AEA Challenger PCP Air Rifle (World's Most Powerful .30 Caliber Bullpup) Full Review +Accuracy Test

[@Chris-uo3rj]

I love your channel. So many airgun reviews don't really display the accuracy of the product. Anybody that says im a terrible shot right before a review ruins it for me. "Great this rifle could be a paper weight or a sniper". Thank you for giving good representation of the guns actual capability

[@garystratton4125]

Video is well done. Good information/ I just ordered one of these .30 cal. with 32 " barrel. I am a little pissed at myself ..I don't have much money and I should not have bought it. I have wanted a .30 caliber for awhile now. I have several in .177 .22 & .25... The .30 that will be here soon, will be my first >30 caliber air gun.My most powerful I have now is the Sumatra .25..and it shoots 50 grain slugs at 956 Feet per second.. a real monster. This AEA Challenger is so much airgun for the money.. Real quality,accuracy and power for a low price... Can't explain it.. I love air guns and I had to have it..

[@AirgunChannel]

Welcome to airgunning! A cycle of buyers remorse and the trhill of shooting. You will like the gun! Just clean the barrel, tune it to 870FPS...get and LDC ...and you will love it. It's going to be loud without a silencer.

[@caspermaul7583]

You sure killed that adjustment screw😱

[@crackerjack9120]

Hi Nate and viewers, I am a middle aged guy with years of shooting and hunting experience. I recently found the air gun world after a friend telling me the fun he has shooting his springer air rifle. I only buy quality rifles, but do not want to waste money from over buying. Mainly I think I will be plinking, but I would like to go yote and varmint hunting. I think a .25 cal with good energy and an inch accuracy out to 50-75 yards will work for me. I want a PCP, but there is the pump pressure to deal with. The AEA Challenger looks promising and looking forward to Varmint review. Thank you.

[@AirgunChannel]

These 12V compressors are the best for PCP. only $300 on Amazon or eBay or Aliexpress. The Air Venturi Avenger is a great first PCP. Amazingly accurate, but only 30 shots in .25. Compressor: www.amazon.com/dp/B08SWDTHXP/ref=redir_mobile_desktop?_encoding=UTF8&aaxitk=576257613bfd52d80dd059fadd9f5138&hsa_cr_id=4328209850101&pd_rd_plhdr=t&pd_rd_r=bd37e196-cc39-4b35-8198-fd4531586f09&pd_rd_w=QG6PE&pd_rd_wg=RXQuR&ref_=sbx_be_s_sparkle_mcd_asin_2_title .25 is a good caliber. but .22 is the cheapest and uses less air. ...both are good though.

[@0113mountainman]

Captivating...I did not want to switch off. Just awesome!

[@AirgunChannel]

Thanks! -Nate

[@G58]

8:45 Surely the power screw is meant to be adjusted with a coin. That screwdriver is mashing up the slot because it’s far too small!!

[@visamedic]

Stick an O ring on your threads. It’ll keep the moderator from creeping up. I’m really wanting the 24”. Great video

[@AirgunChannel]

Hey, thank you. That is a great idea with o-ring. I'll remember that next time. Thanks for watching. -Nate

[@mjeff7415]

That damn pinging sound is just driving me crazy!! If it wasn't for that noise , I'll buy this gun in a heartbeat.

[@skycat777u.k5]

Americans are SO lucky ,I'm restricted to 12 ft lbs here in the u.k.😔God bless 🙏& lovely video 👌well done Squire 👍

[@AirgunChannel]

Thank you! Happy shooting! -Nate

[@nsboost]

Cuz they don’t want you to have more powerful weapons than the state! Be strong.. those regulations are in place to protect the people in power… not you! You should arm you and your family for what’s coming… trust me

[@guitarmandan2125]

nice review good pace for commentary

[@AirgunChannel]

Thanks! -Nate

[@chrisgardner9270]

I have been watching your channel for some time now and I see a lot of good guns 🔫 that you review...but this one I had to have...yep I bought it right after I watched this video....keep up the good work 💪 👏🏼

[@AirgunChannel]

Hey, thanks for letting me know. Terry over there at Fox Air Power will be happy. It was super nice for him to send the gun. He was actually trying to give me the varmint for free for just one video and I said I'll just do two videos and send the Challenger back. I'm so glad I got to see the Challenger cuz I had no idea what it was

[@visamedic]

Want the 24”. Im waiting a bit, want to pay cash for it and the scope, but definitely in my cue. 😁👍

[@garystratton4125]

I also had to get one of these and waiting on it to get here now. I got the 32 inch barrel but I didn't realize it was so powerful even with the 24" barrel.

