Airgun "HOLY GRAIL" - Huben GK1

[@herbderbler1585]

Lewis and Clark took air rifles with them on their expedition to the Pacific because they didn't want to rely entirely on gunpowder. Diversity of technology is still useful in today's world in case things gets weird and firearm ammunition becomes difficult to obtain. To that end, it might not be a bad idea to have one of these around.

[@psycho6275]

Absolutely agree 💯 with ya and that was what made me "pull the trigger" pun intended, and get a .22 because that's all they had in stock and I felt strongly about this Huben. I listen to my gut and damn good thing too, simply love this ,maybe 5x more than my FX Wildcat Mk3 Compact. 30 😊 lol

[@granitejeepc3651]

That L and C rifle is at NRA museum.

[@JimRoberts-mg2kc]

wasn't an air rifle, it was a spring gun. took 2 men to cock and, supposedly, would knock down a buffalo at 100 yds

[@TheHeat55]

These guns at 45 joules will shoot through a frying pan (not a cast iron one). Not a bad idea to have around indeed 🙂

[@dangerous8333]

That applies to any air gun. This thing just misses the mark. Too big to carry and better options available for home and hunting.

[@perarduaadastra873]

Legally, this is not a magazine, for no pellets are moved from a magazine to sit in a chamber prior to firing. Hence, this is a revolver cylinder where one manually loads each chamber, which self indexes and self cocks the trigger.

[@blueplasma5589]

Also, shouldn't be printed "rifle" on the pistol, or is it better legally? It,s opposite of AR-15 pistol.

[@AckzaTV]

we still call our revolver cylinders "mags" in the airgun world. sometimes they do come in stick mags too, but yeah they are cylinders. but we think of cylinders as long, so we should call them Pucks.

[@perarduaadastra873]

@ Sure. :-) The distinction is only important because emotionally driven none evidence based antigun legislators in some nations prohibit “self loading” and not “self indexing” and “self cocking”. Anti-gunism does not like the fluidity and grace of a short time interval between shots, imagining in their minds that this is a special threat (to public safety) that must be stopped by prohibition. Hence, some nations have self indexing and self cocking airguns that would not be allowed if they were self loading. Anti-gunism is too often not about logic.

[@maurolimaok]

Finally a video where I see what I really want to see. Thanks!

[@heathhalfhill6401]

The hammerless system in these guns should be utilized more in the airgun industry. Super easy to tune, easy to maintain, and extremely powerful. My LCS is a tank and so worth every penny! Great system, and amazing guns.

[@SomebodysNephew]

At the performance you said for one of these I might actually get one for plinking. I can guarantee them 25cal pellets are cheaper than ammunition for actual firearms although I've not compared the 22 and 25cal pellets to anything yet. Certainly looks like a great time. Air guns are officially starting to get close to actual guns. They still have some room for improvement but I like how I'm starting to see some that are actually impressive in performance. I just wish they would start coming down in price but they are such a new technology being developed that I understand why they are so pricey. Now we just need the same fps in 45cal pellets and size reduced so it can be worn appendix carry and I see these being pretty popular. Would be interested in knowing if adding vaseline to the back of these pellets improve performance as they do in a pump action or if that is just because the grain is so low on .177 pellets.

[@ValTek_Armory]

You can even cast your own pellets/slugs from fishing weights

[@davidbrayshaw3529]

Air rifles/pistols are certainly an expensive "off the shelf" proposition. There is no denying that, especially with the high end options. But if you shoot a lot, when you're five or ten thousand rounds into it, they start to become a very good value proposition, indeed. The amount of money that you don't spend on ammunition is considerable. The other beauty is that you can use these things in confined spaces.

[@jaychristopher4167]

Actually.. At 4500 psi it ceases to be an 'air gin' and my. 50 cal shoots 900 fps

[@MikeKilo1969]

Please tell me that I’m wrong and you didn’t point that weapon at your face and perform barrel maintenance on it while it was charged and loaded!!

[@arthurvoitenko6789]

Yep...

