Ak restoration - gun restoration - soviet gun

This gun restoration video, I restore an ak M. I bought this gun in an arsenal in the czech republic, I already intended to restore the gun, the restoration process was not easy, because akm has pins inserted at 12 tons, this means that a large hydraulic press is needed for the restoration of this gun. However, I managed to complete the restoration and make this Soviet beauty work perfectly.
This gun is built in Izhmash in 1971, normally he required maintenece, but this need really a restoration because he stay a lot of time in humid place. and was used for take every pieces. but at the end the restoration was end with a great result.
YOU CAN BUY ME A COFFEE HERE : www.buymeacoffee.com/RestauraTo ❤
THE MY FAMOUS RUST REMOVER: amzn.to/30qFpOM
Skrewdriver for guns: amzn.to/3wWyCGW
The famous bluing kit: amzn.to/3g78ZfT
Punch set for pins : amzn.to/3xO3PwL
My camera: amzn.to/34M06mE
My instagram page: bit.ly/2OStShK
Music by SilverSoundstudio's (soviet merch)

[@restaurato6629]

My famous rust remover: lamtechstore.com you can buy me a coffe here : www.buymeacoffee.com/RestauraTo ❤

[@hardmanners]

I like the folding stock. This exact version was my service rifle for 3 years in the east german air force during the 80s. Excellent weapon

[@GeurigeHuskey]

Hello veteran

[@DJJAW11]

... Are not some of the east german Ak variants,mpikm etc, some of the most sought-after Aks!. I love those stocked versions, with the dimple stocks etc!. But I live in the UK 🇬🇧 lol.

[@West_Coast_Gang]

Hello, I have a huge interest in the East German military

[@ethanspaziani1070]

Cool

[@mrban1419]

Why not the hk53? That’s kinda odd

[@eli_sasizch]

Да можно было не восстанавливать, он и так в прекрасном рабочем состоянии был, очевидно же

[@krytoi_pocanchik]

Без приклада стрелять не удобно, а так впринципи согласен

[@Ariusliv_45]

Ну только ржавчину для красоты снять

[@_propan_]

Ак и так бы стрелял, а приклад тут не стандартный

[@Myname-tp1do]

@@krytoi_pocanchik аксу шмаляет без приклада и ничо)

[@Myname-tp1do]

@@_propan_ это последняя разработка Концерна Калашников - невидимый приклад. АК-суслик

[@pashaak7453]

👍Просто от Души. Легенда на все времена.

[@bob7AZS]

I've used a lot of guns during my military service but to be honest the AK-47 (we used to call it PM 7,62 or our girlfriend) it was the best. I remember every soldier writing his girlfriend's name on the wooden part of the gun(that was so stupid, now when l think about it). I saw Maria, Elena, Ana, Cristina, etc...all kind of names on every gun. I was alone in guard in the woods, at 25*C bellow 🥶, some wolfs hauling somewhere near, but carrying a loaded gun gave me a sensation of security and l was not scared it all. Not a gun fan but this makes me remember that time, my mates...it was so hard but so nice at the same time! Thanks for the video!

[@JustAPersonWhoComments]

No annoying music, no talking, plenty of info, beautiful shots, masterful work.

[@monarchistheadcrab8819]

+ pickle

[@tanvirrahman7869]

nice

[@Yasutaka]

I agree, but that makes the choice to slap an annoying "commentlikesubscribe" message, complete with sound effects, at 2:10 more disappointing than it normally would be.

[@pauljd2664]

And ASMR

[@catonke2232]

Да

[@DamnZodiak]

I have to admit I'm not a fan of the plastic furniture and the wire stock, but that's a damn good restauration job! Very satisfying to watch.

[@MartasZLA]

True I love wood too!

[@NvrchFotia]

I agree, wood would look nicer.

[@shafismaili1347]

It's meant to be blued too. Plastic fittings. Everything done wrong.

[@SkorpzOfficial]

Personally I prefer the polymer stock AKs such as the AK-74M and the AK-104/5

[@dylanwight5764]

I agree with the stock being a poor choice but I quite like the 100 series furniture.

[@allanlindsay8369]

One of Life's great joys is to watch an artist at work. Thank you.

[@voldemarvolf621]

Браво маэстро! Дал шедевру новую жизнь. А складной приклад такого типа, просто огонь 🔥🔥🔥

[@gorjearies410]

Ak m 74 🌹🌹🌹🌹

[@user-ln6jm8ir3d]

ГДРовский приклад

[@user-xw4ks1cf6l]

Мне больше нравился складной в АКС-74. Рамочный.

