AK-47: Rear Sight Removal & Installation (HD)

[@rods1379]

11 years later and a huge help. Thank you (if you see this)!

[@kalebericson5077]

Still helping people in 2023, awesome thanks!

[@hansgruber9685]

Finally a good video on how to do this. Everyone else either shows you on a worn out spring that requires almost no effort or they show some overly complicated bs using a drill press or something. Thank you.

[@Kirbythediver]

"the geniuses at century" I lolled

[@zekoomrkva]

This video has helped so many people over the years, thanks again in 2022! Took it out in a second but man... putting it back is a different story. "It may take you a couple of tries" - haha took me freakin 45 minutes.

[@badjoke1111]

Thank you Sir! That was a super concise and well explained operation. Great video, again thanks for sharing.

[@nsz85]

Pry Vacy You're welcome!

[@analogludite9575]

Still useful information in 2024!! Thanks! After much frustration, I thought I was going to have to go to a gunsmith. I was told "just pop it off". Thank you for showing and explaining HOW to "just pop it off".😊 Also how to "just snap it back in".😵‍💫

[@theoriginaldatahut]

Best video on you tube for this. Looked at others especially for putting on Texas Weapons system 'dog leg' rail. Screwed around for 30 min. with the others and this nailed it in 10 sec. with no 'special' tools like a custom dremelled dowl rod. This is what makes the internet and especially KZbin such a revolution since I was a kid.

[@ClawSpike]

Dang, I had tried to remove my rear sight before and gave up. I thought it was impossible. Thanks for showing this in close up and great lighting! I could see everything.

[@Tomintx81]

Dude, the screwdriver trick was genius. I usually just rip my fingers up pushing it out, didn’t feel like doing that again today…. Found this video and it worked ridiculously easy. Thanks man!

[@nsz85]

You are very welcome! I am very happy I could help you out. I always try hard to cover everything really well with quality angles and lighting. I work hard and I appreciate comments like this. That's why I do it! Thanks!!

[@nsz85]

You are very welcome! I am glad I could help, comrade

[@scottwilson1258]

Thank You Sir, I for One just vacated my AK47 Romy's Sight with your Help and Confidence inspiring video!

[@eirizarry2568]

Best demonstration of Rear Sight Removal……thanks.

[@williamscott3444]

You are the Bob Vila Of AK maintenance! Really helpful! Thanks much 👍

[@nsz85]

I am very happy that I was able to help. Thank you for watching :)

[@zaimdz573]

You are the only one who explains that, thank you

[@dochollidaythefirst]

You have no idea how helpful this video is. It took me one hour to figure out what I was doing then I watched your video. 30 seconds I had it replaced. Very very informative video. Thank you.

[@pedrobeltran7504]

Thank you sir this was by far the easiest way to do it

[@LaCoalicion.]

Honestly i did not expected this to work. My AKM-47 airsoft replica fell on the ground and the sigths ended up flying through the room. Thanks to this video I manage to put them back in.

[@bareknucklehogdogs]

Dont need life advice but helluva straightforward video, bro... Superb. .

[@curtishaack4342]

Another quality product from CAI.

[@Larnsdoon]

Excellent tip! This is by far the BEST video to explain the removal process. Thank you!

[@nsz85]

Thanks! I am glad you found it helpful and were able to fix yours :)

[@XTrooper3936]

Fantastic! Just what I needed to know! Thank you very much!

[@future_phonk]

This was the fastest easiest video I've seen to remove the front sight. I wish I saw this when I was installing my Aterro Arms mount 😅

[@nsz85]

You are welcome! I am glad I could help!

[@nsz85]

Haha thank you. I appreciate that. Ebomey is a great guy and a great friend.

[@nsz85]

Yeah, it can be hard to get that spring pushed down. I am glad my video was helpful! Thank you!

[@dasruskov4]

Thank you so much for showing us this, this is such a huge help

[@nsz85]

Thank you! Ebomey and I had a great time together. Expect to see some more intros with him in the near future :)

[@MrGenaGer]

Thanks for the short video with good explanation.