[@johnsmithee6541]

I miss the phrase "let me show you its features!". 😂

[@pd1jap]

Wtch jorges Version then.....

[@EDCandLace]

HAAAAHAAAAHAAAA

[@angelgeeks]

Can you explain how you're able to set and get the compressor to fill to 5000 psi and automatically shut down when when the compressor promoted has a max of 4500 psi? tia

[@davidlaylon1235]

A large price tag for 2.5" plywood. Impressive none the less. Good job on that build.

[@kennythomas1107]

That wasn’t plywood, those were 1x10 pine…….but I heard him say plywood too!

[@ArrakisOCE]

How safe is it to store pressure for long periods within the carbon tank?

[@LoneWOLF-ku7mf]

won't hurt it, in fact better to have at least 1/2 filled

[@coldspring22]

@@LoneWOLF-ku7mf No. High pressure carbon tanks have finite lifetime and will start cracking. After expiration date it must be replaced or risk serious injury from explosion..

[@IndianArma]

It's not a carbon tank

[@CharlieDoubleWhiskey]

The only way to unload it is to fire it? Safety switch or not, i don't like that you're sticking that allen wrench in the barrel of a loaded gun.

[@andershovgaardmller1359]

This video made me so happy! Finally there is an air gun that does not suck and I see that I can pre order it in 4,5 mm, which is what I need for competitions in Denmark. 👍🏻

[@FarmerFpv]

My one critique of this gun is a big one. It damages the shirt while loading the pellet. Same thing with the Huben K1 Air Rifle. Which produces a lot of flyers. Make sure to hold the spring flap down so you're not putting any pressure on the pellet skirt. Or you will never get consistent groups.

[@Grarder]

I want one! That's so cool. Especially since in the start of the video I was thinking "I wonder if it has a suppressed option?" and then you installed one. Just awesome!

[@snubdawg1386]

hopefully i'll get one.....sorry for the maybe stupid question but who needs this in USA?

[@justnature1900]

Nobody we use real guns in the US lol

[@jrambo7495]

If you're a felon yes, this is an option!!!

[@AdamCeladin]

That looks SICK! Are you going to guys ship them to Czech in 45 joule version ?

[@GoGunCo]

we could try! but we don't guarantee your government will let you receive it.

[@AdamCeladin]

@@GoGunCo Hmmm we have new legaslation that you can use 45 joules if you register it on the local police station

[@crazyfrog4275]

Looks like a great airgun. But no robots?

[@GoGunCo]

robots are a bad business 🤣

[@danielgoodman3578]

​@@GoGunCoif you and yours can ever make robots work, that would be awesome.

[@youkofoxy]

@@GoGunCo More like: Robot are a hard and expensive businesses, it gets bad when you are trying to get then fighting.

[@Ronin1051]

​@@youkofoxy@megabotsinc More like 'Mechs must be developed with building the people's trust in mind, with the technology. BEFORE you fight them! 😉 Which means menial tasks (moving cargo containers, construction, etc.). It's gonna take nothing less than a grand Emporer Palpatine 20 year odd year plan to even get to fighting giant "robots", that are respected and acknowledged by the general public! Trust me! I work IT! I know how people are around tech!

[@MontyVaughan]

LETS GO!!!!! somebody finally smartened up and review this monster!!!!!!! What pellets do you recommend I have the .25cal

[@GoGunCo]

we sell em - gogun.co/products/jsb-25-king-pellets

[@MTNPANTS]

Post some vids of it! My .25 cal is on pre order

[@GoGunCo]

@@MTNPANTS we have them in stock and shipping next day. shoot us an email and we'll get you taken care of [e-mail]

[@nagbulos8669]

Good day, sir! Does this product ship to the Philippines? Thank you

[@MTNPANTS]

Can I just be a kid again and be super excited about this air gun! Got mine on pre-order

[@pz8280]

did you recieve it yet/?