[@user-jp6lf2ie7z]

Это где же такие "хозяева" живут...что так оружие не любят и доводят до такого состояния...За вторую жизнь АК жирный лайк😊👍

[@garretmurdok5855]

Ох братан... Россия большая страна, дураков хватает.. В Беларусии тоже.

[@user-zx1wu5yh4l]

Это контент! Он заранее и намеренно его состарил!

[@user-qt3mm2yy2h]

everywhere. sale of weapons by weight

[@user-lw4zw8mu4p]

@@garretmurdok5855 Автомат чешский

[@user-hp5kp5vi4b]

У Самалийских пиратов через одного такой аппарат!

[@snakevenom8066]

What an absolute beauty. A relic given another chance and made into a masterpiece. Amazing job.

[@hoangdungnguyenvu6441]

Jejuudjeujehfhhejfujruiwudjuwujdurjirjhf🤢🤢🤢🤢🤢🤢🤬🤬🤬🤬🤬🤬😡😡😡😡😡🤮🤮🤮🤮🤮🤮🤮🤮👹👹👹👹👿👿👿👿👿😈😈👻👻☠☠☠

[@vegafadge3174]

It’s really not a relic, it’s an AKM which is still standard issue for Russian infantry EDIT: I mixed its application up with the AK-74, but the AKM is still the second most produced gun in the world

[@snakevenom8066]

@@vegafadge3174 Ik by relic I meant the condition it was in prior

[@vegafadge3174]

@@snakevenom8066 fair

[@barrytheberettam9390]

@@hoangdungnguyenvu6441 are you having a seizure whilst throwing up whilst scared by something whilst eating whilst pooping?

[@PepWan]

Amazing work. Thanks for sharing. I like the wood better but to each his own.

[@tarhunta2111]

I truly love watching this meticulous process.

[@wow2]

Огуречный рассол - это бомба :) Хорошая работа! Штифты вставленный под прессом, снимал разогрев и резко охладив предмет - вылетали на ура без использования пресса. Лайк тут однозначно!

[@itsyourmemelord2378]

Fr bruh

[@mspoints4fre123]

I don't know what you said, but I think I agree.

[@user-kb8mg2xn5v]

He is say: It's cool work.

[@aleksandryaremchuk8187]

Это не домашний рассол..он безполезен...это рассол от маринованых огурцов! А в нем уксус...( Думаю чел просто для прикола это снял..а очищал в спецжиже)

[@wow2]

@@aleksandryaremchuk8187 Скорее всего да, я в уксусе чищу без всяких дорогущих спец средств, что играет роль при большом объеме очищаемых предметов

[@chebypattern]

The moment he was assembling the AK back with a timer, really brings me back to school

[@royjaber571]

Are you Russian?

[@IlNamelessKinglI]

@@royjaber571 Nop, american

[@royjaber571]

@@IlNamelessKinglI he would assemble an AR-15 there

[@Zeph_]

@@royjaber571 that is joke . it's because of school shootings. not gun assembly competition

[@royjaber571]

@@Zeph_ oh okay lol 😂

[@arianlaser]

Restauro fatto da vero professionista, il pezzo è molto ben conservato, segno che gli acciaii dell’est sono di ottima qualità. Peccato per i pezzi sostituiti: preferisco di gran lunga il legno e anche il calcio pieghevole di vecchia fattura. Grazie e complimenti.

[@diegomarquesalves1]

Como vídeo de restauração ficou linda, mas gostaria que você tivesse restaurado também a parte amadeirada no cano. Parabéns pelo conteúdo.

[@user-dc9ri1lv1h]

Очевидно не знаешь цевьё на почти всех калашах,называй эту часть ЦЕВЬЁ!

[@hello9349]

No way you actually found one! I remember asking you to restore an AK-47 months ago, I believe it was on your Uzi video before you re-uploaded it, and you responded to me telling me "if you ever found one you would do it" and here you are. Amazing work, keep it up!

[@Krenzi_Fur]

Sorry to say hello its a AKM, if you were looking for a genuine AK47 you’d either be the luckiest man alive, or the richest.