[@swingonthespiral]

Get yourself the huma regulator! You won't regret it. I'm shooting with a 5fps variance at 165 bar. 54.5 grain slugs @910 fps. 100 ft lbs and 12-15 shots per fill. It's incredible.

[@AmericanDefender]

Awesome vid. I have the 24 inch version dubbed the hot rod Challenger. They are absolutely powerful airguns.

[@AirgunChannel]

Yeah, I had no idea until I got it that they have 3 times the power. Cool that you can adjust it. Thanks for watching! -Nate

[@centralvalleyairgunners2380]

Great video! I really appreciate all your time with the gun. It did good! Great shooting too! Thanks and looking forward to seeing your Varmint vids.

[@AirgunChannel]

Thanks man! -Nate

[@pincaroel5337]

I love this bullpup AEA 32 inches barrel...

[@AirgunChannel]

Yeah, I gotta get the .22.

[@aaabeverages7152]

Got to dig all the special effects. Great review and entertaining. No.1 reviewer.

[@AirgunChannel]

Thanks man! -Nate

[@willytheriot8439]

You’re a badass gunslinger

[@ssquirrel88]

Bravo! This is the way!

[@AEAPrecisionAirgunsInc]

Excellent works Nate. Thanks again.

[@AirgunChannel]

Thank you! I'm glad you saw the review. Now I wish I had been selling these all along! Great gun! -Nate

[@dirtysanchez175]

That pinging is driving me crazy

[@AirgunChannel]

Yeah...needs a de-pinger...whatever that is. Thanks for watching! -Nate

[@heithwatkins]

@@AirgunChannel 🤣🤣🤣

[@Seerwealth]

Great shooting, maybe you need bigger target. like the barn gate?

[@AirgunChannel]

Good one! Thanks for watching! -Nate

[@enolwlfe]

That is badass! This is how a pellet gun should be, some of these expensive break barrels can't hit the broad side of a barn cant stand that s*** I've spend a few grand in the past on break barrels and 👎horrible. I'm getting one if these AEA beasts ASAP.

[@heithwatkins]

What a awesome rifle. With a little tweaking. This will be hard to beat.

[@AirgunChannel]

Yeah, Someone should come out with a reg for it soon. Thanks for watching! -Nate

[@amonsmith3096]

@@AirgunChannel is there a reason you don't shoot at max power?

[@heathhalfhill6401]

Dude…so sorry that your compressor is down. I have went through 3 in the past 2 years. You can get the parts to fix them from ALI EXPRESS for cheap but still it’s just a pain in the butt when they break down. They are easy to fix though. I have 2 repaired for backup just in case one goes down. My I make a suggestion that you get one from Walmart with a 4 year warranty through AllState? One and done for 4 years bud.🤷‍♂️ Hope this helps. Thanks for the videos bud…God bless.

[@briant6669]

I have 2 broken that need a rebuild.

[@vincentdavi3514]

I got the same compressor, you HAVE to release the air, THEN use it again. (In a case you filled I then wanted to pure air in

[@AirgunChannel]

Oh, Darn. I returned it already. Got a Tuxing now I only run for 20 minutes.

[@catherineharris4746]

Simply outstanding!👍👍👍

[@AirgunChannel]

Thank you! BB-8 loved this gun too! Thanks for watching! -Nate

[@HerbertCortes]

Its to bad there isn't a hammer adjustment spring. That would make this rifle a great buy and as good as those high end 2k rifles.

[@AirgunChannel]

There may be under the stock. Ask the dealer via email

[@Nazareth434]

I've got a gsx 3 compressor or something like that- works great, but had a loose wire which I found and tightened, (it kept kicking off as soon as I hit the co press or switch), now it works great so far. It is oil and waterless, and portable, can run off of car battery. Don't know how long it will last, but no sign of slowing down yet. I think the cost was around $400 if I remember er right. Does t hardly get hot at all, but I do leave it ru Ning after a FIL, for a few minutes to cool it further before shutting down, maybe around d 7-8 minutes or so cool down time. It's like like the tuxting portable compressor, same deal with a converter box for home use. So far so good. What is name of,that rest you use?