[@MTNPANTS]

@dogman3362 hey, I grew up in the 90s. Don’t worry I’m qualified. 😆

[@DonaldBriggs-i9y]

How do you unload it the easy way for transport, storage and not have shoot the whole magazine?

[@blueplasma5589]

Maybe take out the magazine... Not shown.

[@logicone5667]

Can you leave it stored with air, how long will it remain shootable for defensive reasons with air staying in it?

[@1GLO919]

You need to sore it with air pressure inside, otherwise it can be bad for the seals. It remains shootable for a long time if it is airtight

[@TraceOran]

Keep it up my guy in time greatness will lift you

[@erminigil69]

I gotta say, if the first dude to use it instinctively let the lever snap down, the engineers should have designed it this way.

[@maxvan11]

Same thought. Isn't down usually hot and up is safe?

[@TurkeyEyes6690]

I think you can they just don't recommend it wears the parts Down you would think at this price would be using some good metals

[@ammoalamo6485]

@@TurkeyEyes6690 Pot metal all the way if any production is in Asia. It is cheap, and you can always blame the user when it breaks. I had a 13mm shaft on a small air compressor twist off like a Tootsie Roll just from ordinary use - this happens when the contractor gradually removes quality or materials over various production lots, just to save pennies. Read "Poorly Made in China" for an eye-opening look at how Americans get shafted when they send their specs overseas for production there.

[@stibaer573]

Has this enough power for hunting a deer or bore?

[@ATCRyderX]

*Probably* but that's very illegal in most states. & *Much more importantly:* Inhumane. Although this beast would likely be the *least* inhumane - Still not the best idea.

[@psycho6275]

I love mine in .22 and will get a .25 and maybe even a K1 bullpup in .25.😊, gotta a few to move out first ,nice ones ,but I go to the forum for that. Huben really impressed me with this pistol. It's small for a pcp pistol, it's got large capacity mag, AND this little s**t is powerful ,very powerful but loves the air up in the 1000+fps range with 18gr

[@MRSketch09]

Wow... kinda crazy what Air rifles can do... I wonder what the seal life is?

[@stupitdog9686]

Seals have a good life as long as they can get plenty fish.

[@marcd1981]

And these pistols are pretty good, too

[@Austin080]

​@@marcd1981Better be good for the price tag.

[@mobilemiall]

Is this gun regulated? And how many shots per air fill (within 4%ES) for .22 and .25? And what is max air pressure?

[@Jaden48108]

The answer to that is you'll want to fill the gun back up to pressure after shooting all the rounds that are loaded. 5,000 psi is max air pressure for this pistol due to its carbon fiber tank. It could still fire way beyond that pressure- such is the strength of carbon fiber. As an airgun enthusiast getting to 3,000 psi is an achievement in and of itself. But 5K? Wow.

[@TheRealWindlePoons]

@@Jaden48108 But is it fitted with a REGULATOR?

[@Jaden48108]

I'm the wrong person to ask. I believe most guns are to keep shots consistent so you can actually hit what you're aiming at, but that's a guess on my part.@@TheRealWindlePoons

[@sunXsun40]

@@TheRealWindlePoonslate but still, no, this pistol is not regulated.

[@zenos.5315]

$1250 for a pellet gun? YIKES!!!!!

[@michaelvasquez3995]

Well yah it does more fpe than a 22 pistol lol

[@StefanWiehlandLWT]

1700 Euro in germany! 😢

[@igor0155]

1250 for 19 rounds of silent deadliness

[@steve2jz664]

​@@igor0155can get a silent "zombie" kill with a pistol crossbow for under 100 bucks

[@dr.riccardo3575]

It's a gun that is exempt from firearm laws

[@Harolddespui]

You set the compressor to 5000 psi, but it is rated 4500 on your website. Doesn't that give any problems?

[@JaleelJohanson62]

The gun is rated to 5000psi by Huben. It runs quite fine on 4500psi. My .22 Huben GK1 setup to give me 750 ft/sec with 18.1 grain JSB pellets gives me 45 level shots off of a single charge. Amazing!