[@hello9349]

@@Krenzi_Fur ok makes sense, I didnt know it was an AKM man damn 😔 still a badass restoration tho, love this guy👊🤙

[@GaMeRfReAkLIVE]

@@Krenzi_Fur to be fare not many people understand the difference in an AKM and an actual AK47 and the colloquial term for the kalashnikov family is just the AK, whether its a 47, 74, krinkov, or just modernized

[@MrNord44]

@@GaMeRfReAkLIVE Разница есть. Модели: АК, АКС, АКМ, АКМС, АК-74, АК-74С и прочее. АК-47 не существует, это АК (по советской классификации).

[@user-oz1ms8fn4y]

@@MrNord44 более того, на АКС 7.62*39, напялил новодельный приклад и цевьё от АКМ-74С 5.45*39, получив на выходе помесь бульдога с носорогом..

[@user-ds1rm6sz5s]

Служил с таким . 76 -78 . За службу сменил два . БЕ - 6289 , БИ - 366 . До сих пор помню . Иногда во сне - чищу ! 😀

[@aleksandryaremchuk8187]

...а просыпаетесь от того ,что из за плеча тянется рука страшины с белым платочком ?;-))))

[@rayallen9166]

@@aleksandryaremchuk8187 it’s all good until they check the chamber breech

[@aleksandryaremchuk8187]

@@rayallen9166 ай нот андестенд...:-)

[@bradleylabrosse5092]

This isn’t a Soviet rifle lol

[@romankataev4123]

@@bradleylabrosse5092 You may want to check your source, Bradley. This is AK - Avtomat Kalashnikov (rifle Kalashnikov - the inventor of this rifle in 1948 in the Soviet Union).

[@user-kf6nq3ui2g]

This Ak 47 was manufactured in the Russian city of Tula in 1971...there is a triangle with an arrow inside...) But instead of testing with aluminum oxide, it is better to do cleaning with aquablasting ...) And so it is very well done...the like is definitely from one of the subscribers ...)

[@MityaSkameikin]

Это не АК 47 (на самом деле автомат, выпускавшийся серийно, назывался просто АК), а его "наследник" - АКМ того же калибра (7,62 х 39 мм) образца 1959 года, о чём свидетельствует, как минимум, характерной формы дульный компенсатор с косым срезом (ранние АКМ с прямым срезом дульного оконечника/муфты в этом контексте не отличались от АК), а также отсутствие прямоугольного паза на правом боку ствольной коробки, которая у АКМ стала штампованной в отличие от фрезерованной у АК.

[@AndrewPayne]

Pure craftsmanship! Excellent.

[@jonmcclane7433]

The Bakelite magazine looks great in it. Terrific job, sir. I love AK’s.

[@bobdefalco]

Timer starts at 09:02 - stops 17 seconds later at 09:19. Elapsed time: 7.15 seconds. So fast you bent time. Amazing!

[@siegmeyerofcatarina9744]

He forgot about safety though

[@hiddenuchiha5959]

100% thought this

[@criminalcommunity5031]

Отличная работа, нельзя не поставить лойс 👍🔥

[@antonioe.gomezf.8430]

Brother, eres magnífico en tu trabajo. Saludos desde Colombia 👍

[@mooseman684]

As a Master Gunsmith that has built AK's , FAL's , etc I was Impressed at the condition after the rust removal of the metal receiver and parts. Great Job Restoring that ! I personally prefer wood stocks and handguards , or the Underfolder stocks which seem a bit sturdier, but to each his Own !

[@thepensmith1]

Building AK's is not exactly a "Master Gunsmiths" job but Im sure you knew that lol

[@mooseman684]

@@thepensmith1 I guess you never milled an AK Receiver Casting or replaced a trunnion , barrel and rivets , or built a receiver from scratch like I have , but i'm sure you know everything....

[@bigwig2096]

Now now guys…. Let’s just agree we all love guns and move on.

[@mooseman684]

@@bigwig2096 Sorry but I Love Women...Guns are just another tool for a specialized job. With over 45 years in the business of building everything from Sniper rifles to Machine guns for a Class 2 Manufacturer, to my own designs , I don't take kindly to smartass comments from some keyboard Commando.

[@obamabarrack1359]

​@@thepensmith1 building an ak is something a master gunsmith can do, yes, but nothing too scoff at. the ak was meant too, and did, and still does have entire factories and cities worth of people behind building them especially in soviet times. It was made with mass production and ruggedness in mind, with the specific machines made too do nothing but make parts for it, i challenge you too produce a kalashnikov type rifle/carbine/etc, you will then realize it is no easy feat, but once done CORRECTLY with the right materials you will have a weapon that can be passed down for generations.

