphford4302]

Jason, what a really nice build,, went back and watched on the big screen, beautiful work on the interior, you must have really been into this build - the extra care and attention to detail really shines, thanks for posting

[@anthonywilson2346]

Just bought the camo release version and am looking forward to building it. Found your video very very helpful and saved me a few bob on the aftermarket stuff. Due to lack of space I seem to gravitate towards folding wing version of 1:48 FAA aircraft (also spent 22 years as an aircraft fitter in the FAA so have worked on many of them seaking, buccaneer, Wessex V. Now looking for 1.48 wasp, and scimitar 🇬🇧😊

[@ModelkitStuff]

Have fun!

[@annemulholland6140]

Excellent

[@ModelkitStuff]

Thank you so much 😀

[@ianthomson9363]

Great job! I was commissioned to build a Walrus for a friend whose Dad flew them during and after the war. Looking on ebay, I found a few of these Airfix kits but also some by Classic Airframes, which were about half the price. I bought one of these, and the Eduard cockpit set, but to my horror, the kit was made in Czechoslovakia, with all the typical annoyances that these kits have: vague instructions, poor moulding, a distinct lack of locating holes and no part numbers on the sprues. I made a start on it, but I was concerned that the 8 struts holding the engine & upper wing were all separate parts and I couldn't think of a way of positioning them all correctly, which is fairly important. After I tried joining the fuselage halves together I was left with huge gaps. At this point I gave up and bought this Airfix 'Silver Wings' kit. What a difference! Everything fitted, the instructions were easily followed and there were actual locating holes for things such as the tail struts. Even better, the engine struts were moulded as part of the engine, so the engine was automatically positioned correctly. With biplanes I normally leave the top wing loose until the rigging's done, but this wasn't possible with the Walrus as the rigging wires go to the wings, not the struts. But by fitting turnbuckles to all the rigging points first, I found the rigging was relatively simple. I also bought aftermarket decals for Fleet Air Arm aircraft, as my mate's Dad was an FAA pilot. It built into a very impressive model, I thoroughly enjoyed building it and my client was overjoyed by the final result.

[@ModelkitStuff]

its a splendid kit, and was my fave Airfix aircraft until the Anson came out wow!

[@ianthomson9363]

@@ModelkitStuff I agree, and the Walrus is such an interesting design too. I've got the Airfix Gannet on backorder, I'm itching to get my hands on that!

[@stephenwhelan2515]

I have the walrus silver wings in my stash, so this video will be invaluable for hints,ideas and build guidence when I get around to building it. So thanks for this.

[@themagnificentmackrel6505]

GREAT PRESENTATION OF A FABOULOUS PIECE OF WORK YOU MADE

[@matthall143]

Thanks a ton Jason. I've got this kit in my stash, but have always been a bit frightened to start it. Your delightful and informative video has given me the confidence I need. Many thanks

[@ModelkitStuff]

Have fun!

[@iannicholls7476]

Well done, that’s a lovely build.

[@strelnikoff1632]

Loved the map. Enjoyed the program.

[@mattheweagles5123]

Beautiful work

[@arthurmee]

Excellent work and an articulate, detailed and informative review. I enoyed it and you've tempted me with this model.

[@mbak7801]

Just managed to buy one at a reasonable price. A much more popular kit than I expected.

[@randytaylor1258]

A lovely kit beautifully finished. And a wonderful trip. Bravo!

[@ModelkitStuff]

Thank you! Cheers!

[@samantharoberts351]

Really good video good job, it was hard to find a video this good for this model

[@ModelkitStuff]

Many thanks for the kind words Samantha, they are greatly appreciated.

[@ModelkitStuff]

It looked great at Telford Yesterday, I belive we should get it around end of the month

[@stevewilliams1769]

Jason, Great build - I like the Voiceover + stills format of this video.

[@ModelkitStuff]

Thanks 👍

[@greybeardmodels]

Nice job Jason, came together really well. Cheers 👍

[@ModelkitStuff]

Thanks 👍

[@stephenmcdonald7908]

Wow what a build s masterpiece 👍

[@ModelkitStuff]

Many thanks for the kind words

[@stephenlovelock5563]

Hi Jason,well what a cracking looking build by your self,really an inspiration,well done mate.