[@DrAK-bv8dc]

Yeah that was actually awesome, I didn't have to sit through sponsors and a half hour explaining why you needed to change the sights. It's been a while since I've had to mess with them and the whole process took about 2 1/2 minutes including watching the video lol appreciate the help. Also I was gonna say I can't believe that got through century QC but then again, I absolutely can 😂

[@nsz85]

Ha, you are very welcome! I am glad i could help

[@johnny8211]

This video helped me tonight, thank you sir.

[@muhammadwaqaszahoor9602]

sir today this video helps me...I am thankful to you

[@blowupuate13]

You seriously deserve more views! Your videos are GREAT!!!

[@nsz85]

I am glad it helped!

[@whiskey-4208]

Thanks man, this really helped with my current AK build

[@Reivo]

Thank you, for such a simple video.

[@lukehernstedt3026]

THANK YOU! Just swapped out the broken sights on my AK. Very helpful video!

[@mrdukerulezz2327]

I thank you dearly for this handy trick.

[@Ajkirchoff]

How is you read my mind every time I need to do something on my ak you put the vid up that day

[@shaymanking]

That was way better than how Texas Weapons Systems was showing to do it. Thank you!

[@M81_WOODLAND]

Yo! I just used your method, and my rear sight yeeted itself ACROSS the garage and impacted the wall, lol 😂😂 But hey, it worked! Thanks for the vid!

[@nsz85]

You are very welcome! I am very happy you found it helpful. That is why I make these videos, is to help people :)

[@yung_grim1559]

I've just bought my used vska draco pistol and noticed my rear sight is crooked to the left.. could I just take it out then put back in to hopefully line it up?? Or is there adjustments I'm just not seeing?

[@jerome8469]

Thank You: It was Great that your Video Popped Up First when i Typed in "Remove Ak Front Sight", Because I've been in the garage for 20 mins Pressing Down on the Front of the Spring and Swearing a LOT !!! Thanks Again !!!!!!!!!!!!!!!!! (Tiny Out)

[@nsz85]

You're welcome. I am glad you found it helpful :)

[@nsz85]

True facts are true, comrade.

[@JDTran]

Thank you for an excellent demonstration video.....!!

[@thomasmorris3780]

Man getting that back in was tricky. Thanks for the helpful video my man.

[@everybodydothatdinosaur519]

This helped me so much, it was hard making me think what to do with the Yugo sight, but this showed me that you DO just have to beat it, since it's really that tough, and you won't break it. Good idea with the rag! Helped me a ton. :D

[@nsz85]

John Smith I am glad I could help :)

[@KINGRODP]

I just changed mine! Thank you for this vid! Saved me a trip to the gunsmith.

[@Dauphinthegreat]

Thanks For the info, I'm adding a top rail over the dust cover which clips into the leaf spring part of the back sight. Couldn't have done it without you.

[@nsz85]

Happy to help!

[@nsz85]

Nice! I am glad you found it helpful :)

[@chriswrecke7352]

Omg! Thank you so much. I understood how it came off I just didn’t know a good way to do it. Popped right off for me! Life saver!

[@n.speezly1467]

I have to say, you consistently have the best no bullshit install videos! Keep it up my friend!

[@sempernarc]

Thank you!! Started sweating once I couldn't get mine on. Awesome quality video

[@R.Tafolla]

So helpful. You’re the goat.

[@jonathannorzagaray4547]

My Mauser Kar98k rear sight was not coming off since the pin was fixed to the rear sights. Almost all Kar98k rear sights are removed by tapping out the the pin. I tried your method on the Mauser and it slid off perfectly without damaging the gun. Although it is for a different rifle, thank you for helping me with the Mauser rear sight removal :-)

[@GRIZZ357]

F/A brother thank you for making life a lot more simple, I was ready to toss the F^%king sights thanks again

[@juanrestrepo9202]

nice job.. I was fighting with my rear sight until your video. thanks man

[@TheBigOne0305]

Thank you very much! I just picked up my first AK yesterday (Cugir WS1-63) and the previous owner had replaced the rear sight with a mount for a red dot. I'm planning to go with the side rail for that, so I wanted to swap it back to the irons first and get some trigger time with the stock gun before moving on to optics (if you can even call it stock, it already came with the Magpul Zhukov furniture, an ALG trigger and the Krebs style safety, all the mods I had been planning to put on my AK anyway, score XD). I struggled a bit with this (although I have done the same on a K98 a while ago and it appears the two sights are quite similar) and your video helped out a lot. Thanks again! Greetings from Germany :)

[@TheBigOne0305]

Funny enough, I ended up on this video again. This time in order to remove a rear sight from my second AK (Saiga M5 in 5.45x39) in order to put on a TWS top cover mount instead. Once again thank you very much for this very helpful video! :)

[@talonlee5049]

Thanks this helped me a lot putting on my KNS rear sight.