[@russiannetrunner2984]

"Калаш" не надо реставрировать: нужно просто почистить и смазать!

[@wastirator__5413]

Зачем смазывать 🤔

[@russiannetrunner2984]

@@wastirator__5413 Как - "зачем"? А подсолнечным "нерафинированным? А смальцем???

[@chickensfloat7427]

We take kalashnalov to river to lubricate with water. We make shoot boolet, no more problem

[@chickensfloat7427]

"We are not suposed to own kalashnacov but we own kalashnakov anyway" my favorite quote from some old russain lady who worked at my local grocery store. Acording to my brother she makes really good lemonade

[@user-wg9yy2iv8j]

Пофакту

[@caoegato566]

you are not a gunsmith, you do magic 👏🏼😎💥

[@dewaldsteyn1306]

Hes just very good at it.

[@-_ghost_-5983]

Эстетичнее когда он все же в дереве) Но за проделанную работу однозначно ЛАЙК

[@monolitwoods]

I'm sure Brandon Herrera is smiling as you have saved a piece of iconic soviet history. Also good how you blessed it with vodka to cleanse its soul, this was amazing to watch))

[@user-iv1vk8eb9c]

Да,ты прав Брандон бы писал от радости

[@WillF1980]

HAHA facts. Now of only he would finish the ak50

[@youbite1]

Cringe

[@Cheezeball99999]

@@WillF1980 Good, fast, cheap. Pick any two. .. Usually, anyway. Hopefully we get to pick one in this situation because it hasn't been fast, and it won't be cheap 😬

[@dougbutcher4452]

Neat rivets too

[@rasmus1600]

9:02, my mans got the worlds slowest timer :D. Those 7,27 seconds feels more like 17 seconds

[@-redacted-7716]

lmaoo yeah nice catch

[@randx1075]

wysi

[@user-yn7rs6db2u]

it literally took him 18 seconds, yet it says it took him 7.15

[@blackwing1362]

uh, wood doesn't turn black when it gets old, it just sort of falls apart. that looks more like it has been burnt than anything

[@a7x_nomadiceagle482]

This is literally the best asmr I’ve ever encountered

[@bluedogguy]

It's always so sad to see magnificent guns that were neglected. I always look forward to the end. Nicely done.

[@nizzel_]

I mean so many of these fuckers were made people didn't (and still don't) care, it's sad from a US perspective bc this same gun is about 1500 to 2k if you can find one

[@polaroidwhite9037]

Yes, very sad. I cried and wept

[@SavHavoc]

This is AKM manufactured by IzhMash, or part of parts manufactured by IzhMash. A very rare and high quality rifle. Thank you for giving her a second life. Greetings from Russia.

[@youbite1]

It’s Romanian not Russian. The Russians used a two digit date code and the Romanians used a full 4 digit year. Also, the Romanian Arsenal mark while similar has the arrow touching the base of the triangle while the Izhevsk Arsenal mark has the arrow separate from the triangle and features fletching on the base of the arrow.

[@BNatoAk]

@@youbite1 ya I figured it was pm63 from the cuigar factory, but it's got the izhmash symbol on it. If you turn on subtitles he says it.

[@bloodking73]

@@BNatoAk the romanian mark looks almost identical

[@SpliefDaGrief]

@@youbite1 How do I go about learning the markings of the various eastern bloc weapon manufacturers. I too mistook the triangle izhmash

[@youbite1]

@@SpliefDaGrief various forums like the AK files

[@estebanmartinez7630]

A true work of art

[@swatmp360]

По рассказам моего бати, именно вот так он чистил свой автомат в армии 😄😄

[@user-sn2um4ij5n]

У меня не было покрасочной камеры... А так то, да...

[@Petya_na_baike]

09:19 - Ааа, мои глаза! Сперва контрольный спуск - на предохранитель, а потом магазин! А в целом товарищ молодец! Хорошая работа по восстановлению проделана.

[@jehova968]

У меня кстати перевод на русский говорит что это вообще ружье

[@user-du5jc9eq7r]

ну да, но там 2 ошибки! 1) Оружие не надо заряжать, ибо оно и так заряжено, поэтому и делают контрольный спуск!(заряжается при сборке) 2) Сначала спуск, потом магазин!