[@markmtbrider]

The struggle with hpa compressors is real.

[@AirgunChannel]

3 years in PCP = 8 compressors dead (one cost $1300)...so I have spent $100 a month since I started. Going to the Scuba shop would have been cheaper. ...my fault about half the time... I would blow them up. Thanks for watching! -Nate

[@philiprogers4071]

Take a honey dew melon, freeze it for 48 hours. Take a half inch piece of ply wood appropriately 12inch square. Stand the frozen melon behind the ply and mark on the ply where the centre of the melon is, now one shot. This method simulates a human head, the ply is the skull and the melon is the brain. One shot, examine, then enjoy and blow it to bit's..

[@PatchWorm_bore_cleaners]

Beautiful rifle, great review 👍👍

[@AirgunChannel]

Thank you! I was suprised it had so much power. I was not expecting that. That's the kind of gun I would like to have sitting around. Thanks for watching! -Nate

[@garystratton4125]

I hope my gun is as accurate as this one.. I bought a Yong Heng compressor in 2016.. December.. Still got it...Still works good.I paid $303. for it back in 2016...I don't let it run more than 15 minutes at a time before cooling...and I don't go over 4000 PSI...Change oil when it darkens ...

[@AirgunChannel]

You run the Yong Heng right. I just learned to only run them for 20 minutes...after blowing up many of them...that is key. I only run my Tuxing now ($300) for 20 mins max, but I do go to 5000 PSI. So far so good. ...Time for an oil change!

[@V3g3t41987]

@@AirgunChannel ive had the yong since 2019. ive never let it run more than 15 minutes at a time and ive also never allowed the temp to go above 65f

[@thirunahariprabhakar6560]

Extremely 2good Exlant explanation Sir

[@AirgunChannel]

Thank you! -Nate

[@kingfishphill4120]

Real nice AEA 30CAL great review and presentation NATE , awesome footage 🎯

[@AirgunChannel]

Thanks man. Those .30 cals never dissapoint! Thanks for watching! Your one of my top viewers! I appreciate it! -Nate

[@kingfishphill4120]

@@AirgunChannel You got my support Nate , the best videos and reviews I say , the footage is the best ( 👌)

[@stefenney3126]

@11:02 was that your pet dog wondering behind the target area - seems to have had a lucky escape !

[@got2go4word]

Another great video!

[@mattedwards4533]

You are messing up the lock screw by using the wrong size screw driver?

[@AirgunChannel]

Yeah, I got the right size now. Thanks for watching! -Nate

[@gmsantafeairgunner2169]

The little screw with the handle is actually it screws onto the safety

[@AirgunChannel]

I finally figured that out. Thank you! -Nate

[@jeffreystroman2811]

I wanted you to review the AEA stuff for a while, until you did cause now everyone is gonna want one except the haters of course.

[@AirgunChannel]

Yeah, I think a 70 foot pound .22 would be real handy! I appreciate the comment. Thanks for watching! -Nate

[@ourranchairgunfunchannel]

Srry Nate, just now seeing this. Damnit, can't wait to have the hp ss pistol. Great vid Buddy.

[@AirgunChannel]

Cool. I'll try and review that one. Thanks for watching! -Nate

[@lauraradigan4114]

I’m a left handed shooter. Is the bull pup stock ambidextrous? Can it be fitted with a silencer?

[@AirgunChannel]

There is a silencer on it in the video silly! Ambidextrous.

[@dtroutmann]

What moderator do you have on this gun I own the Challenger 357 and I'm having a hard time finding a moderator for it

[@AirgunChannel]

Donny FL Sumo

[@dtroutmann]

@AirgunChannel I see three different adapters on Donnie FL website for the AEA Challenger as well as the moderator that you suggested but I'm not sure which of those three adapters is necessary? Or if an adapter is even necessary at all if I get the Sumo?

[@kansasairhunters2057]

What kind of shot count with the 850 fps tune ? Thanks for the video.

[@AirgunChannel]

Hey, I wish I would have tested that. I was too cheap to waste the pellets. As I recall I was getting at least 40 shots per fill...but you may get more, I really don't know. Only shot it for a few minutes. -Nate

[@bushwhookie1334]

the power wheel does nothing for the gun if you cant do anything with the hammer spring. the hammer is set so on low power you are still using the same amount of air as on high you dont get more shots

[@kansasairhunters2057]

Yep. You are right. I hope AEA could see these comments . Can you adjust the hammer spring at all?