[@ModelkitStuff]

Glad you enjoyed it

[@RimsModels]

Great video my friend really enjoyed the premiere looks a really nice kit by airfix really liked the style of video everything was well explained thanks for sharing your amazing work 👍👍

[@ModelkitStuff]

Glad you enjoyed it

[@timwingham8952]

Lovely!!! Really nice build that captures the Walrus's ugly duckling look. Something you could add that would lift the guns more is painting the vertical edge of each ammunition drum an off white. Check out pictures - (I've used the guns for real) - Vickers K ammunition drums were factory issued with white edges. They got grubby very quickly, but were still noticeably white.

[@ModelkitStuff]

Thanks for the tip

[@mikeandtriciajohnson7241]

A very useful video, I have this kit in my collection awaiting it's turn, though it won't be for a while. I was a bit wary of so much silver and think that I would have preferred the camouflaged version but it wasn't available when I bought the silver one.

[@lesthiele7645]

Excellent work there sir, it is one of these aircraft you never see come out in kit form, well not in 1/48th scale, a very Merry Christmas and a safe and Happy New Year, best regards from a Kiwi living in Australia.

[@guypenrose5477]

A fantastic build. Just for info the Walrus had a radial engine not rotary.

[@randytaylor1258]

Yeah -- I caught that, too. Just a word slip.

[@ModelkitStuff]

multitasking what can I say lol

[@guypenrose5477]

@@ModelkitStuff I know the feeling! If you are anything like me I find the idea of a rotary engine quite mind boggling!

[@misterp1694]

Awesome Build! Well done indeed..I have the kit without the aftermarket parts and hoping it will turn out half as good as this (:>)

[@tinshedgames9310]

An interesting insight. As the Walrus is a staple Seaplane stand in. For 28mm wargaming. As a rule we normally pick up the Smer 1/48 over the Airfix 1/48. Normally because you can get three Smer for the price of one Airfix. Yes they're clunky and extremely dated. But their chunk and durability is part of their charm since they're picked up and bashed around on a regular basis. The Airfix kit is the version that's contemplated as a better option.However seeing your video is pretty apparent that it's just not worth the extra money in order to have that little more clarity in exterior detail especially give it'll spend most of its time being viewed from 3ft away. ( Plus mines water lined and painted in a WW1 seaplane colour scheme so historical accuracy isn't my first priority.)

[@scottfw7169]

Yep, models which 'work for their living' are a different ballgame from the true to scale builds. Is nice to have both options available.

[@blacknass1943]

10:45 how cool O_o

[@AFV85]

Hi, I understand about the bi plane wings your talking about being difficult, I'm away to start Tamyias swordfish now I've got the PE set for all that what should have really been supplied with the kit but the strut frames are done am odd way on this kit they have like a massive slot down the wings instead of just 2 or 4 holes to slide them into so I'm guessing I'm gong to have a bit of filling on this! But the swordfish is also a beautiful aircraft! I really like them spoked wheel's you have used! As for decals what I have started doing is matching the carrier film to my varnishes if there matt or a glossy carrier film for eg! I've just built andys HQ 1.16 sherman they decals were like rice paper and ultra matt they silvered like heck in a semi gloss varnish so it proved my point to myself copy the gloss coats to the carrier film's they'll work perfectly like your W!

[@ModelkitStuff]

the Tamiya Swordfish builds up well, I fancy making another at some point, yep you will be filling the wings, if memory serves the etch struts go on first and there is space for them so quite a gap.

[@johnt8636]

Wonderful build, but I have to ask: Is the map on a roller? If it isn't it would be upside down if you rolled out on the table.

[@ModelkitStuff]

! Its just a rolled up map mate

[@ModelkitStuff]

! Its just a rolled up map mate

[@sonnyd.6777]

Omg. . the ribbing inside was molded or separate part?

[@tallthinkev]

Rigging? Try guitar/bamjo strings, sometimes it works, sometimes it doesn't

[@ModelkitStuff]

I have recently seen guitar string being used, but as you say its hit or miss I perhaps wont. Thanks for looking in and taking the time to comment

[@tallthinkev]

@@ModelkitStuff Give it a go on some sprue and see how you get on?

[@roncalverley]

Thanks for the review Jason. Nice work! Re 20:35 Yes, worth seeing. kzbin.info/www/bejne/bJXQf6yqqJyZZ9k

[@ModelkitStuff]

Thanks for finding the link