[@DrunkToy]

@@jehova968 мне говорит что это пистолет

[@MLY_1980_YLM]

@@user-du5jc9eq7r вообще при сборке было 3 ошибки не до конца вставлена 1 деталь не помню уже как называется и то что ты подметил(пишу не со своего аккакунта)

[@fearGod8]

For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life. -- John 3:16

[@alextumanniy5836]

Мастерская работа!!! Уважаю. Складные приклады - годная тема!!! С меня лайк, однозначно!!!)😎

[@alextumanniy5836]

@@user-rc8qu9py8i это ж где, такая подготовка, если не секрет???

[@pavlo_remenko]

Мне тоже стоковый приклад не нравится, но складной рамка или телескопический будет покруче, чем вот этот кусок проволоки 6-ки... И магазин если я не ошибаюсь от РПК на 40 патронов... P.S. не забудь поставить на предохранитель)))

[@repsajann8199]

A modern AKM with polymer handguard,bakelite mag and no more wood parts. Amazing

[@BAdventures]

Great work and project. Well done! 👍

[@dr.pastrami5272]

He went above and beyond in treating the small parts and repainting it. A rifle with a reputation of being " just good enough" The chemical rust treatment, removing the rotten wood & adding a new stock could've been enough. Glory to Arstotzka!

[@m.i.5381]

You must be a Quack Dr ! with that statement. This rifle is legendary worldwide: the most used, the most reliable, most easily serviced parts.

[@lionclaws1880]

"just good enough" wtf?

[@dr.pastrami5272]

@@lionclaws1880 Yeah. Its a compliment for being simple and reliable. "Its not the most accurate, nor the most elegant, but it doesn't need to be. Its good enough." -Stuart Brown (Ahoy)

[@getonthecrossanddontlookba5004]

Repent to Jesus Christ “Jesus answered, “It is written: ‘Man shall not live on bread alone, but on every word that comes from the mouth of God.’”” ‭‭Matthew‬ ‭4:4‬ ‭NIV‬‬ K

[@abdullahtshabal9522]

@@dr.pastrami5272 sweet, another xboxahoy fan

[@aaronskinner9224]

I’m not sure how you come across all the old rusty and dilapidated guns but my god you do an awesome job giving them new life!

[@Shizenburger]

proberly from the ak guy

[@seekhimwithallyourheartand3358]

Repent to Jesus Christ “He says, “Be still, and know that I am God; I will be exalted among the nations, I will be exalted in the earth.”” ‭‭Psalms‬ ‭46:10‬ ‭NIV‬‬ K

[@bobscott117]

He doesn't he makes stuff look old and rusty! He's a KZbin talentless joke!

[@-Sirens-]

Easy, go buy cheap junk rifle, then leave it outside in the rain for a couple months, now you’ve got a new rusty project to pretend you’re saving a rifle on youtube!

[@bobscott117]

If you believe this clown I'm sure he has a bridge to sell you

[@nikolaivista920]

Restoring the greatest assault rifle in the history of humanity! Nice!

[@eriabelira2362]

VC é o cara vídeo da hora parabéns Brasil

[@user-wh4ft7hk5e]

Похвально, увлекательно смотреть восстановление АК 70 х годов. У автора золотые руки. Жаль что можно поставить только один 👍

[@xXx_Felixx_xXx]

Это АКМ

[@shuninv]

У всех стереотипы по поводу Калашникова, у них все ак 47, хотя реальные АК 47 практически невозможно найти, все что называют АК 47 это по факт АКМ

[@lukesams3349]

The minimal amount of restoration work required for this weapon really is a testament to its rugged design

[@MrBaricore]

Концерн Калашникова уважают во всём мире! Оружие не прихотливое и в тоже время простое в обслуживании 👌 Американские карабины страдают от перегрева,экономят на металле😕

[@HardeepSingh-ex2hq]

Ush

[@DirtRider999]

What about inside the barrel though?

[@mmdirtyworkz]

@@DirtRider999 yep, that wasn't shown so I suspect it is ruined

[@russellwall1964]

I do like a good folding stock. Makes the weapon more compact, easier to move in tight spots or heavy brush. Then unfold when the added support is called for. Beautiful work on a classic weapon!

[@albatro2676]

WOOD... I would prefered wood, as original

[@bensnyman2333]

Well done. I would have liked to see the wood replaced by wood again, but a very good restoration.