[@bushwhookie1334]

@@kansasairhunters2057 don’t think you can but I think you can ask for a lighter hammer spring but then again you are stuck.. they should have a hammer spring adjustment instead of wheel

[@kansasairhunters2057]

I really think the Chinese may need to stop dabbling in other 1st world countries...they are not allowed to own airguns BY LAW. Kinda makes you question everything from China..including labor laws..or lack there of.

[@stedyone1090]

Very nice 👌 👍 More power Scotty. I mean Terry. Lolol

[@AirgunChannel]

I gotta try a .22! Thanks for watching! -Nate

[@dojifly]

Love to have an FX, but this looks like an awesome gun and in my price range. Think I will head over to Fox Airpower and check it out. Thanks.

[@AirgunChannel]

Yeah. Cool gun for sure. A used Dreamline Tactical FX will run you about $800...then buy a Maverick or Crown...then an Impact. Took me about 4 years to make it to the Impact.

[@donxiong1775]

The biggest question is how hard is it to cock the action and load the gun?Reason being is my Mom wants one but I’m worried she won’t be able to

[@dougiefresh3767]

I have the .30 Cal standard 24" barrel and it is 1 accurate gun. It shoots everything besides light weight NSA's. Mine likes the 61 grain NSAs but I can shoot any pellet. I was tryna see what (bipod) you have on that der tank? I need 1 of those.

[@AirgunChannel]

It the Talon Tunes bipod. It should be at Talon Tunes.

[@danielcharles6804]

Do you know if they sale the 32 barrel.. cause i have the 24 version.. because everything else is the same right the tunne and the power is there its needs the barrel right?

[@AirgunChannel]

Call Terry at Fox Air Power...he will know.

[@aboutthemetal8783]

Is the bullpup basically a snowpeak ,that's had some real tuning work done?.

[@macabespeed]

Can make over 200fpe w the right ammo! 84 gr griffins are sweet.

[@AirgunChannel]

Macabespeed: This is your kind of gun! You may have one. I have to check back in with your channel...I'm a long time viewer! Thanks for the tip on the griffins! -Nate

[@gmanneod8085]

@macabespeed Hay Nate and B, it would be cool to see you two do some collaboration. How close do you two live?

[@gmanneod8085]

@@AirgunChannel Hay Nate and B, it would be cool to see you two do some collaboration. How close do you two live?

[@mackattack8627]

Best Affordable PCP Platforms In The Last 3 Year's They Mostly Hunting Platforms With LW Barrels Tho Always Quality Aluminum Like FX Impacts Bro

[@AirgunChannel]

Didn't know about the LW's Thanks! -Nate

[@richoperezinho7215]

Hi, please, what size is the supresor ,. the 32" barrel thread since the two 1/2 UNFX20 suppressors did not fit

[@gino2033]

Why is it that after i paid for products from fox air power they will not speak to me?

[@jasongallego7993]

I got the Benjamin hand pump and went 4 yrs. before it busted an oring, fixed it for 70 cents and now at the 3 mth. mark I bet its another 70 cents cause I didn't change out the other oring that are kissing each other. But cool vid. AEA has a odd fill probe I lucked out getting my Hatsan Invader in .25 with an Air Venturi fill probe adapter a compressor and tank just gonna have to stay on my wishlist along with an AEA. -951-

[@richoperezinho7215]

What size is the barrel thread for the suppressor?

[@AirgunChannel]

1/2 UNF

[@nigelbase1196]

So you use the wrong size screwdriver and chew the slot up on the adjuster 🤔

[@AirgunChannel]

Not my gun silly! Just kidding -Nate

[@KevinLopez-nn8sx]

Excuse me, I have a question, how many shots can you do per fill?

[@angelisone]

This .30 cal CAN NOT do semi-auto? Nevertheless if dead on @ 35 yards, then how much drop at 100 yards & chronograph @ 100 yds what is fps?

[@AirgunChannel]

Good question. I would guess 2-3 inch groups at 100 yards. Not sure the FPS.

[@flashgordon99999]

Buy a Hill EC3000. Pay once, cry once. They are fantastic.