[@Harolddespui]

I know. I was talking about the compressor which is rated 4500psi but he set it to 5000. @@JaleelJohanson62

[@MarioLuigi-vb3rp]

I want this stock setup and everything included can’t find it on the sight

[@headlightman]

Can you leave it full of air?

[@MontyVaughan]

yes of course you can...

[@LessThanLethalGamerZ]

You store it with air not empty.

[@domingoliao2724]

Is the adapter for moderator is included with the pistol ? & is it 1/2 U.N.F. in diameter thread?

[@brockdelorenzo7505]

Can you use a regular bicycle pump to pump this thing up? I’m thinking about off grid when there is no power or solar. Gun looks awesome.

[@GoGunCo]

You can use a hand pump, but it has to be a special high pressure one. "PCP Hand Pump" is the google search you are looking for! we also sell them at gogun

[@tracyboen3493]

pcp hand pump ==2 mouths of pumping for 4300psi

[@donbaxley5530]

Would pellets penetrate more if made of titanium?

[@dangeroustoman]

$1250.00 you can buy a couple of real bangers.

[@removedot]

I think their market is pretty much people that aren't allowed to own "real guns" (felons mostly) and people into curiosities

[@satuurn5245]

Felons can't

[@Harper2.0]

None as well made. This is also backyard friendly, and the ammo is dirt cheap. And some people can’t legally own firearms

[@CygnusX250]

what does suppressed sound equate to .....is it tight neighborhood quiet, is it like unsuppressed springer, what other airguns does it compare to sound wise (suppressed)

[@turbolag5107]

If it is anything like my Air Venturi Avenger with a DonnyFL Tanto, it quieter than the fart you tried to hide in school when everyone heard it anyway lol. Seriously though, they are whisper quiet when suppressed. I would say about half as quiet if not more than half than a Gamo Swarm .22 cal. gas piston air rifle.

[@CygnusX250]

@@turbolag5107 its not like an avenger, avanger seals barrel with pellet probe and oring, the huben is like a revolver, so air can escape out around the cylinder/mag as well as muzzle (same with lesihy 2) there no way to quiet down what air may escape around cylinder/mag ...i did go buy one in .22 and was impressed with the sound at 300fps being just fine for backyard shooting with no moderator on....upped it to 630 fps, and mod is needed and is enough to keep it backyard friendly.....forget to count how many shot are left and accidentally dry fire it , and you will hear a loud snap, as supersonic air squishes out next to mag/cylinder ...moderator does little to suppress dry fire noise....gun is awesome, light, great trigger, tons of shots per fill at moderate speeds im getting 60-80 shots around 630fps jsb 16gr.....i tried dialing itt up further and was over 1000fps, but it was loud, and consumed a lot of air, but very impressive thatt it can push 30-35 fpe out of that short barrel...in short i love it...i want a .25 now, and who knows maybe the bullpup 🙂

[@regratteblehammer167]

What's the shot count of the .25 with the power setup you had when you were showing us the shot string

[@GoGunCo]

Not sure! Only fired one magazine, then stopped.

[@m4vr1ck]

Where's the Megabots stuff? Please don't tell me there no more mech duals in the future 😢

[@jordan-mn6yy]

Good setup to compare the performance with and without using the moderator. and a tight grouping that is

[@lastchanceshinythings47]

would prefer foster fill connection... and a separate gauge for the tank fill pressure... same issues on the K1 bullpup

[@gfg5622]

Nice safe shooting how can you load air

[@marcothejudge9885]

Both calibers same joule? Which caliber u used to kill the wood?

[@GoGunCo]

25 cal for the wood!

[@DivergentDroid]

If the tank it losing pressure with each shot how can you get more fps on the last round than you had with the first?

[@michaelparker2817]

Will it shoot 25 cal slugs from airgun depot?

[@MrJoeygregory]

I'm curious, is this a backyard friendly gun? Or would it need a Donny f? L?

[@Americadoe]

What is the tank made of? Carbon fiber?