[@elizabeatriz6953]

Qual o produto para tirar o ferruge

[@skibooski6884]

Wood looks nice but polymer is just better in the long run

[@user-ch3cn9kb6v]

@@skibooski6884 полимер не очень хорошо во время Русской зимы...))) Дерево лучше! )

[@skibooski6884]

@@user-ch3cn9kb6v nyet

[@user-ch3cn9kb6v]

@@skibooski6884 приезжай к нам в гости зимой. Сам узнаешь! ))) Доброго дня тебе! )

[@abdelmalekbeo7576]

Epic! A pleasure to watch this gifted young man reviving stuff. Thank you for sharing your videos with us.

[@text-9512]

Congratulations you're I've shortlist among our winners contact number above ⬆️⬆️.......

[@Michael-ht4wt]

3:44 Ходят слухи, что одна Бабушка, всё ещё ищет свою банку)

[@fatboysflstbs]

Absolutely brilliant. Love it.

[@gorjearies410]

M 16 ak m 74

[@user-hq3rj3ix2e]

incredible amount of work done, looks amazing. But in my opinion it would be better if you ordered a regular, original stock, wooden, which was on AKM, or plastic, which then appeared on the AK74M. Greetings from Russia ;)

[@josephcirilo547]

Ngl, was a little disappointed he didn’t go with wood. Even rotted to pieces, that lower hand guard was beautiful

[@PecheurDeTresors]

Nice job broo ! Really interesting, I hope to magnet fish one one day so I can restore it!

[@gilbertchabrolles4208]

Your guns are also beautiful !

[@ericrapito4414]

Yeaaah

[@doublezzranch849]

LOL, I'm always worried about the history of a gun I pull from the water.

[@ginobragoli1448]

Magnet fish one, where do you live Baghdad? 😂

[@doublezzranch849]

@@ginobragoli1448 : 😂 Almost that bad, it was in Detroit Michigan. Cops would stop us if we went close to Angel Part, a well know spot for Cops & criminals to dump guns for a reason.

[@user-yz2md5mr3x]

9:16 в начале спуск, а потом присоединение магазина ,т.к. если в магазине патроны, то будет выстрел:(

[@ivanbrz.7917]

Mi hermano que buen trabajo!!! te felicito por la calidad de tu laburo.

[@user-sf7nm7ut3c]

Чувак!Ты просто-тульский оружейник!Это было круто!Калаш-это Легенда!Это просто гениальное и лучшее в Мире оружие!!!Ждем испытаний на стрельбище!!!Удачи!!!!

[@Sa.hftsdwdr]

Я сам был в ахуе. Красавчик!

[@user-zv7eg4sm6s]

Реально прозрел. Отличная реставрация.

[@lilipop6990]

думаю така как экспонат ..не для стрельбы 😾

[@comradebusman3]

While I simultaneously wish that you uploaded more frequently, I also understand that this takes a lot of work to both restore and to edit. Great as always, I’ve watched it to sleep to every night since the release.

[@haroontopa9073]

A plus task completed by master ❤️

[@VictorSilva-jd2ph]

Sou do Brasil e gostei muito desse canal , parabéns um ótimo conteúdo e valeu pela legenda 💚💛

[@knight8825]

This is probably the best restoration I’ve ever seen. Beautiful work.

[@michaelrigal2090]

This is so immensely immepressive I thoroughly enjoyed each moment of construction and restoration of such an elegant tool

[@makeshiftusec992]

There isn't anything elegant about an AK come off it

[@michaelrigal2090]

@@makeshiftusec992 It was a unique rifle at the time it was created. Countless countries have used it and created variants it's a pretty sick rifle and I am off of it just was enjoying the vid. Chill completely out you don't have to get so bothered

[@interiorconectadoporkleber6754]

Muito Bom! Trabalha Com Restauração De Todos Os Modelos De Armas?

[@aliamir6843]

dang you got great taste in rifles

[@getmeoutofsanfrancisco9917]

@@makeshiftusec992 What? Why not? You are arguing about something completely subjective lmao

[@ALKEMIVARAN]

Que arma tan gloriosa me hubiera gustado verla con madera pero sin duda luce increíble así también

[@khangnguyendinh6980]

Isn't it amazing to see an ak 74 made in 1971 firing again :D beautiful work but i like the original wood parts more than the new composite part :D

[@TesticleStealer]

AKM

[@rognvaldrasbjrn3972]

That is one of the most beautiful weapons. Simple, reliable, rugged, effective, efficient. Thank you for the love you put into it!!

[@user-uw8lz9rp7y]

Сам из какой страны?