[@AirgunChannel]

...shopping... Thanks for watching! -Nate

[@SimplyRed66]

It looks AIR HUNGRY😋

[@AirgunChannel]

I would imagine about 30 shots per fill. Didn't test it.

[@Steve-wz5pz]

Proving that visible screws can be irretreivably buggered almost instantly.

[@terrywells3955]

AEA sweet PCP

[@AirgunChannel]

Yeah,I would like to try that gun in the regulare stock in .22.

[@richardolson4611]

@ 8:46 WTF you do to that screw

[@markc3571]

Aea or wildcat, which would you prefer?

[@AirgunChannel]

Wildcat will be better...no doubt

[@markc3571]

@@AirgunChannel One more for you, airmaks caiman x or wildcat compact?

[@jdp5704]

Same thing happened to my compressor. I hope you got a refund. No probs with Omega Trail Charger ever since.

[@mackattack8627]

Good Lord You Popped A .30 Polymag At 1200 FPS I Definitely Wouldn't Want To Get Hit By That Anywhere Than Gun Barking 😬🔫✌️

[@renshieldonpadilla4190]

Is there a version of this with iron sights?

[@AirgunChannel]

not that I know of. You could clamp some on.

[@kalethadhyansinghuttrakhan8676]

Nice

[@larryschueneman4418]

The video clip of you cutting the target to pieces is the same clip you used is the same one you used in your review of Another air rifle. What’s up with that?

[@larryschueneman4418]

The Huban K1 2020

[@bushwhookie1334]

the power wheel does nothing for the gun if you cant do anything with the hammer spring. the hammer is set so on low power you are still using the same amount of air as on high you dont get more shots

[@AirgunChannel]

Good point! -Nate

[@danielmcaleese44]

that screw driver is gn destroy that locking screw .

[@k2robins1]

🥺 Was that a bicyclist riding behind your targets as you fired @ 11:02 in the video? 👀

[@zzzremedy3831]

Lol that was his dog I’m pretty sure. Look at the right of the screen

[@shermdog6969]

Is it hand pump friendly?

[@derrickmitchell39dm]

this is crazy

[@AirgunChannel]

Word, especialy in .30 cl. I would like a .22 though..wiht 3X the power! Thanks for watching! -Nate

[@nicholasbroadhurst9096]

Can this reliably kill coyotes humanely? Also, will it draw any attention shooting it suppressed in an neighborhood where the suburbs meet rural?

[@trondyne3513]

What is the actual weight of this gun? I hear it's much heavier than stated....

[@garystratton4125]

PLEASE get a screwdriver that fits the adjustment screw slot.. Looks like it is getting dinged up.

[@domingoliao2724]

Is there available regulator for this this powerful pcps in the market today?

[@dougiefresh3767]

I don't think there is at the moment

[@AirgunChannel]

They should be coming soon. Also on Airgun Nation Forum, they will know. Thanks for watching! -Nate

[@max333463]

Nice video! Upgrade to a real compressor. Omega Air Chargers keep going and going and going. 100 plus machine hours and still going strong.

[@AirgunChannel]

Yeah..they are ALWAYS out of stock. I spent $1400 on a Benjamin but whenI tried to change the filter I broke it....Lame! Daystate is givng me their $2K comp for 1/2 off whenever they get to the USA...been over a year since they told me.

[@briant6669]

@@AirgunChannel The filter on my Hatsan broke and I replaced it with the one from my broken yong heng. It fit right on even though they look different. I don't know if that will work on your Benjamin though.

[@stoecklinr]

Curious What you meant by you can't shoot pellets that fast?

[@stoecklinr]

That was at the 6:58 mark, And now that I think about it I've noticed that you alway Turn the power down to 890 FPS , So I am assuming that there is a law where you are filming this is that why? And thanks for all the reviews, love them! Rich

[@AirgunChannel]

Rich, It's because of accuracy. Each pellet has a speed it is most accurate...usually 870-890 FPS. ...850-870 for .30 cal

[@akseminole]

Mccabespeed got over 200ft lbs with an 85gr slug

[@AirgunChannel]

Oh my gosh. In his backyard? Just kidding. Cool stuff. I had no idea it had power when I picked it out. I just thought it looked cool. Great one of a kind powerhouse! Thanks for watching! -Nate

[@tomcampanale8176]

Hell Ya, good review Nate…. Love em all GREAT SLOW MO TOM LI NY

[@AirgunChannel]

Thanks! That .30 cal gets the job done! Some day I'll do some real slow mo with my other camera and the good ol'e .30 killiber. Thanks for watching! -Nate

[@Angelum_Band]

No slugs?