[@superandrea13]

Good morning,please let me know were can I buy one. Thank you

[@noahgrady3628]

Do you know how many rounds you can buy for 1250.00???

[@jtrader1251]

How long can it retain it air pressure if not shot. I'd like to see 3rd party testing.

[@Iceman247ue5]

compressor makes no noise ..yeag right

[@KoalaTContent]

A hand pump or something would make this a fantastic apocalypse gun! A bag could hold thousands of rounds

[@arekpetrosian4965]

I got mine in .25 caliber a week ago, and I used my hand pump to get it up to abut 4300 psi. Took a bit of muscle power, but very, very do-able and for a SHTF scenario, it would just fine.

[@theFormidable1]

what's the maximum PSI this gun fills up to anyway? I have the G9 pump from Air Venturi which is rated for 4500 PSI, it came with my Gamo Arrow ( which broke btw) can I use that and will it fill up to 5000 PSI that this guy set his compressor for?

[@arekpetrosian4965]

@@theFormidable1 According to the manual, the max is 5000psi. My hand pump will go to 4500, but I got tired at 4300...LOL

[@theFormidable1]

@@arekpetrosian4965 ok thanks I seethe hatsan blitz is down to $700, I might get that instead

[@airfogsbv8578]

How many pumps until it’s full of air?

[@plightn]

How long does a gun hold the pressure, let's say you are using for self defense?

[@albertxiong7000]

How much if includes scope? Tell me where to order one for me.

[@JeffKlavir]

I'm new to PCP air guns, how many shots do you get when fully pressurized, standard power?

[@ricko2766]

so when they gonna make a carbine version in .22 cal with a built in moderator for backyard pesting and some pic rails?

[@bradleykanian4786]

I wonder if the exploding pellets would work in this gun

[@PepeTheFren]

Me too. Let me know. 🤓

[@crapthisisalongusern]

The zombie test was done with which gun 22 or 25? going to purchase one would like to know!

[@CookingAndDogs]

Can you leave the air presure full so is ready for home defense use?

[@GoGunCo]

yep!

[@CookingAndDogs]

@@GoGunCo so you can leave high pressure in the tank, ready for use for months at a time?

[@jonnymak1079]

Can u use a hand pump to fill it If so ill buy it

[@RAHULKUMAR-lg2zw]

Whats the effective range of this gun?❤❤❤

[@bradleykanian4786]

Did you say 5000 psi to fill the chamber? what air compressor goes up that high?

[@GoGunCo]

We were using a 4500 psi compressor. Phil was all hopped up on ZYN at the time and playing fast n loose. The 4500 compressors we sell can be pushed to like 5000 but they'll struggle. we were abusing it.

[@mpe777]

When will a .30 cal or higher be released? Evanix is already out with one though I believe it tops out at 33 FPE

[@GBR1111-x2t]

Where is this c02 gun being shipped from. ?

[@GoGunCo]

Orlando, Florida! But it's not CO2. Just regular air, compressed.

[@nr01vid]

Hi, do you lose power with the moderator ? Thanks

[@GoGunCo]

Nope. you actually gain some, since it has a similar effect of extending the barrel

[@christianrabe7984]

Is there any compressor other than yours that delivers 5000 psi?

[@GoGunCo]

Not sure, 5000psi guns are quite new/rare, but I am sure more will come out soon!

[@paul.etedder2439]

For 1,250 dollars you can keep it .

[@Milpower]

Agreed. Fvcking insane.

[@REAPER3303]

1549 with suppression to US

[@goldgait1]

Yeah because ammo for firearms is so so so so so so so so so so so so so so so so so so much cheaper and I don't care that some people can't own a firearm. Large brains need large hats

[@Gibblegobblegoob]

There's more engineering that goes into this than a firearm the price tag is deserved you wouldn't be interested in this anyways

[@thirdsamuel6643]

Ain't no way I'm buying that, rather have a slingshot.

[@leonholmes3125]

Do you think this could work as a home/self defense tool?