[@jimhoxworth8655]

I didn't think I was gonna like the way it turned out, but it looks amazing. You did a fantastic job

[@dramit4635]

Excellent restoration 👍👍👍

[@balamutmahmut]

Прошла одна минута видео, и автомат к бою готов!

[@thelion7210]

fantastic! I was floored when you snapped apart the original hand guard but I have to say the end result was lovely. nice job!

[@aoquanghuy7641]

Same

[@noahnewcomer5180]

I absolutely love this! As a gun guy and an AK fan I absolutely love everything about this video!!! beautiful rifle 😍😍

[@hugobidinost2705]

impresionante. Todo un maestro en restaurar armas. Muy bueno los detalles de los pepinos y el Vodka jajaja. saludos

[@randomiction5429]

the wood is actually burnt didn’t notice that. nice try, but you will be sent to the shadow realm

[@FerreusNRG]

its no old actually old rusted riffle because wooden handle partly burnt? o.O

[@greenbrickbox3392]

@@FerreusNRG very unusual for an AK to have a burnt handle on the outside while not being burned on the spots touching the barrel. Almost as if someone took a torch to the handguard intentionally to make the gun look more weathered and given how fake the Desert Eagle video is, I wouldn't put it past this video that the gun was further rusted and burnt to make it look much worse than was originally received.

[@TACNERD1]

Great restoration, I'm not sure some of that disassembly was necessary but bravo for going to that length for the video.

[@willybober2]

Go lay down

[@htoosaw9012]

It is necessary

[@frankrizzo3079]

Arm chair quarterback

[@isawit9722]

Restoration means completed as if new....

[@TACNERD1]

To all those chiming in. I work on AKs, as well as restore furniture and items I find in thrift stores, it's why these videos intrigue me. IMO, it was not necessary to remove the barrel (unless it was pitted and needed replacing, which the video didn't say). As he said you need a press to remove and install but it was commendable all the same. A 10-ton press is really best to do this but the average person does not have access to one in their garage. Also, the trigger guard was iffy as to necessity but again commendable and nice to see it done, his videos are top-notch. It's possible that it could continue to rust between the guard and receiver but unlikely with minimal care, these are AK's after all. Also, possible that the rivets were loose, and if that's the case then that would be a good reason for replacement. Thanks again for the video, your work is always great and I love watching them! Please do more like this!

[@j.peters1222]

I love the wire stock you added. I have an AK with the same black plastic furniture as well

[@muammerbjk1660]

Very nice work, you modernized a scrap ak 47, it's great, congratulations

[@Dangerpurple]

Looks like it could shoot just fine at the start!

[@chrisvarns8584]

Love the videos, and I enjoyed this build. I was just sorry to see plastic parts added where there was once wood.

[@SouthValleyKnifeCo]

Polymer is going to be the future. Polymer also withstands many many environments much better

[@chrisvarns8584]

@@SouthValleyKnifeCo I don’t disagree the polymer is a good product and would last longer…. But this is a relic from the past; Not a firearm of the future. I think it would be much lovelier and authentic if he stuck to wood. 🤷🏻‍♂️

[@SouthValleyKnifeCo]

@@chrisvarns8584 that particular furniture is cannon for them. So I would argue its just as at home on that gun as it is on another one

[@harrybaules]

@@chrisvarns8584 Agreed.

[@user-nj2rq7hb3m]

me to

[@SuperHuskyPower]

The best part about this whole video is no crappy music in the background. Great job

[@Norton1531]

As soon as you ate the gherkin and downed the vodka, that was me sold!!! 💪🏻

[@Point-ds1rw]

А можно сделать видео как быстро почистить если такой выдали во время мобилизации?

[@M_V_L]

R.I.P Conscriptovitsch

[@baneofbanes]

Simple. See Ukrainian. Drop gun. Raise hands. Surrender.

[@Point-ds1rw]

@@baneofbanes если не пристрелят до этого, или не размажут по земле артилерией

[@againreyzir4368]

Вставил магазин, перевернулся затвор и выстрел. Сэр, да вы мастер сборки ак))

[@masters_of_Kherson]

Подсрачник от сержанта прилетел бы раньше, чем успел бы дёрнуть затвор с пристёгнутым магазином! Сначала производится спуск и постановка на предохранитель. А потом пристёгивается магазин. 🤣

[@Gospodin_Uef]

А мне больше понравился процесс покраски ствола.... Интересно - он его только снаружи покрасил, или и внутри??