[@AirgunChannel]

I only had a few minutes with the gun. I have a life you know! ...just kidding. ...but I didn't get paid for the video so: No extra stuff yo! Thanks for watching! -Nate

[@meaghancote-mcauley79]

Cool

[@AirgunChannel]

I think your cool. -Nate

[@meaghancote-mcauley79]

@@AirgunChannel I'm actually buying this the BP AEA Challenger .30 cal tomorrow with the 32 in barrel.. Any recommendations on other accessories or anything I should know about this gun..? I heard one thing I didn't like an that's the blow off valve almost able to take your face off . Honestly think gun is cool.. kinda just left it that way because comments and thumbs up help the video and the gentlemen I'm buy gun from at this time was calling.. He's somewhat local in the sense its about a 2 hour drive.. His name is (sig shooter) I was looking to buy this rifle and called his store buy luck had no idea I'd be within a reasonable driving distance , good for me though because now I don't have to wait weeks to get it..

[@ابوصفاء-ل5ب]

كيف الحال.احسنت الشرح .بندقيه جميله .وذات مواصفات .جيده .ماهو السعر $في بلدك .

[@abdulmananvlogs9914]

Good

[@AirgunChannel]

Thank you for watching, and for the comment. Happy shooting! -Nate

[@rickymeredith-cd2pj]

Hearing protection a must huh what huh

[@KoKo-wd2ub]

good

[@AirgunChannel]

I agree...cool gun to have.

[@nelsonentia714]

How can i buy?

[@AirgunChannel]

Link in description

[@lalthakimakimtea354]

What praise

[@AirgunChannel]

$459-$529 USD link in description

[@lalthakimakimtea354]

@@AirgunChannel thanks

[@keesdane9687]

Can you buy this in Europe?

[@AirgunChannel]

YES for sure. Try Krale Airguns.

[@keesdane9687]

The not sell this gun

[@minigpracing3068]

That thing need a depinger! Sounds as loud as a Bulldog.

[@AirgunChannel]

It's got the ping all right...you can tell on the slow motion shots...slow motion piiiiiiiiinnnnnnngggggg. Thanks for watching! -Nate

[@heithwatkins]

That's one hard hitting 🔨

[@RandyParks-rn8wq]

I want this

[@dongonggo4978]

how much this gun...

[@AirgunChannel]

I just kept them in the package. They come out OK.

[@josephsaucedo8691]

That pump looks like a young hang there not built to build that much pressure it's only built for 4300 and if you're trying to fill that tank it's to big in less you do a couple of cool cycles make sure the shirt water pump That it comes with is working because there the real killers. the best thing to look into buying is a booster pump and tank setup. this way you only need to fill when completely empty it way more reliable trying to get that high of pressure in a bigger tank with low pressure. Hop this helps 👍👌✌️🎯💯🥂

[@AirgunChannel]

Thanks for the info! I tried to top my SCBA tank to 4500 the first day...the water was cool so I let it run for 40 minutes. I should have given it a break. It was a Yong Heng clone, cheapest on Amazon.

[@josephsaucedo8691]

@@AirgunChannel ya the run time needs to be half the time and cool down should be about the same amount of time. For 300$ you could buy a real young hang with some shopping around. They say Walmart sells them and you Can get there warranty. It's a good deal.

[@edgartan4532]

❤❤❤❤❤❤

[@AirgunChannel]

This PCP loves you too!

[@JIBREAL1967]

Great video!!! Black friday..here I come (only time the Mrs wont scream about me spending $..because she is spending..oh the Hypocrisy 🤣🤣🤣🤣)

[@AirgunChannel]

Smart thinking. Pay attenton guys!!!! Merry X-Mas -Nate

[@quimicaapuntaelapiz7202]

Haces envio a Colombia?

[@hunterph8567]

How much in Philippines mony

[@AirgunChannel]

$549 usd

[@vasilebartas8035]

Do You need a license for this gun?

[@davida6889]

Dude aren’t you the guy who runs fox AirPower.??? Lol

[@AirgunChannel]

No. I don't make any money on guns