[@nudl3Zz]

in a case where you are not allowed to have a real gun but you are allowed to have this. it would probably work fine

[@Mister.45]

@@TtMm-tp8sb Theres a video of someone getting 85 fpe with this gun,this video doesn't show that but its definitely capable with power similar to a 22lr pistol

[@patrickscalia5088]

Absolutely. Provided you deliver with competent marksmanship. As cheap and -- with the suppressor -- convenient to shoot as this thing is you'd have no excuse for having anything but ace shooting skills. With the suppressor and a suitable backstop (fireplace, brick wall, etc.) you could probably practice in your living room even in an apartment you could practice every day if you wished. Again, with the caveat that you have a SUITABLE BACKSTOP. As to its effectiveness, well at close range this pistol should be able to penetrate the chest wall and the heart, or the skull and that makes this a lethal weapon. A few well-placed shots in the face would be enough to discourage, disable, or even kill an attacker. But as with all guns shot placement is king. It doesn't matter what you're shooting, a .22 or a .50, powered by air or gunpowder makes no difference. Shot placement wins altercations, not magazine capacity or bore diameter. And as stated, you'd have no excuse whatsoever for not being a deadeye shot with this thing. Beauty is in the eye of the beholder, and to me this Huben pistol very much is the holy grail. It checks so many boxes that no other airgun ever has before. At roughly .22 LR power levels it has the power to kill small game and serve as a defensive weapon if the need arises. It has more than adequate shot count and high mag capacity. And one area where it positively smokes all other PCP handguns to date is that it manages to pack all those virtues into a package that truly is pistol sized. Comparing it to something like the AEA HP Max is not valid at all as calling the Max a 'pistol' is something of a stretch. I have one and I love it, particularly its combination of massive power and compact size. But it's a carbine, not a pistol. You're not going to see many people out walking the woods with a holstered Max hanging from their belt. The only other genuine PCP handgun I consider powerful enough to be at least an expedient self-defense weapon is the Rex-P, but for a handgun it's huge and clumsy and heavy and for self-defense purposes the single-shot and slow reload heavily weighs against it. What are my qualifications for stating these things? I'm a former metro police officer with years of experience in a crime-infested armpit of a city. I've exchanged bullets with bad guys and I've unfortunately had to shoot someone. Doesn't make me an expert at anything but I'm no amateur either. As always in discussions over using airguns for self defense, the idea is that the people wanting to do this can't possess firearms for this purpose for any number of reasons, most of them related to strict laws controlling firearms possession. Nobody is suggesting that someone adopt an air gun instead of an appropriate firearm as his primary self-defense tool. But there are so many places, or legal or other problems individuals have, that prohibit firearms possession or make it so impractical that it might as well be impossible. For those people yes the GK1 is looking pretty holy-grail-ish lately.

[@Mister.45]

@strangerdanger4167 You can store the air indefinitely,that's why there are called Pre Charged Pneumatics,if a leak happens then it needs to be repaired

[@DrSteveMorreale]

Nice to see the innovation and technology getting so good. I'll wait until there's one that has a less frustrating process to reload/unload and that can have the pressure tank depressurized for maintenance and storage (and for general safety). Very nice gear though, I'm sure in some future version it'll have even more awesomeness.

[@bobjoatmon1993]

Huben GK1: Can ANYONE tell me if there's a limit stop for the power adjustment screen? Or does it back out until it falls out? Or blows out under pressure? I am trying to find out just how far the power screw can be adjusted. I have a reconditioned GK1 .25 that seems weak even with the screwed bscked out 2-1/2 turns. I'm shooting 25gr pellets with a full fill yet only getting 720 FPS which is much less than others are claiming. Can I turn it out 3 turns? Out 3-1/2?

[@Btvp]

Abortus = about, sorry Dutch autocorrect😅

[@GeoMichelobe]

How does it get so much power from a smallish air tank .amazing..some other guns have huge air tanks and only get like 7 shots...and much less FPS...must have tech that no one else has apparently

[@ruffhausmalinois]

Yeah Good call doing a demo and working on the gun while it's loaded. You should do the same thing with the three fifty seven

[@bigtwon8590]

When can i buy the compressor??