[@oktazer4072]

Реставрацию можно было заканчивать на первой минуте. Он уже был готов к стрельбе, это же калашников!

[@fcos1921]

Hahahahah

[@the_crow383]

Причем стрелял бы как новый, как только с конвейера

[@riddick16ua]

Ага. Без затвора,поршня,ударника и пружины. Как палка.

[@deppresedonion6320]

10/10 restoration again .

[@seanmiller5984]

Love how he tried to make it look like he put it together in 7 seconds on his slow timer. Actually took him 20

[@MikeA817]

Now to take it to the range. Absolute beautiful restoration. I'm curious what work you had to do to the barrel and what condition it was in.

[@robertad8433]

Have you noticed that the gun had no bolt a carrier before ? Have you noticed it had 1 after he was done ? I am assuming there were not with the gun and i am assuming he didn’t check for headspace … bad idea to take to the range don’t you think ?

[@eddiespaghetti54321]

I think that’d be a very bad idea

[@JamesNeave1978]

I think a few x-rays first. There might be a very good reason it was chucked.

[@lordXguru]

@@robertad8433 thats exactly what I was thinking, some cheap go and no go gauges can save your face from shrapnel.

[@MikeA817]

I'd posit that was taken care of off-screen. Putting an AK together is harder than it looks, especially compared to the "adult legos" of ARs.

[@covid-209]

В принципе, после того, как его достали из кислоты, реставрацию можно считать оконченной) Автомат Калашникова уже готов к бою P.S.: Магазин присоединяется в последнюю очередь)

[@user-ce4ql5du5g]

Да он и так был готов это же калаж спусковой почистил и в бой😅

[@RBDOne]

Видео странное. На первых кадрах видно, что отсутствует затворная рама, затвор и возвратка. На чем тогда держится крышка? Откуда потом появились, отсутствующие в начале узлы?

[@user-cp7em2bt1q]

Верно армейцы здесь) Техника безопасности в первую очередь!!! Брэндон и Мэт вечно ею пренебрегают) Американцы)))

[@Nord_NPR]

Без затвора не особо постреляешь.

[@user-jm3fc8ni6w]

Да и теплозащитный экран пластиковый, набор для страйкбола

[@jehadkaled2918]

Amizing work 😎😎😎😎

[@AbdouAbdou-zu7mm]

a piece of art 🖤

[@Russinh0]

Waiting for this vid a decades, finally a classic gun with Wood parts i love the shiny Wood

[@GameMaster.]

Looks nice but you should check the head space and inspect the barrel before shooting it 7.62x39 is very powerful round and if something is wrong the rifle can be damaged

[@EgorKaskader]

The rifle, but more critically, the *shooter* can get damaged. Getting Kentucky'd isn't a good plan to have for the day.

[@devr8209]

Idk why you did all that work. That gun was in perfect working order.

[@user-ij4vv5cy5f]

Самый надёжный в мире автомат! Неприхотлив и ремонтируется на коленке. Оружие масс.

[@AndreyMR2]

Хорошая работа! Пистолетную рукоятку и другие элементы можно ставить уже тюнингованные. Такой приклад при интенсивной стрельбе 7,62 будет отбивать плече)

[@Dcon-ff7zj]

Акм калибра 5.45 а не 7.62

[@pavlo_remenko]

@@user-ww7xp9fj1i АКМ-74 - 5.45, АК-47 - 7.62

[@leandrolozada7500]

Quedó excelente. Me gustan los cambios y arreglos que le hizo. Saludos desde Colombia y felicitaciones por los videos.

[@_pravda...]

Хорошая работа видна рука мастера!

[@PUNGKY_TAKASAKI]

wow menakjubkan...kerja yang bagus👍🏻💯

[@Skobar4277]

Дружище, NEVER НИКОГДА не делают контрольный спуск после присоединения магазина. Потому, что именно из-за этого будет выстрел. Контрольный спуск делается для того, чтобы убедиться, что в стволе нет патрона, а не для того, чтобы просто щёлкнуть. А работа прекрасная. Like.

[@user-sn2um4ij5n]

Насколько помню...При сборке контрольный спуск не делают вообще. Сметали в кучу и всё. Сорок лет прошло... Номер своего АК-74 в голове...

[@ijoeysnake]

Beautiful. It is amazing how much work it takes. You are very patient and crafty sir

[@pavementpariah7342]

You have no idea how much it hurt my soul to watch you paint that gun. 😫😫😫