[@onmilo]

Your tap and rap method is much easier than the old push and twist method I was taught. I agree with using a catch cloth or box and anyone who has spent 20 merry minutes looking for a part that has shot across the room will understand why.

[@jlgrferromodelismo]

After half an hour sweating trying it by myself, I feel stupid how easy it was xd really helpfull video

[@rogermcgee1]

Best AK rear sight removal video ever made! Plus....you've got ebomey's endorsement, i knew it had to be good.

[@nsz85]

That would be an understatement.

[@trevorphillips2250]

It actually helped my CM 28 airsoft version 😂 thx man

[@itchyisvegeta]

Worked better than any other tutorial video on youtube. Thank you, nsz85!

[@SolutreanSpear]

Thanks for the videos they are a ton of help

[@nsz85]

+Jim Toots You are welcome!

[@jerrydalley3756]

Having trouble re-assembling the upper hand guard. During disassembly the lock lever wouldn’t budge and I had to force it up to remove the upper hand guard. Now it seems to be hitting the rear of the gas tube during re-assembly and will not close properly. Any suggestions that I might try before taking it to a gunsmith?

[@echoauxgen]

Thank You SOOO!! Much!! Now with trifocals need to put on glow halo sights front and rear, no need for red dot or scope iron work great deer/pig hunting in the thick woods.

[@socc6991]

Thank You for making this video.

[@BOEHHO89]

Good camera work and good lighting .

[@nsz85]

Eugene Onegin Thanks!

[@newshounded]

Thank you, thank you, thank you, for showing this EASY way to take off the rear sight. Too many times helpful people like you don't get the recognition they deserve for taking the time to help out us AK-philes. By the way: did I say thank you! ;-)

[@maxwelldavis8697]

you sir, just earned yourself another subscriber!

[@1992pattrow]

Great video! Quick and to the point!

[@rvasquez8057]

Worked like a charm!!! Thanks....

[@Earth_Care_Cowboy]

Thanks for the video, I had it all wrong. Good to go now!

[@adamsowers8957]

C.I.A. never ceases to amaze me. Do they have any QC? AT ALL!

[@matt8530]

great video! made swapping my rear site easy.

[@nsz85]

Thank you, I think so too! :)

[@TheShermandale]

lol. Intro was a killer. Good info as well, bro.

[@natefromearth2217]

Quick and concise as always! Prost!

[@mattv2099]

useful

[@jacobgh81]

Very helpful video! Thanks for posting it! Just put Meprolight night sights on my WASR.

[@kaboomer4297]

Thanks nsz85, great easy-to-follow instructional video, good lighting and well focused. Funny intro, got quite a chuckle... (is that movie actor Dana Andrews' grandson? spittin' image)

[@madatlas3806]

I was gonna say you're full of crap when you said "just hit it", but I tried it and it works. Greatly appreciate the video!

[@nsz85]

That appears to be an RPK style rear sight that can be adjustable for windage. Pull it out, turn it, put it back in.

[@9527WahOn]

I removed it, but now can't put it back. Lol, every time I push down on the spring, it just go all the way through. Any suggestions?

[@Gonzolock]

Bless you sir... worked just like you said... appreciate your help.

[@gtracer6629]

Thanks for the video. I considering installing a red dot sight. was wondering how hard removal would be.

[@feuerfrei7070]

Thanks for the advice. Also worked on my Toz 17-01 22lr rifle!

[@Snake_Boi]

Perfect, just what I needed and fast delivery.

[@LRock-um8xo]

Great video my rear sight on my yugo m70 AB2 is crooked. It's not aligned and seems pushed to the right.

[@cnagl4994]

Lifesaver! Thanks for posting!

[@mboyk7768]

It's been 9 years since he made this video and Century still effing up

[@mcintosh1346]

Apex-gun parts is an A+ company

[@kpags5670]

Great vid. Upgraded my sights to a GG&G ghost ring.