[@Cyberdyne_research]

Anyone know what happened to eagle prime?

[@jdrums5555]

Hi Mark it's Jason just wondering when your going to be putting out anymore gun review videos hope your doing well 😀 👍

[@Joe-hx7ob]

tight grouping. just need to adjust those sights up a bit

[@MrMatthewliver]

I have just one question about filling. I have just got my Huben GK1, but I have noticed that the fill probe does not fit to my Hill MK4 hand pump. Have you got any idea how to fix it? Should I buy a kind of adapter/converter, or simply another, compatible filling equipment?

[@LOLBTLOLBT]

5000.psi in a carbon fiber tube?

[@Avg_Janitor]

I wish it was more affordable. Looks awesome

[@F.S.1985]

You should take cost for ammunition into your calculation, because if you really intent to shoot and not just want to own it, then then this is where your wallet will suffer most...

[@MrBillcale]

can i ask price or is that a no no? sorry if it is

[@randycanedoinaction910]

How can i order im in the Philippines... 22 cal.

[@beav1962]

Did you "quiet" the sound during the zombie test? It doesn't sound any louder than when you have the sound moderator accessory installed.

[@turbolag5107]

The microphones don't do it justice. You can have a suppressed and unsupressed air rifle shot back to back in a video and you couldn't tell much difference in volume but rather just HOW it sounds. a suppressed air gun is stupid quiet.

[@RonnieSixx]

Could I fill it with a shop compressor?

[@blueplasma5589]

Does the "shop" compressor go up to 5,000 PSI. ?

[@Jeeper1378]

I have the same pump .. afraid to Go to 5k lol.. my Yong heng blew a burst disc at 4500.

[@simms196]

Very interesting. How long will it hold air?

[@jackscott6551]

years

[@beakfish7319]

yessss! i have a very similar air compressor and i wondered if it would work to fill this since i dont know anything about air guns yet beyond a classic daisy 880 or a crossman break barrel .177cal pellet rifle. lol this pistol you're showing looks amazing! people are complaining about the price but its the BEST, its supposed to be really nice and really expensive. haha pay for what ya get.

[@SustainableCrypto2014]

Can't wait to get my GK1- sadly I bought a evanix viper- do not get that gun as it's flawed

[@-allround-]

Yes, don't buy the viper ! I had to return it to,

[@trinito97]

Whats the decibel on the 25?

[@GeoRedtick]

How would you clean the barrel?

[@JohnSmith-il4wi]

If those air chambers were removable like a paintball co2 bottle then I would buy it. Would be nice to pre-charge like 10 of those and change them out as needed

[@smokenjoe4022]

It would be interesting to match this 25cal against a gun powdered 25cal with the same barrel length which would probably be impossible!

[@Justme99709]

That çan kill

[@jpdm8663]

For $1250, it doesn’t have a removable pellet clip?

[@EnfieldNo4]

Maybe it’s just me but it feels like the safety works in a counterintuitive direction.

[@mariobergnini8897]

does it shoot slugs as well?

[@richardhenry1969]

I was interested until I saw the insane price.

[@Austin080]

Same here lol. You can buy two real bangers and plenty of ammo for that price.

[@W_Desert_Mike]

Great video. All the whiners 😢 complaining about lack of robots😂 I came here to see this gun in particular. Keep up the great content. 👍

[@GoGunCo]

I love the whiners! they boost the video engagement :)

[@ericsmith3765]

The 3 boards are 3/4" thick

[@ArkenAsylum-s6q]

So many weird things that are hard to get used to with airgunning. I almost gagged when I saw you put the allen key in "the crown" of the barrel. It is not the crown bc its an airgun. I shoot a few nice air rifles and there is still some old habits. It would be cool if the suppressor was squared off though.

[@georgeaura]

Can a hand pump be used as well?

[@J0HN_3_16]

You don't want to pump this to 5000 PSI with a hand pump.